Professional Documents
Culture Documents
SHOP
LEARN
HELP
COMPARE
CAD CREATE ACCOUNT
STRAINS
CONTACT
SERVICES
ABOUT
COMPARE STRAINS
SHOP
SERVICES CREATE ACCOUNT
CONTACT
5 OFF FLAVOURS
CAUSED BY BEER
YEAST (AND HOW
TO PREVENT
THEM)
AS A BREWER, THE LAST THING
YOU WANT TO HEAR IS A
COMPLAINT ABOUT OFF-
FLAVOURS IN YOUR BEER.
https://escarpmentlabs.com/blogs/resources/5-off-flavours-beer-yeast Page 1 sur 11
5 Off Flavours Caused By Beer Yeast (And How To Prevent Them) – Escarpment Labs 12/05/2023 14:41
We all strive to create the perfect pint. However, sometimes things don't go as planned, and
we end up with off-flavours that can ruin our hard work. While there are many factors
that can contribute to these flavours, yeast management is often a culprit.
In this article, we will discuss the five most common off-flavours caused by yeast in beer:
1. Diacetyl
2. Acetaldehyde
3. Sulfur
4. Phenols
5. Fusel alcohols
We'll also provide suggestions on how to prevent and fix these issues.
To learn more about any of these, we recommend digging into our Knowledge Base, Blog,
and YouTube channel!
Diacetyl
To prevent diacetyl, it's important to ensure that your yeast is healthy and has enough
nutrients. Consider using a yeast nutrient or oxygenating your wort to promote healthy
yeast growth. Additionally, it's crucial to monitor your fermentation temperature and avoid
any sudden drops or fluctuations. If you do end up with diacetyl in your beer, a common
solution is to perform a diacetyl rest. This involves raising the temperature of the beer
slightly towards the end of fermentation, allowing the yeast to consume any remaining
diacetyl.
Note that different people have wildly different sensitivities to diacetyl. A forced diacetyl
test can help you if you are not sensitive to diacetyl.
For more information on diacetyl including troubleshooting diacetyl in beer, check out our
Knowledge Base article on diacetyl as well as our YouTube video on diacetyl.
Acetaldehyde
Acetaldehyde is a green apple-like flavour that can be caused by yeast. Like diacetyl,
acetaldehyde is a byproduct of yeast metabolism during fermentation. However, in this
case, acetaldehyde is created as an intermediate step in the conversion of sugars to alcohol.
Normally, the yeast will consume the acetaldehyde quickly, but if there is an insufficient
amount of yeast or the fermentation temperature is too low, acetaldehyde can build up in
the beer.
To prevent acetaldehyde, ensure that your yeast is healthy and has enough nutrients. Also,
ensure that the fermentation temperature is appropriate for your yeast strain and that
there is sufficient oxygenation. If you do end up with acetaldehyde in your beer, the best
solution is to allow the beer to age longer. The yeast will eventually consume the
acetaldehyde, but it may take a few extra days or weeks.
It is known that nutrient supplementation, especially addition of zinc, helps with reduction
of acetaldehyde in beer. Zinc plays a key role in yeast metabolism because it is a cofactor in
key fermentation enzymes. In particular, the alcohol dehydrogenase enzymes help convert
acetaldehyde to alcohol require zinc as a cofactor.
Sulfur
Sulfur is a common off-flavour in beer and can be caused by several different factors,
including yeast. The yeast produces sulfur compounds during fermentation as a byproduct
of metabolism. These compounds can give beer a distinct aroma, often described as rotten
eggs or burnt matches. While small amounts of sulfur can be desirable in some beer styles,
excessive amounts can be unpleasant. Remember the early days of hard seltzers, and all the
sulfury seltzers on the market? This was likely due to a lack of nutrients for the yeast.
To prevent sulfur off-flavours, ensure that your yeast is healthy and has enough nutrients.
Additionally, ensure that your fermentation temperature is appropriate for your yeast
strain and that there is sufficient oxygenation. If you do end up with sulfur off-flavours in
your beer, there are a few different options. One solution is to allow the beer to age longer,
as the yeast will eventually consume the sulfur compounds or they may otherwise flash
off. Another solution is to use a yeast strain that produces fewer sulfur compounds. A third
option is to use an oxidizing agent such as a small piece of copper pipe during the transfer of
the beer.
A key way to reduce the risk of sulfur is to match the FAN and nutrients in your wort to
your yeast. You can use our FAN Utilization data here as well as our guide to
troubleshooting sulfur in order to optimize this for each yeast strain you use.
Phenols
Phenols are a group of compounds that can give beer a range of off-flavours, including
medicinal, band-aid, and clove-like flavours. These off-flavours are often caused by yeast
and are produced during fermentation. Phenols can be produced by yeast when they are
exposed to chlorine (in water), and also in response to the availability of phenol precursors
from malt or other ingredients.
To prevent phenolic off-flavours, ensure that your yeast is healthy and has enough
nutrients. Additionally, ensure that you are not exposing your yeast to chlorine or other
halogens, as these can cause phenolic off-flavours. Finally, ensure that you are fermenting
your beer at an appropriate temperature for your yeast strain. If you do end up with
undesirable phenolic off-flavours in your beer, it can be sometimes addressed through aging
or through masking by other ingredients such as fruit.
Check out our Knowledge Base article on malt precursors to phenolic compounds for more
information.
Fusel Alcohols
Fusel alcohols are a group of compounds that can give beer a range of off-flavours,
including hot and solvent-like flavours. These off-flavours are often caused by yeast and
are produced during fermentation. Fusel alcohols can be produced by yeast when they are
exposed to too much heat, when they have access to too much nutrient (FAN), or when they
are stressed.
To prevent fusel alcohol off-flavours, ensure that your yeast is healthy and has enough (but
not excessive) nutrients. Additionally, ensure that you are fermenting your beer at an
appropriate temperature for your yeast strain and that you are not exposing your yeast to
too much heat. If you do end up with fusel alcohol off-flavours in your beer, the best
solution is to allow the beer to age longer. However, depending on the severity of the off-
flavour, it may be best to dump the batch and start again. If you consistently get fusels from
a certain recipe, we recommend reducing the FAN content of the wort by substituting some
of the malt for sugar (sucrose or dextrose).
Conclusion
Yeast is a crucial component in beer production, but it can also be a cause of off-flavours if
not managed properly. By ensuring that your yeast is healthy and has enough nutrients,
monitoring your fermentation temperature, and avoiding exposure to certain compounds,
you can prevent many of the common off-flavours caused by yeast. However, if you do end
up with an off-flavour in your beer, don't panic. With a bit of patience and some careful
attention to your brewing process, you can often fix the issue and produce a delicious, high-
quality beer.
Do you want to learn more about beer fermentation? Escarpment Labs prioritizes creating
and sharing our knowledge. Check out these resources:
flavours.
We encourage the use of Yeast Lightning Nutrient, which is specifically formulated for the
unique nutrient needs of beer yeasts. Yeast Lightning Nutrient will help reduce the risk of
off-flavours by ensuring a complete fermentation and healthy yeast.
LEAVE A
COMMENT
Name
Content
P OST C OMMEN T
MORE READING
TOP PICKS
https://escarpmentlabs.com/blogs/resources/5-off-flavours-beer-yeast Page 8 sur 11
TOP PICKS
5 Off Flavours Caused By Beer Yeast (And How To Prevent Them) – Escarpment Labs 12/05/2023 14:41
BEER IS IN
THE DETAILS.
GET THEM
HERE.
SEE OUR FAQS