Professional Documents
Culture Documents
STREUMASTER binding agent spreaders are suitable both for spreading large quantities
of binding agents during soil stabilization and for spreading small quantities of binding
agents with maximum precision during cold recycling.
The TC series of binding agent spreaders are available as single-axle and tandem trailers
and can be towed by tractors with an engine output of either approx. 130 kW / 180 PS
or approx. 180 KW / 250 PS (for single-axle or tandem trailers, respectively).
The MC series of mobile binding agent spreaders are mounted on a carrier vehicle and
are therefore perfect for use in difficult off-road conditions.
With a spreading width of 2,360 mm, the models in the TC and MC series are capable of
spreading quantities of up to 60 l / m2.
In combination with products from the WIRTGEN GROUP, STREUMASTER binding agent
spreaders cover the complete cycle in road construction and earthworks.
Highlights of the Binding Agent
04
Spreaders at a Glance
05
6 |
5 |
2 |
1 |
3 |
4 |
Spreading Highlights
1 |
2 |
3 + 4 | The six
self-cleaning filters
can be manually
serviced quickly
and easily.
3 |
4 |
Highly Efficient
Material Conveying
10
11
OPTIMUM DISTRIBUTION OF THE BINDING AGENT The new chain rotation eliminates the need for an addi-
Two distribution augers that rotate in opposite direc- tional space beneath the container floor. This means that
tions are located above the filling chute, ensuring that the machine’s center of gravity is located further down,
the binding agent is distributed evenly and efficiently which makes the machine even more stable.
across the three cellular wheels. While the lower trans-
verse auger distributes the material over the full width SELF-TENSIONING CHAIN CONVEYOR ELIMINATES
of the container the upper auger transports excess ma- THE NEED TO RE-TENSION THE CHAIN
terial back to the center. Because they rotate in opposite The weight of the chain conveyor when returning auto-
directions, the augers create a cycle that results in a matically tensions the conveyor when moving forward.
constant fill level above the cellular wheels. This eliminates the need to manually re-tension the
chain.
SENSOR-CONTROLLED CHAIN CONVEYOR
The new generation of machines features an optimized
chain guide that allows the chain to only partially run
through the material, reducing power requirements and
as a result, lowering fuel consumption.
1 |
1 | The auger
distributes binding 2 |
agent across the
entire width of the
container to fill
all of the dosing
sluices evenly.
2 | Thanks to the
optimized chain
guide, the binding
agent is conveyed
to the distribution
augers in a much
more energy-effi-
cient manner.
3 | The material
enters the dosing
sluices via the filling
chute.
3 |
Maximum Spreading
Accuracy
12
13
SELF-CLEANING DOSING SLUICE ing unit with a spread rate of up to 42 l / m2,
The spreading unit consists of dosing sluices STREUMASTER offers two other optional
in a cellular wheel design. A special housing spreading units. While the low-volume spread-
with pressure and release zones as well as ing unit with a spread rate of up to 10 l / m2 is
flexible cells ensure that the dosing sluices are particularly recommended for cold recycling
self-cleaning. applications, the high-performance spread-
ing unit with a spread rate of up to 60 l / m2
SEPARATELY CONTROLLABLE PARTIAL is used primarily in soil stabilization. All three
SPREADING WIDTHS spreading units operate based on the volu-
The binding agent can be spread across metric dosing principle.
three different partial widths – in addition, the
spread rate of each partial width can be indi- FULLY AUTOMATIC BINDING AGENT
vidually adjusted (optional). This is useful, for METERING
example, when slightly more binding agent is The fully automatic binding agent meter-
needed on the outer areas than on the inner ing system ensures that the binding agent
ones. is discharged precisely, irrespective of the
machine’s travel speed. In combination with
UNIVERSAL, LOW-VOLUME, OR HIGH- the Weightronic electronic weighing device, it
PERFORMANCE SPREADING UNITS is possible to simultaneously determine both
1 | Spreading the
AVAILABLE the distance traveled and the area covered
binding agent via
partial spreading Different spreading units can be selected with binding agent. In this context, the spread
widths virtually for different applications and spread rates in rate is controlled continuously and fully auto-
eliminates the risk
of overlapping the soil stabilizing or cold recycling. In addition matically.
material. to the standard-equipped universal spread-
1 |
2 |
3 |
4 |
2 | 3 |
4 |
5 |
Pressure zone
Release zone
Maximum Spreading
Accuracy
14
15
ELECTRONIC WEIGHING DEVICE INTELLIGENT SPEED MEASUREMENT
The Weightronic electronic weighing device The machine’s exact speed is measured by a
continuously measures the container’s fill radar unit mounted on the vehicle. The dis-
weight and the quantity of binding agent tance can also be recorded by a wheel sensor.
discharged. The binding agent container This guarantees that the machine’s speed can
is mounted on four load cells that take the be measured with sufficient accuracy at all
measurements. The Weightronic system times under all site conditions. This makes it
continuously compares the actual and target possible to control the binding agent spread
values during spreading operation. If the two rate independent of the machine’s travel
values differ, the spread rate is adjusted via speed.
the correction value.
1 | Diagram show-
ing the most im-
portant Weightronic
components.
1 |
1 |
6 |
4 |
2 |
3 |
2 | The current
measurements are 2 | 3 |
displayed to the
machine operator
on the control
panel.
3 | The machine’s
speed is measured
by the radar unit.
4 | Weightronic
processes the
values measured by
the load cells.
4 |
5 |
7 |
8 |
16
17
Drive System
Highlights
FULL SPREADING SPEED AHEAD
Thanks to a number of different powerful and flexible drive options, S
TREUMASTER
binding agent spreaders are able to handle spreading jobs under even the most
difficult conditions with the help of the carrier and towing vehicles.
Flexible Drive System
POWER BEYOND HYDRAULIC SYSTEM OPTIONAL DRIVE VIA WIDE-ANGLE CARDAN SHAFT
18 Power Beyond uses the Load Sensing hydraulic system FOR A CLOSED ON-BOARD HYDRAULIC SYSTEM
19
of the towing vehicle and stands out due to its low An available option for the TC series is the still wide-
acquisition costs and low maintenance. This system also ly-used drive solution via the towing vehicle’s power
eliminates the need for an additional on-board hydrau- take-off shaft using a wide-angle cardan shaft. This of-
lic system. The new STREUMASTER TC binding agent fers maximum flexibility in the event that the customer’s
spreaders are powered via the Power Beyond system tractors are not yet equipped with the Power Beyond
standard. system or cannot supply the required oil quantity of
140 l / min.
1 |
1 | The TC series can
2 | easily be powered
by the towing vehi-
cle via the wide-an-
gle cardan shaft.
3 |
20
21
Operating
Highlights
COMPLETE CONTROL FROM THE OPERATOR’S CABIN
The new control panel unites all of the operating elements in a single unit. The individual
settings and display options can be selected quickly and easily. The binding agent spreader
can be conveniently monitored and controlled from the operator’s cabin via the control panel.
Innovative and Multifunctional
Operating Concept
22
23
EASY-TO-OPERATE CONTROL PANEL WITH INTUITIVE CONTAINER FILL LEVEL MONITORING
USER INTERFACE Sensors indicate whether the container is “almost full”
Thanks to the newly designed control panel, the oper- or “full” via an acoustic signal. These makes it easy to
ator always has an eye on all of the spreader’s options monitor the fill level. In conjunction with Weightronic, a
and settings. Individual operating values and function weight display on the back of the container is optionally
keys can be created via the user interface. The termi- available. This display makes it possible to read and
nal acts as a monitor for the optional camera / moni- check the weight of the binding agent in the container
tor system via split-screen. The new control panel for from the outside at any time during the filling process.
monitoring and controlling STREUMASTER binding
agent spreaders is equipped with a large 12-inch color
display.
1 |
1 | The optimal
positioning of the 2 |
control elements
makes the machine
easy to operate.
3 |
24
25
Telematics Highlights
Diagnostic and
Telemetry Systems
26
27
STREUMASTER binding agent spreaders support ADVANTAGES WITH WITOS FLEETVIEW:
the WIRTGEN GROUP’s intelligent WITOS FleetView > Fleet management using the WITOS FleetView
telematics system. Thanks to the system-supported telematics system
preparation, transmission, visualization, and evaluation > Increased operational reliability of the machine
of machine and position data, fleet and service man- > Rapid, accurate diagnostics via the WIDIAG service
agement during day-to-day operations becomes more diagnostics system
efficient and your overview of the machine fleet being > Internally developed, continuously optimized soft-
managed is improved. In addition, the WIDIAG service ware from the WIRTGEN GROUP
and diagnostics system enables fast diagnostics and
troubleshooting.
1 |
2 |
available
not available
3 |
1 | Always keep
tabs on your fleet
with the WITOS
FleetView telemat-
ics solution.
2 | Overview of
WITOS FleetView
availability.
Container
Conveyor Chain
Hydraulic System
Weights
Tires
Transport dimensions (L x W x H) *6 7,300 x 2,790 x 3,240 mm 8,800 x 2,890 x 3,460 mm 8,800 x 2,890 x 3,760 mm
Tractor Requirements
Tongue weight for all TC models with commercial license is 1 ton (note the permissible gross weight).
Dimensions
SW 112 TC
Optional BigBag
loading hatch
Top hitch
Bottom hitch
3,300
3,240
2,360 2,120
920 – 1,220
550 – 850
2,790 7,300
Optional BigBag
loading hatch
Top hitch
Bottom hitch
2,820
2,770
1,500
2,790
Dimensions in mm
Dimensions
SW 218 TC | SW 222 TC
30
31
SW 218 TC / SW 222 TC Binding Agent Spreader
Optional BigBag
2,350 loading hatch
Optional
add-on engine
B
500 – 800
2,360 1,860 1,580
2,890 8,790
A B
SW 218 TC 3,460 3,510
SW 222 TC 3,760 3,820
Dimensions in mm
SW 218 TC / SW 222 TC Binding Agent Spreader (Machine Transport)
Optional BigBag
2,350 loading hatch
Optional
add-on engine
D
1,500
2,890
C D
SW 218 TC 2,960 3,010
SW 222 TC 3,260 3,310
Dimensions in mm
Standard Equipment
SW 112 TC | SW 218 TC | SW 222 TC
32
33
Container / Chassis
Pneumatic high-speed filling device (R4” in size) that enables filling from both sides with
a connection coupling, a stone sieve and a sampling valve
Ventilation pipe and a pressure relief valve integrated into the container
Sensor-controlled chain conveyor made of drop-forged chain links and transport strips,
900 mm wide conveyor tunnel, OptiPower chain drive system with automatic load control
Two transverse augers used to transfer the binder to the cellular wheels
Signal tone indicates the container filling level (“almost full” and “full”)
Innovative machine control system for monitoring and controlling the binding agent
spreader. It enables the pre-selected spreading quantity (in kg / m²) to be spread with high
accuracy, regardless of the travel speed. The binding agent spreader is operated using a
tractor’s Isobus operating terminal. The spreader is delivered without the operating terminal
(optionally available).
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
SW 112 TC SW 218 TC SW 222 TC
Spreading Unit
Miscellaneous
Standard warranty
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
Optional Equipment
SW 112 TC | SW 218 TC | SW 222 TC
34
35
Container / Chassis
Operating terminal
Auxiliary diesel engine 55 kW – exhaust emissions category EU Stage 5 / US EPA Tier 4f
Spreading Unit
Drive Adapters
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
SW 112 TC SW 218 TC SW 222 TC
Miscellaneous
Compressor HK450
WITOS FleetView – professional telematics solution for machine operation and service
optimization
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
Technical Specifications
SW 212 MC | SW 318 MC | SW 418 MC | SW 422 MC
36
37
Container
Conveyor Chain
Hydraulic System
Weights
Truck requirements
3,220*
3,340*
2,360 1,870 4,500* 1,490*
1,110*
1,050*
2,460 2,140*
2,370*
8,370*
3,730*
3,460*
1,100*
2,460 2,060*
2,260
8,760*
Dimensions in mm
Dimensions
SW 418 MC | SW 422 MC
38
39
SW 418 MC / SW 422 MC Binding Agent Spreader
3,370*
B*
A*
1,100*
2,460 2,030*
2,210
9,880*
A B
SW 418 MC 3,450 * 3,700 *
Dimensions in mm
Dimensions
SW 212 MC | SW 318 MC | SW 418 MC | SW 422 MC
SW 212 MC / SW 318 MC / SW 418 MC / SW 422 MC Binding Agent Spreader with Mounted Spreading Unit (Machine Transport)
2,350
2,200 A 450
Optional BigBag
loading hatch
C
Support frame
2,460
A B C
SW 212 MC 5,560 2,820 2,875
SW 318 MC 5,760 3,210 3,265
SW 418 MC 6,760 2,960 3,015
SW 422 MC 6,760 3,210 3,265
SW 212 MC / SW 318 MC / SW 418 MC / SW 422 MC Binding Agent Spreader without Mounted Spreading Unit (Machine Transport)
(can be loaded into a 40-foot high-cube shipping container)
2,350
2,200 A 450
Optional BigBag
loading hatch
C
Support frame
2,500 D
A B C D
SW 212 MC 5,200 2,070 2,125 6,420
SW 318 MC 5,700 2,460 2,510 6,920
SW 418 MC 6,700 2,210 2,265 7,920
SW 422 MC 6,700 2,460 2,510 7,920
Dimensions in mm
Standard Equipment
SW 212 MC | SW 318 MC | SW 418 MC | SW 422 MC
40
41
Container / Chassis
Pneumatic high-speed filling device (R4” in size) that enables filling from
both sides with a connection coupling, a stone sieve and a sampling valve
Ventilation pipe and a pressure relief valve integrated into the container
Two transverse augers used to transfer the binder to the cellular wheels
Signal tone indicates the container filling level (“almost full” and “full”)
Design without truck parameter setting for the truck’s power take-off
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
SW 212 MC SW 318 MC SW 418 MC SW 422 MC
Spreading Unit
Miscellaneous
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
Optional Equipment
SW 212 MC | SW 318 MC | SW 418 MC | SW 422 MC
42
43
Container / Chassis
Spreading Unit
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
SW 212 MC SW 318 MC SW 418 MC SW 422 MC
Miscellaneous
Compressor HK450
Hydraulic connections
= Standard equipment
= Standard equipment, can be replaced with optional equipment if desired
= Optional equipment
WIRTGEN GmbH
Reinhard-Wirtgen-Str. 2 · 53578 Windhagen · Germany
Phone: +49-264-5131-0 · Fax: +49-264-5131-392
Made by STREUMASTER Maschinenbau GmbH Internet: www.wirtgen.de · E-mail: info@wirtgen.de
All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications.
Performance data dependant upon operational conditions. © WIRTGEN GmbH 2020. Printed in Germany. No. 2894408 EN-08/20 – V2 (09/20)