Professional Documents
Culture Documents
Dust Collector Assembly
Dust Collector Assembly
Drain line in
mast pedestal
RC Module inside
Hydraulic Cabinet
RC Controller located inside Hydraulic Cabinet
Hydraulic
Cabinet
You have it already mounted so we will not be going into it. Consider removing the hose support if hose doesn’t reach the deck
dust duct
Locations on rig - Drain line Hyd Motor
Drain manifold Side A
Connect the A port
side of the Hyd
Motor to the drain View from the
manifold. The route middle of the rig
of the hose is looking to the rear
highlighted in yellow side of the rig
BI00044493-D SH2 D7
BI00044493-D SH1 Q9
Locations on rig - Pressure line Hyd Motor
Side V
Connect the port 4
from the dust
collector valve to the View from the
V port side of the middle of the rig
hyd. Motor. looking to the rear
side of the rig
Dust collector
valve
Locations on Schematics - Pressure line
D13 line should be
connect to drain line
now. You need to
disconnect it form drain
manifold and plug it
into the V hyd motor
port side
BG01496487-F SH4 D9