Professional Documents
Culture Documents
10.6.2 Homework Problem: Designing A Wing For An RC Aircraft
10.6.2 Homework Problem: Designing A Wing For An RC Aircraft
What is the induced drag of the wing? Enter your answer in Newtons with two digits of precision in the
form X.YeP.
Determine cl (y). Speci cally, nd the maximum cl (y) and the spanwise location at which it occurs.
10.6.2 Homework Problem: Designing a wing for an RC aircraft
10.6.2 Homework Problem: Designing a wing for an RC aircraft What is the maximum cl (y)? Enter your answer with two digits of precision in the form X.YeP.
You are to design a candidate wing for a sport RC electric aircraft to the following requirements: What is the value of |2y/b| at which this maximum cl (y) occurs? Enter your answer with two digits of
precision in the form X.YeP.
density: ρ = 1.2 kg/m3
lift: L = 5.0 N
Assume that the aircraft will be designed to y such that the angle of attack of the freestream relative
to a chosen reference line is zero, that is α = 0. Determine the distribution of the geometric twist
span: b = 2.0 m
angle, αg (y) , required to achieve the desired lift distribution.
Assume that the lift distribution is elliptic and that the lift coe cient for the wing's airfoils (i.e. in a 2D
ow) is cl = 2π (α − αL =0 ) where αL =0 = −π/180 rad.
′ ′
What is αg at the wing tips (i.e. at |y| = b/2 )? Enter your answer in degrees with two digits of precision
in the form X.YeP.
Assume the wing planform is tapered with λ = c t /c r = 0.4 , with
What is cr ? Enter your answer in meters with two digits of precision in the form X.YeP.
What is largest value of αg ? Enter your answer in degrees with two digits of precision in the form X.YeP.
What is ct ? Enter your answer in meters with two digits of precision in the form X.YeP.