Professional Documents
Culture Documents
Instrument Detail
Instrument : Standard Weight
Manufacturer : N/A
Model : N/A
Serial No. : N/A
Range : 0.0 kg Up to 10.0 kg
Resolution : 0.25 kg
The result of calibration shown relates only to the instument being calibrated as described above
Instrument Condition
Before Calibration : Physically good
After Calibration : Calibrated and tested servicable
Location Of Calibration : Bilik Pemeriksaan
Enviromental Condition
Ambient Temperature : Max: 24.8 °C Min: 24.5 °C
Relative Humidity : Max: 57 %r.h. Min: 55%r.h.
The instrument has been calibrated on site under the enviromental condition as stated above.
Calibration Method : The calibration was based upon Calibration Procedure MLC-CP-M001
The reference standard used are traceable to either the national standards maintained at the National Metrology Institute of Malaysia,
SIRIM Bhd. Or other recognised International Standard Laboratories.
Reference Standard ID. No. Serial No. Traceable Due Date Certificate No.
Standard Weight MLC/SW(2~8) NIL MLC 2-Sep-23 STM1809-0080-1
Standard Weight MLC/SW(16~17) NIL MLC 22-Jan-23 MLC/SW 16~17/1905
Approved Signatory
Fadhilah Yusoff
Technical Manager
Copyright of this certificate is owned by the issuing laboratory and may not be reproduced other than in full except with
the prior written approval of the Head of the issuing laboratory.
Calibration Result
The result of calibration shown only relates to the range calibrated.
10.0 0.0
Repeatability Test
1/2 Max
Test
Max
Load
0.0 10.0
Standard 0.0 0.0
Deviation
Uncertainty
The expanded uncertainty of the calibration result is given ± 0.5 kg
Coverage Factor, K = 2
Calibrated By
Aiman
Assistant Engineer
Date Received : -
Date Calibrated : 17 September 2020 calibration date specified by client : 16 September, 2021
The User should be aware that any number of factors may cause this instrument to drift out of calibration before the specified calibration interval has expired.
Instrument Detail
Instrument Condition
Before Calibration : Physically good
After Calibration : Calibrated and tested servicable
Location Of Calibration : On Site as Address Above.
Environmental Condition
Ambient Temperature : Max : 22.0 °C Min : 18.0 °C
Relative Humidity : Max : 60 %r.h. Min : 40 %r.h.
The instrument has been calibrated on site under the environmental condition as stated above.
Calibration Method : The calibration was based upon Calibration Procedure MLC-CP-M001.
The reference standards used are traceable to either the national standards maintained at the
National Metrology Institute of Malaysia, SIRIM Bhd or other recognised International Standard Laboratories.
Reference Standard ID. No. Serial No. Traceable Due Date Certificate No.
Standard Weight Set MLC/SW1A MLC/SW1A SST & NMIM 13-Jun-21 SST/SA/IR/2020F/1550
Standard Weight MLC/SW(2~8) NIL SST 7-Aug-20 MLC/SW2~8/1908
Standard Weight MLC/SW(9~15) NIL SST 7-Aug-20 MLC/SW9~15/1908
Standard Weight MLC/SW(16~17) NIL SST 7-Aug-20 MLC/SW16~17/1908
Approved Signatory
................................
Al - Afiq Bin Nekmat
Technical Manager
Copyright of this certificate is owned by the issuing laboratory and may not be reproduced other than in full except with the prior
written approval of the Head of the issuing laboratory.
CERTIFICATE NO. : MLC/M1904/S0023
Page 2 of 2
Calibration Result
expired.
Nominal Value Correction
(g) (g)
Uncertainty
The expanded uncertainty of the calibration results given is ± 0.04 g.
Coverage factor : k =2.00
Calibrated By
................................
Mohammad Faez Fathi Bin Abd. Hadi
Assistant Engineer
HOOK SCALE
KLINIK DESA RINCHING TENGAH
NO. EQUIPMENT SERIAL NO. MODEL REMARK
1 HOOK SCALE 11KG JATI-M0052 HERTZ UNIT FIT TO USE
2 HOOK SCALE 11KG JATI-M0053 HERTZ UNIT FIT TO USE
3 HOOK SCALE 11KG JATI-M0054 HERTZ UNIT FIT TO USE
4 HOOK SCALE 11KG JATI-M0055 HERTZ UNIT FIT TO USE
5 HOOK SCALE 11KG JATI-M0056 HERTZ UNIT FIT TO USE
6 HOOK SCALE 11KG JATI-M0057 HERTZ UNIT FIT TO USE
STANDARD WEIGHT
KLINIK DESA RINCHING TENGAH
NO. EQUIPMENT SERIAL NO. MODEL REMARK
1 STANDARD WEIGHT 2KG JATI-M0056 SWPI UNIT FIT TO USE
2 STANDARD WEIGHT 2KG JATI-M0016 SWPI UNIT FIT TO USE
3 STANDARD WEIGHT 5KG JATI-M0058 SWPI UNIT FIT TO USE
4 STANDARD WEIGHT 5KG JATI-M0225 SWPI UNIT FIT TO USE
5 STANDARD WEIGHT 5KG JATI-M0017 SWPI UNIT FIT TO USE
6 STANDARD WEIGHT 5KG JATI-M0059 SWPI UNIT FIT TO USE
7 STANDARD WEIGHT 10KG JATI-M0018 SWPI UNIT FIT TO USE
8 STANDARD WEIGHT 10KG JATI-M0226 SWPI UNIT FIT TO USE