You are on page 1of 1

Communication with engine-ECU is not possible

The engine warning lamp does not illuminate right after the
goes out or is blinking
The engine warning lamp remains illuminating and never

The starter is impossible to operate

Starting impossible (Starter operative but no initial combustion)

Starting impossible (Long time to start)

Improper idling

The engine stalls when decelerating

Poor acceleration

A large amount of fuel consumption

Knocking, Abnormal noise

White smoke

Black smoke

Battery rundown

Overheating
ignition switch is turned the "ON" position
Trouble symptoms

Probable causes

Diagnosis connector circuit


Engine warning lamp
Engine warning lamp circuit
Starter motor
Starter motor relay
Starting system related circuit
Battery
Inhibitor switch
Engine control relay
Engine-ECU power supply circuit
Engine-ECU
Glow system
Timing chain torn
Valve clearance
Compression pressure
Common rail assembly
Suction control valve
Supply pump
Supply pump correction learning
Fuel filter clogged
Fuel line leaking or clogged
Mixing of air with fuel
Improper fuel
Engine oil
Air cleaner clogged
Electronic-controlled throttle valve
EGR system
EGR port clogged
Turbocharger
Injector
Injector identification code registration
Small injection quantity learning
Crank angle sensor
Camshaft position sensor
Barometric pressure sensor
Engine coolant temperature sensor
Manifold absolute pressure sensor
Fuel temperature sensor
Accelerator pedal position sensor
Throttle position sensor
Fuel pressure sensor
Engine cooling system
Alternator

AK503602

You might also like