Professional Documents
Culture Documents
04
Date : 3/22/2023
Page : 1/4
Comment :
Conditions
Installation conditions : Dry concrete
Short term temperature : 40 °C
Long term temperature : 24 °C
Anchor plate
Thickness of part to be fixed : 25 mm
Recommended plate thickness : The base plate thickness has not been checked
Clearance diameter : 22 mm
Profile : 310 UB 40.4
Profile position : Ex = 0 mm ; Ey = 0 mm
Stand-off : None
Combination 1 seismic 0 54 54 0 0 0
Specifications :
Seismic category : C1
Structural Elements
Working life : 50 years
Building importance class: II
Seismicity level (AS 5216:2021 - Table F.3.1): ag.S ≤ 0,05.g
No filled holes
Design options::
Ref : 3/22/2023 - 11:09:52 AM / Version 2022.11.04
Date : 3/22/2023
Page : 2/4
Geometry :
Calculation Hypothesis :
- The anchoring plate is assumed to be sufficient to resist deformation imposed by the load actions.
- Connection between profile and base plate has not been checked
- RAMSET can only be held responsible if the calculation examples exactly reflect the application and if the installation is carried
out according to the instruction given in the RAMSET specifications. The calculation is correct for RAMSET anchors only. The
contractor or specifier should make sure that the base material is able to support the loads especially in the case of a group of
anchors. RAMSET cannot be held responsible if this software package is modified without its written approval.
Ref : 3/22/2023 - 11:09:52 AM / Version 2022.11.04
Date : 3/22/2023
Page : 3/4
Loads on anchors
4 0 kN 13.5 kN 13.5 kN
0 0 0 0
76.37 19.09
Utilization
Steel failure / / /
INSTALLATION DATA
EPCON C6 Plus + Typ. Threaded Rod Grade 8.8 M20 / hef = 205 mm Product Code: NA
Effective embedment : 205 mm
ETA-18/0675 issued 2021/06/06
INSTALLATION Method