Professional Documents
Culture Documents
IFR 6000
XPDR/DME/TCAS/ADS-B/TIS/TIS-B TEST SET
SOFTWARE/FIRMWARE UPGRADE
Purpose
The purpose of this document is to describe the changes from Software Version 1.00 to
1.01 for the IFR 6000.
Aeroflex
Customer Service Dept.
10200 W. York
Wichita, KS 67215
Added/Enabled Features
DME Mode:
z DM E % R ep ly f u nc t i on
z DME Echo function
z DME Ident function
z Active slewing of field values while running a test
z Direct Connect Cable loss field
z NO INTERR annunciator if an on-channel DME is not detected
z Separate Direct Connect cable loss field
XPDR Mode:
Page 1 of 2
Sep 1/05 1002-5800-9P1
SUMMARY OF CHANGES
IFR 6000
XPDR/DME/TCAS/ADS-B/TIS/TIS-B TEST SET
SOFTWARE/FIRMWARE UPGRADE
Corrections/Enhancements
DME Mode:
XPDR Mode:
z Mode S SLS direct connect test limit for reply ratio is 99/100
z Mode S SLS over the air test limit for reply ratio is 90/100
z Corrected ATC SLS -9 dB output level
z Power Test A-C difference now checks for a maximum of 1 dB difference
z Corrected spelling of MCP/FCU SEL ALT
z Corrected limits of ITM A/C from 128.00 (±0.25) to 128.00 (±0.50)
z Corrected INVERT VERT VEL to INERT VERT VEL on Enhanced Surveillance screen,
BDS 6,0
z Added reply delay compensation for physical distance during over the air testing
z Corrected ITM REPLY ADDRESS display garbling
General:
Page 2 of 2