Professional Documents
Culture Documents
User Manual
1
Content
1.3 Installation
1.4 Specification
2.2 Advantages
Chapter 3 Treatment
1
Chapter 1 Machine Description
Front view
Handle bracket
Start-Stop button
2
Back view
Broker
Water outlet
3
1.2 Accessories list
Name Quantit Unit Name Quantity Unit
y
Pipe 1 piece Bracket 1 piece
Treatment head 3 piece Bracket hook 2 piece
Power cable 1 piece Drain tube &r 1 piece
ubber ring
Pipe
Bracket
Treatment head
Bracket hook
4
Instructions for use of rubber ring:Replace the rubber ring if
Adapter Instruction
Name Image Function Description
5
808 Adaptor With 808 diode laser hair
Head removal macine treatment
(Optional)
1.3 Installation
Before opening the instrument, check that the installation environment
location. The system should be installed away from the hot air, and with other
objects have a certain distance.
Take out the machine parts and place them indoors for 2 hours to
perform the following operations.
Step 1: As shown in the figure, insert the bracket into the fixed point
and install the clip;
6
Step 3: Fix the air outlet pipe and install the treatment head
7
1.4 Specification
Refrigerants R404A
8
Chapter 2 System Description
2.2 Advantages
(1) HIGHLY Compressor Imported from Japan and DUPONT environmen
tally friendly refrigerant R134a;
(2) Ultra-low temperature refrigeration -30 degrees
(3) Applicable to foreign machines (same size as ZIMMER and foton)
(4) 2.5mm length and 200g weight of the air pipe are more flexible;
(5) 5.1L large capacity bellows, sustainable ultra-low temperature
treatment
(6) Dedicated bracket for easy operation with orientation
(7) 2.4-inch true color touch screen, visual human-machine interface
(8) 700L/min super strong wind speed, 8 gears adjustable, suitable for
various treatments
(9) The whole machine is equipped with silencer to reduce treatment
noise and make treatment more comfortable
(10) Super strong platform, placed with a variety of instruments for use.
e is
not adjustable
10
Chapter 3 Treatment
808 laser, IPL, 980 laser, CO2 laser, radio frequency, Pico
laser, etc. It can be used to cool the skin to avoid burns and
reduce pain.
1. Before treatment, air cooler can be used to blow the treatment area
for 2 minutes to cool the treatment area
2. For treatment with photoelectric equipment, the air outlet should be
aimed at the light emitting part
3. If there is no matching handle with the photoelectric device, when per
forming facial treatment, the air outlet needs to be inclined along the dir
ection of the patient's forehead to chin for treatment, so that the patient
is more comfortable.
Operation as shown
For example, hold the blower during operation, follow the operation
direaction of the treatment head, and blow cold air while doing.
If the operation uses the adapter head, the cold wind will blow out from
the treatment head.
11
Or you can use the bracket when you do treatment.
starting;
(2) The interface only displays the set temperature, not the
actual temperature;
(4) Observe the water level before using the machine. If the
12