You are on page 1of 2

Introduction 6. Touch the CONTROLS tab to show the DVD controls.

The
How to Set the Cabin Shades
This guide provides an overview to easily navigate the DVD controls include the PLAY, PAUSE, STOP, REV
1. Touch the CABIN (Reverse), FFWD (Fast Forward), and SKIP buttons.
Wireless Passenger Control Unit (WPCU) menu. The
category button on the
categories may be divided into menus of subcategories. Select
left-side of the touch
a menu by touching the desired menu button on the main
screen.
menu. Some of the subcategory menus are divided into areas
2. Touch the SHADES
by tab pages. Select the tab that contains the controls you
button on the cabin main
need.
menu page. The shades
The WPCU provides control for the cabin entertainment control page shows on
source selection and entertainment source control. The WPCU the touch screen.
menu is divided into the four categories that follow: 3. Touch the LEFT or
RIGHT button to select
• CABIN
the shade zone.
• AUDIO/VIDEO (A/V) 4. Touch the UP or DOWN
button to adjust the
• SPEAKER
shades in the zone How to Start the Satellite TV (SAT TV)
• MONITOR. selected in the previous step.
1. Touch the A/V category button on the left-side touch
screen.
How to Set the Cabin Temperature 2. Touch the SAT TV button on the A/V main menu page.
How to Show the Cabin Category
1. Touch the CABIN category button on the left-side of the The SAT TV control page shows on the touch screen. How to Start the Compact Disc (CD)
1. Touch the CABIN category 3. On the Select tab page, touch the SAT TV button to toggle
touch screen. 1. Touch the A/V category button on the left-side of the touch
button on the left-side of the between the possible SAT TV receivers.
2. Touch the TEMP button on the cabin main menu page. screen.
touch screen to show the 4. Touch the FWD MON or AFT MON buttons to show SAT
The TEMP control page shows on the touch screen. If the 2. Touch the DVD/CD button on the A/V main menu page.
cabin category main menu. TV programming on the selected monitors.
TEMP control page, cockpit control shows on the touch The CD control page shows on the touch screen.
The main page has the 5. Touch the MENU tab to show the SAT TV controls.
screen, then the adjust cabin temperature function on the 3. On the Select tab page, touch the DISC button to toggle
LIGHTS, PRESETS, 6. Touch the GUIDE button to show the on-screen program
touch screen will be disabled. Adjustments can only be between the possible CDs loaded in the DVD/CD player.
SHADES, and TEMP (cabin guide with the program channels. Use the arrow keys to
made from the cockpit. 4. Touch the CONTROLS tab to show the CD controls. The
temperature) buttons. select a program and then touch the ENTER button to
3. Touch the up or down arrow buttons to adjust the CD controls include the PLAY, PAUSE, STOP, REV
temperature. view the program.
(Reverse), FFWD (Fast Forward), and SKIP buttons.
7. Touch the KEYPAD tab to show the SAT TV keypad
window. Enter the desired satellite channel number.

How to Set the Cabin Presets


1. Touch the CABIN category
button on the left-side of
How to Set the Cabin Lights
the touch screen.
1. Touch the CABIN category button on the left-side of the 2. Touch the PRESETS
touch screen. button on the cabin main
2. Touch the LIGHTS button on the touch screen. The Lights menu page. The presets
control page shows on the CABIN main menu page. For control page shows on the
baseline configuration, the Lights control page has two tab touch screen.
pages (WASH and OTHER). The OTHER tab page has the 3. Touch the DAY or NIGHT
cabin light quickset buttons. For the option configuration, CRUISE preset button to
the Lights control page has three tab pages (FWD, AFT, select the cabin setting
and OTHER). The OTHER tab page has the cabin light desired. How to Show the Audio/Video Category How to Start the XM RADIO
quickset buttons. 4. Touch the FWD or AFT 1. Touch the A/V category button on the left-side of the touch
3. Touch the WASH tab or FWD/AFT tab to show that tab 1. Touch the A/V category button on the left-side of the touch
MOVIE VIEWING preset screen to show the audio/video category main page. The screen.
page. How to Start the Digital Video Disc (DVD)
button to select the cabin main menu shows the SAT TV, XM RADIO, DVD/CD, CD 2. Touch the XM radio button on the A/V main menu page.
4. Touch the + (plus) or – (minus) arrow buttons to adjust the setting desired. 1. Touch the A/V category button on the left-side of the touch The XM radio control page shows on the touch screen.
brightness. CHANGER, CAMERA, CARRY-ON, and AIRSHOW screen.
buttons. 3. On the Select tab page, touch the XM button to toggle
5. Touch the OFF button to turn the lights off. 2. Touch the DVD/CD button on the A/V main menu page. between the possible XM receivers.
The DVD/CD control page shows on the touch screen. 4. Touch the MENU tab to show the XM controls. Use the
TIP: Use the left/right arrows on the top of the touch screen to 3. On the Select tab page, touch the DISC button to toggle arrow keys to select a program and then touch the ENTER
change the subcategory. between the possible DVDs loaded in the DVD/CD player. button to listen to the program. Touch one of the
4. Touch the MENU tab to show the DVD controls. PRESETS buttons to listen to a preset channel.
5. Touch the MENU button to show the DVD menu. Touch 5. Touch the KEYPAD tab to show the XM keypad page.
the arrow keys to navigate the DVD menu. Touch the Enter the desired XM radio channel number.
ENTER button to select the menu item.
• Touch the ◄ (left) or ► (right) arrow buttons to adjust
the CABIN SPEAKER BALANCE slider bar.
• Touch one of the CABIN SPEAKER EQUALIZER
buttons to adjust the amplifier equalizer.
• Touch the DRC (Dynamic Range Compression) button
to change between on and off.

CES Cabin Electronics System


for the Bombardier Challenger 605
WPCU

Quick Start Guide

How to Start the Carry On Function


How to Start the CAMERA 1. Touch the A/V category button on the left-side of the touch
1. Touch the A/V category button on the left-side of the touch screen.
screen. 2. Touch the CARRY ON button on the A/V main menu page.
2. Touch the CAMERA button on the A/V main menu page. The Carry On control page shows on the touch screen.
The Camera control page shows on the touch screen. 3. Touch the SELECT button to choose the video or audio
3. Touch the FWD MON or AFT MON monitor selection device connected to the cabin port.
button to show the camera video on the selected monitor. 4. If carry on device has video output, touch the FWD MON
or AFT MON monitor selection buttons to show the carry How to Select the Monitor Video
on video on the selected monitors.
1. Touch the MONITOR category button on the left-side of
5. If carry on device has audio output, touch the SPEAKERS
the touch screen. The Monitor control page shows on the
button to play carry on device audio over the cabin
touch screen.
speakers.
2. Touch the ◄ (left) or ► (right) buttons at the top of the
page to select the FWD or AFT bulkhead monitor.
3. The CABIN VIDEO window shows the current video
source.
4. The POWER button turns the monitor on or off.
How to Start the AIRSHOW 5. Touch the SELECT button below the FWD BULKHEAD
MONITOR line. The pop-up window menu shows the
1. Touch the A/V category button on the left-side of the touch possible selections.
screen. • Touch a button to select the desired video source.
2. Touch the AIRSHOW button on the A/V main menu page.
• Touch the MORE button to scroll through other
The Airshow control page shows on the touch screen. NOTICE
options.
3. Touch the FWD MON or AFT MON monitor selection
• Touch the X button to close the pop-up window. INFORMATION SUBJECT TO EXPORT
button to show the Airshow network on the selected CONTROL LAWS

monitor. How to Start the CD Changer (CHGR) The technical data in this document (or file) is
controlled for export under the Export Administration
4. The Airshow selection buttons have the Airshow network 1. Touch the A/V category button on the left-side of the touch Regulations (EAR), 15 CFR Parts 730-774. Violations

functions that follow:


of these laws may be subject to fines and penalties
screen. under the Export Administration Act.
• YOUR FLIGHT shows the flight plan origin and 2. Touch the CD CHGR button. The CD changer control page Export classification number (ECCN) number for this
destination map. shows on the touch screen. document is 5E991.

• AUTO PLAY shows the Airshow slideshow. 3. Touch the PLAY, PAUSE, STOP, REV (Reverse), FFWD How to Adjust the Cabin Speaker Audio
• MAPS shows the maps of the world. (Fast Forward), and SKIP buttons. 1. Touch the SPEAKER category on the left-side of the touch
• LOGO shows selected logos in the slideshow. 4. Touch the PREVIOUS or NEXT buttons to switch to the screen. The Speakers Control page shows on the touch
• RLI shows the relative location indicator with nearby previous or next CD. screen. The Control page has two tab pages; AUDIO and © 2008 Rockwell Collins, Inc.
points of interest. 5. Touch the SPEAKERS button to play CD audio over the SETTINGS. All rights reserved.
• HIGH RES shows the high resolution maps. cabin speakers. 2. Touch the AUDIO tab to show the speaker controls. The Printed in the USA
• NETWORK shows the Airshow network programs. Audio Tab page has the audio select buttons.
• WEATHER shows the worldwide weather. • Touch the SELECT button to listen to that audio
523-0808877-002117
• INTERACTIVE shows the additional options available source.
2nd Edition, March 20, 2008
to the user. • Touch the + (plus) or – (minus) arrow buttons to adjust
the cabin volume. Rockwell Collins, Inc.
• Touch the MUTE button to mute the cabin speaker
audio.
3. Touch the SETTINGS tab to show the speaker settings. 523-0808877
The settings tab page has the audio control buttons.

You might also like