Professional Documents
Culture Documents
For safety specifics and detailed chemical behaviour of the material, the appropriate supplier’s MSDS (Material Safety Data
Sheet) should be referred to.
This standard serves to form the basis for more detailed plant specific standard operating procedures and manufacturing standards.
MATERIAL DESCRIPTION
Free flowing, colouredcoarse granular speckle, made of a combination of Sodium Chloride (≤ 55%), Sodium Sulphate (≥ 45%),
Sodium Silicate (1.0-1.5%) and Pigment (0.5%) free from foreign material.
MATERIAL CHARACTERISTICS
Refer to related material specification
STORAGE& HANDLING
Advise on storage
Bags should be kept dry and away from moisture to avoid caking.
Material Temperature
Storage Temperature: minimum 0.0ºC, maximum 50ºC. Preferably below 40ºC
Transport Information
Road/Rail (ADR/RID): Not applicable
Sea transport (OMI/IMDG) Not applicable
Air transport (OACI/IATA). Not Applicable
Line Clearance
Vacuum or low pressure hot water should be used to clean the lines and prevent airbourne dust. Ensure equipment is thoroughly
dry before re-introducing the raw material.
Stacking
Material not to be stacked more than 1 pallet high.
Shelf-life
Provided material is stored in the original packaging, in dry conditions and is not exposed to direct sunlight, this raw material has
a shelf life of 3 years from receiving. This is in line with the supplier recommendation.
To extend material beyond shelf life all RMS parameters must be retested and there must be an assessment of colour versus
standard. Shelf life extensions beyond 3 years require TMO concurrence.