Professional Documents
Culture Documents
FACULITY OF ENGINEERING
DEPARTMENT OF CIVIL ENGINEERING
Strength of Materials Mid-term Examination for 2nd year CED ext students
3) Draw the shear force and bending moment diagrams of the beam AB for the
loading condition on the beam shown below, and determine the maximum shear
Misrak Tefera 1
Strength of materials mid Exam Dec 2007
force and bending moment. (The 12kN force is applied at the centroid of the
cross-section.)
4) An overhanging beam ABC has rectangular cross-section with width b and height
h. Knowing that the maximum stress (principal stress) at point D is 1 = 35
MPa, determine
i. The magnitude of load P
ii. The maximum shear stress at D
Use L=2m, b=50mm, h=200mm, and d=75mm……………25%
Bonus:- A prismatic bar is loaded as shown in the figure below has permanent
deformation. Can we use (PL/AE) to calculate the total change in length? Why?
…………………………………………………….. (3.0 Points)
Good Luck!!!
Misrak Tefera 2
Strength of materials mid Exam Dec 2007