The document lists discrepancies found in BBTY logic versions, including proving certain signals, replacing logic components, removing unnecessary signals and logic, and making timing changes according to various references. It identifies specific logic modules and signals that need changes to address issues found in the BBTY logic version 05.0000.
The document lists discrepancies found in BBTY logic versions, including proving certain signals, replacing logic components, removing unnecessary signals and logic, and making timing changes according to various references. It identifies specific logic modules and signals that need changes to address issues found in the BBTY logic version 05.0000.
The document lists discrepancies found in BBTY logic versions, including proving certain signals, replacing logic components, removing unnecessary signals and logic, and making timing changes according to various references. It identifies specific logic modules and signals that need changes to address issues found in the BBTY logic version 05.0000.
1. In all EGNR logic, concerned NRRs↓ should be proved.
2. Prove both NLR_INT & RLR_INT drop in button operation path, in WNR_INT/WRR_INT logic in place of NLR/RLR. 3. NWKR – prove RWK1R ↓ and in RWKR – prove NWK1R ↓. 4. In WLR logic, remove SMCR as per GR/SR correction slip for pilot in without clamping. 5. In NNCR logic, STR=10 Sec. should be provided as per IRSEM. 6. In 31WR & 33WR button logic, prove concerned Point Block↓. 7. Line Block↓ to be removed from all NRR logic as it is already proved in concerned UNR logic. 8. ALL_UNBLK logic is not required. Delete the ALL_UNBLK logic and remove from all concerned logic.