Professional Documents
Culture Documents
NOTICE
Services, Wärtsilä Finland Oy
Engine section Engine type Ref. Date Issue Document No. Page
12 Cylinder head W46, 46GD WFI–S 12.2.2008 01 4612P007 1(2)
Identification The valves can be identified from the marking stamped at the end of valve
stem, see figure 3.
1. Stellit coated valves, disc diameter 160 mm.
These are used in engines that are specified for light fuel oil, marine
XXXXXX
Marking diesel oil or gas oil operation. It is also used in 46GD engines using light
fuel oil, marine diesel oil or gas oil as pilot fuel. The marking on the
valve is B0137.
Fig. 1 Fig. 2
Note! The valves B0314 and B0361 must not be used in engines with
compression ratio 16:1 (connecting rod shim s=17 mm) because of risk
for contact between the exhaust valve and piston crown.
Wärtsilä Finland Oy P.O. Box 252 (Tarhaajantie 2) Telecop. +358 10 709 1847 Tel. +358 10 709 0000 Business ID 0773744-3
Services, Vaasa FIN-65101 Vaasa, Finland Telecop. +358 10 709 1380 Registered Office: Vaasa
Wärtsilä Finland Oy P.O. Box 50 (Stålarminkatu 45) Telecop. +358 10 709 3279 Tel. +358 10 709 0000
Services, Turku FIN-20811 Turku, Finland Telecop. +358 10 709 3410
Services, Wärtsilä Finland Oy Spare Parts Notice
Issue Document No. Page
01 4612P007 2(2)
Ordering Contact your closest Wärtsilä Service Network. When ordering please
specify the engine serial number and part number 121 006 or 121 010
according to the engine specific Spare Part Catalogue.