Professional Documents
Culture Documents
1
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
Visited the Built Wooden Doors Factory on 17April, 2023 at Sudair City, As Built Wooden Doors Factory
complies with project requirements as per Quality Inspection and checked the order quantities as mentioned
in below table.
1. Production Process:
2
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
Hollow Chipboard:
The chipboard is the main body/part of the door.
MDF Sheets:
3
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
4
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
Bandsaws:
The below machine is used for cutting solid wood, and chipboard materials for wooden doors.
OMEC Machine:
The below OMEC machine is used to press the wooden door to remove the air voids and
fix the level of the door.
5
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
Before packing:
6
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
Packages:
7
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
Height=2140 mm Width=815mm
8
Quality Department
Factory Visit Report
BCC-RPT-GQC00-MQC-00036-01
Thichkness=45 mm
Recommendations:
a. The QC inspection to be carried out before delivery to the site and the frequency of
visit is depend on construction team order.
b. It must be well packaged before being loaded for supply to the site.
c. The Materials must offload properly with the help of machineries without causing
any damage to the materials.
d. The frequence of visiting the factory is weekly as per project requirement.
e. Checking the Raw material as quantity and quality.