Professional Documents
Culture Documents
according to DIN 71412 or with reference to international standards suitable for lubricating with handled lubricating
power presses or for force lubricating power presses. The connection with the coupler nozzle of the lubricating power
press is form conclusive for this reason lubrication equipments without pressures in sloping position are possible for
difficult of access lubricating places.
table of contents / program steel tempered on request non hardenend high zinc plated and passivated (standard type zinc, blue passivated); for
special reasens stainless (1.4305 or brass) possible.
1. 0. Lubricating Nipples - Hydraulic Type - DIN 71412 / 1. 1. Lubricating Nipples - Hydraulic Type
International Standards DIN 71412, straight version 180°, H1 (type A),
high zinc plated, blue passivated
1. 1. Lubricating Nipples - Hydraulic Type - DIN 71412, straight version 180°,
Order-No. (7 numbers): 1. 2. 3. 4. 5. 6. 7. pieces
H1 (type A)
1. 2. Lubricating Nipples - Hydraulic Drive Type with plain shank - DIN 71412, steel stainless zngb steel non
brass steel znbl tempered hardenend
measurement
straight version 180°, H1 A (type A) 1 2 3 1 2 1 0
SW
1. 3. Lubricating Nipples - Hydraulic Drive Type with plain shank - DIN 71412,
H1 M6 x 0,75 1 1 0 1 4000
45°, H2 A (type B) - square version
H1 M6 x 1 1 1 0 2 4000
1. 4. Lubricating Nipples - Hydraulic Drive Type with plain shank - DIN 71412,
H1 M6 x 1 SFG 1 1 9 7 4000
90°, H3 A (type C) - square version
hexagon
7
1. 5. Lubricating Nipples - Hydraulic Type - DIN 71412, angled version 45°, H1 1/4" - 28 SAE 1 1 0 3 4000 SW 7 15
H1 1/4" - 28 UNF 1 1 0 3 4000 9/32" 19/32"
H2 (type B) - square version 5,5
H1 1/4" - 28 NF 1 1 0 3 4000 7/32"
1. 6. Lubricating Nipples - Hydraulic Type - DIN 71412, angled version 90°,
H3 (type C) - square version H1 1/4" - 26 BSF 1 1 0 4 4000
1. 7. Lubricating Nipples - Hydraulic Type - DIN 71412, angled version 45°,
H1 M7 x 1 1 1 0 5 3000
H2 (type B) - hexagon version
H1 M8 x 1 1 1 0 6 3000
1. 8. Lubricating Nipples - Hydraulic Type - DIN 71412, angled version 90°,
H1 M8 x 1 SFG 1 1 9 8 3000
H3 (type C) - hexagon version
H1 M8 x 1,25 1 1 0 7 3000 hexagon
2. 0. Lubricating Nipples - Ball Type - according to DIN 3402 H1 M8 x 0,75 1 1 0 8 3000 SW 9 15
9
23/64" 19/32"
5,5
2. 1. Lubricating Nipples - Ball Type - DIN 3402, straight version 180°, K1 (type A) H1 5/16" - 24 SAE 1 1 0 9 3000 13/64"
2. 2. Lubricating Nipples - Ball Type - DIN 3402, 45°, K2 (type B) H1 5/16" - 24 NF 1 1 0 9 3000
2. 3. Lubricating Nipples - Ball Type - DIN 3402, 90°, K3 (type C) H1 5/16" - 24 UNF 1 1 0 9 3000
2. 4. Lubricating Nipples - Ball Drive Type with plain shank - DIN 3402, H1 5/16" - 22 BSF 1 1 1 0 3000
straight version 180°, K1 A
H1 M10 x 1 1 1 1 1 2000
2. 5. Lubricating Nipples - Ball Drive Type with plain shank - DIN 3402,
H1 M10 x 1 SFG 1 1 9 9 2000
45°, K2 A
hexagon
2. 6. Lubricating Nipples - Ball Drive Type with plain shank - DIN 3402, H1 M10 x 1,25 1 1 1 2 2000 SW 11 15
H1 M10 x 1,5 1 1 1 3 2000 7/16" 19/32"
90°, K3 A 5,5
13/64"
11
H1 R1/8" 1 1 1 4 2000
3. 0. Button Head Lubricating Nipples - DIN 3404 H1 3/8" - 24 SAE 1 1 1 5 2000
3. 1. Button Head Lubricating Nipples with round head H1 3/8" - 24 NF 1 1 1 5 2000
3. 2. Button Head Lubricating Nipples with hexagon head H1 3/8" - 24 UNF 1 1 1 5 2000
H1 3/8" - 27 NPT 1 1 1 6 2000
4. 0. Custom Design Lubricating Heads H1 R1/4" 1 1 1 7 1500 hexagon
4. 1. Custom Design Lubricating Heads - MKA H1 M12 x 1 1 1 1 8 1500 SW 14
9/16" 16,5
11/16"
14
order-no.:
H1 5/16"-24 NF, stainl. steel, yellow pas., non harden.
1109 3 2 0
2
1. Lubricating Nipples - Hydraulic Type JAHN JAHN 1. Lubricating Nipples - Hydraulic Type
19/32" SW 9
5,5 23/64"
7/32" H2 M6 x 1 SFG 1 5 3 5 1500 21 max.
Ø H2 M8 x 1 1 5 3 6 1500 51/64"
9
5,5
H1 A8 1 2 2 7 3000
9
11
5,5 H2 M10 x 1,5 1 5 4 0 1000 7/16"
7/32" 21 max.
H2 R1/8" 1 5 4 1 1000
13/16"
1. 3. Lubricating Nipples - Hydraulic
5,5
Drive Type with plain shank 13/64"
9
45/64" H3 M8 x 1 1 6 4 8 1500 45/64"
angled version 90°, H3 A (type C) - square version, 5,5 5,5
high zinc plated, blue passivated 13/64" H3 M8 x 1,25 1 6 4 9 1500 13/64"
H3 M8 x 1 SFG 1 6 5 0 1500
15 max. 15 max.
H3 A6 1 4 3 1 1500 square 19/32" square 19/32"
9
H3 A8 1 4 3 2 1500 SW 11 SW 11
7/16" 7/16"
H3 M10 x 1 1 6 5 1 1000
18
18
11
JAHN JAHN
order exemple: order example:
3 Lubricating Nipples H2 A8,
order-no.: 1330
steel, blue pass., steel tempered
1 1 1
Lubricating Nipples H2 M8 x 1 STT, steel, yellow pass., hardenend
order-no.: 1538 1 2 1
4
1. Lubricating Nipples - Hydraulic Type JAHN JAHN 1. Lubricating Nipples - Hydraulic Type
SW hexagon SW
SW 9
H2 M6 x 0,75 1 7 5 4 1500 23/64" H3 M6 x 0,75 1 8 7 9 1500 18
23,5 max. 45/64" hexagon
H2 M6 x 1 1 7 5 5 1500 15/16" H3 M6 x 1 1 8 8 0 1500 5,5 SW 9
13/64"
H2 M6 x 1 SFG 1 7 5 6 1500 5,5 H3 M6 x 1 SFG 1 8 8 1 1500 23/64"
9
9
H2 M8 x 1 1 7 6 0 1500 H3 M8 x 1 1 8 8 5 1500
H2 M8 x 1,25 1 7 6 1 1500 H3 M8 x 1,25 1 8 8 6 1500
H2 M8 x 1 SFG 1 7 6 2 1500 model U (Universal) H3 M8 x 1 SFG 1 8 8 7 1500 model U (Universal)
H2 5/16" - 24 SAE 1 7 6 3 1500 H3 5/16" - 24 SAE 1 8 8 8 1500
H2 5/16" - 24 NF 1 7 6 3 1500 45° H3 5/16" - 24 NF 1 8 8 8 1500
H2 5/16" - 24 UNF 1 7 6 3 1500 11,5 max. H3 5/16" - 24 UNF 1 8 8 8 1500
29/64" 14 max.
35/64"
H2 5/16" - 22 BSF 1 7 6 4 1500 H3 5/16" - 22 BSF 1 8 8 9 1500
hexagon
SW 11
7/16"
20
SW 25,5 max. SW 51/64"
hexagon
5,5 SW 11
H2 M10 x 1 1 7 6 5 1000 5,5
H3 M10 x 1 1 8 9 1 1000 13/64"
7/16"
H2 M10 x 1,25 1 7 6 6 1000 13/64" H3 M10 x 1,25 1 8 9 2 1000
H2 M10 x 1,5 1 7 6 7 1000 model K (ball) H3 M10 x 1,5 1 8 9 3 1000 model K (ball)
H2 R1/8" 1 7 6 8 1000 H3 R1/8" 1 8 9 4 1000
11
11
H2 3/8" - 24 SAE 1 7 6 9 1000 H3 3/8" - 24 SAE 1 8 9 5 1000
H2 3/8" - 24 NF 1 7 6 9 1000 H3 3/8" - 24 NF 1 8 9 5 1000
H2 3/8" - 24 UNF 1 7 6 9 1000 H3 3/8" - 24 UNF 1 8 9 5 1000
H2 3/8" - 20 BSF 1 7 7 0 1000 H3 3/8" - 20 BSF 1 8 9 6 1000
model U (Universal)
model U (Universal)
JAHN JAHN
order example: Lubricating Nipples order example: Lubricating Nipples
5 order-no.:
H2 5/16" - 24 NF, steel, blue pass., non hardenend, model Universal
1763 1 1 0 U
H3 M8 x1,25; steel, yellow plated, case hardenend, model ball
order-no.: 1 8 8 6 1 2 1 K
6
2. Lubricating Nipples - Ball Type JAHN JAHN 2. Lubricating Nipples - Ball Type
according to DIN 3402, made of steel, high zinc plated and blue passivated; for special requirements made of
stainless steel or brass possible, non hardenend
hexagon
SW 7 Ø8
14
9/32" 2. 4. Lubricating Nipples - Ball 5/16"
14
2. 1. Lubricating Nipples - Ball Type 5,5 9/16" Drive Type with plain shank 5,5 9/16"
13/64"
straight version 180°; K1 (type A) 13/64"
DIN 3402 hexagon straight version 180°, K1 A (type A)
high zinc plated, blue passivated SW 9
23/64" Ø 10
Order-No. (7 numbers): 1. 2. 3. 4. 5. 6. 7. pieces 14 25/64"
1. 2. 3. 4. 5. 6. 7. pieces 14
steel stainless zngb steel non
5,5 9/16" Order-No. (7 numbers): 9/16"
brass steel znbl tempered hardenend 13/64" 5,5
measurement hexagon steel stainless zngb steel non 13/64"
SW 11 brass steel znbl tempered hardenend
SW 1 2 3 1 2 1 0 measurement
7/16"
K1 M6 x 1 2 1 0 1 4000 14 1 2 3 1 2 1 0
7
9/16"
Ø Ø 12
5,5
K1 A6 2 4 1 9 4000 15/32"
8
K1 M8 x 1 2 1 0 2 3000 13/64" 14
9
9/16"
K1 M8 x 1,25 2 1 0 3 3000 5,5
hexagon
13/64"
SW 14 Ø
K1 M10 x 1 2 1 0 4 2000
11
9/16"
10
K1 A8 2 4 2 0 3000
K1 R1/8" 2 1 0 5 2000 16
6,5 41/64"
45°
14
12
9 K1 A10 2 4 2 1 2000 square
23/64" SW 9
square 23/64"
SW 9 19
23/64" 3/4"
2. 2. Lubricating Nipples - Ball Type 19 5,5
3/4" 13/64"
DIN 3402, 45°, K2 (type B) 5,5
13/64"
2. 5. Lubricating Nipples - Ball
K2 M6 x 1 2 2 0 7 1500 45°
45° Drive Type with plain shank 9,5
9,5 3/8"
K2 M8 x 1 2 2 0 8 1500
9
3/8" square
square DIN 3402, 45°, K2 A SW 11
K2 M8 x 1,25 2 2 0 9 1500 SW 11 7/16"
7/16" 19
K2 M10 x 1 2 2 1 0 1000
19 K2 A6 2 5 2 2 1500 3/4"
11
9
5,5
5,5 K2 A8 2 5 2 3 1500 13/64"
K2 1/8" - 28 BSP 2 2 1 2 1000 13/64"
13
11
K2 A10 2 5 2 4 1000 square 33/64"
13
SW 9
square 33/64"
23/64"
SW 9
2. 3. Lubricating Nipples - Ball Type 23/64" 2. 6. Lubricating Nippels - Ball Drive Type 18
45/64"
DIN 3402, 90°, K3 (type C)
18 with plain shank 5,5
45/64" 13/64"
5,5 DIN 3402, 90°, K3 A
13/64"
K3 M6 x 1 2 3 1 3 1500 14
14 K3 A6 2 6 2 5 1500 square 35/64"
K3 M8 x 1 2 3 1 4 1500
9
square 35/64" SW 11
SW 11 K3 A8 2 6 2 6 1500
K3 M8 x 1,25 2 3 1 5 1500 7/16"
7/16"
18
K3 M10 x 1 2 3 1 6 1000 18 45/64"
11
JAHN JAHN
order example: order example:
7 Ball Lubricating Nipples K1 R1/8", steel, blue pass., non hardenend
order-no.: 2105 1 1 0
Ball Lubricating Nipples K2 A8,
order-no.: 2523
steel,
1
blue pass., non harden.
1 0
8
3. Button Head Lubricating Nipples JAHN JAHN 4. Custom Design Lubricating Heads
according to DIN 3404 or with reference with similar performance, suitable for lubrication points needing a quanitity
of lubricant or for lubricant volume.
straight version 180°; type M1 (head diameter 16 mm); type M4 (head diameter 10 mm);
some types are available in stainless steel or brass, high zinc plated, as a rule blue passivated. 4. 1. Custom Design Lubricating Head MKA,
Custom Design Lubricating Nipples according to drawing
3. 1. Button Head Lubricating Nipples with Round Head,
suitable for the strong use of conveyor systems
head diameter 16 mm; (10 mm) and other big implements (coalmines etc.)
according to DIN 3404; cylindrical thread
17
M1 M16 x 1,5 3 1 0 6 1500 6 (26)
MKA M16 x 1,5 4 1 0 3 1500
M1 R1/8" (G 1/8") 3 1 0 7 1500 8
(26 long) (9)
M1 R1/4" (G 1/4") 3 1 0 8 1500 Ø 10
hexagon MKA M16 x 1,5 4 1 0 4 1500
SW 11 (26 long)
M4 M6 x 1 3 1 0 9 2000 without ball and spring
14
11
M4 M8 x 1 3 1 1 0 2000
5,5
M4 M10 x 1 3 1 1 1 2000
Notes
3. 2. Button Head Lubricating Nipples with Hexagon Head
similar to DIN 3404 with cylindrical thread and hexagon head 15 mm ,
straight version 180°; for special use
SW
T1B M6 x1 3 2 1 2 1500
T1B 1/4" - 28 UNF 3 2 1 3 1500
T1B 1/4" - 28 SAE 3 2 1 4 1500
T1B 1/4" - 28 NF 3 2 1 5 1500
T1B M8 x 1 3 2 1 6 1500
T1B M8 x 1,25 3 2 1 7 1500
T1B M10 x 1 3 2 1 8 1500 hexagon
15
Ø 16,5
T1B M10 x 1,5 3 2 1 9 1500 SW 15
JAHN JAHN
order example: Button Head Lubricating Nipples, hexagon order example:
9 order-no.:
T1B M10 x 1,5; steel, blue pass., case harden.
3219 1 1 1
Lubricating Head (26 long) MKA M16 x1.5, steel, blue pas., non hard.
order-no.: 4103 1 1 0
10
JAHN – SCHMIERNIPPEL
On the basis of the experiences of tens of years as producer of
grease nipples according to DIN or international standards we can
offer a large range of kinds of grease nipples of our wide and
steadily increasing assortment to our customers.
JAHN - grease nipples have short times of delivery and prices accor-
ding to the market.
JAHN - grease nipples are international, they are used all over the
world.
JAHN GmbH
Cold Forming and Machining Technique
Triftstraße 1a
D99897 Tambach–Dietharz Phone (+49 3 62 52) 3 60 74
Germany Fax (+49 3 62 52) 3 20 56