Professional Documents
Culture Documents
TLE-SMAW
SECOND GRADING EXAMINATION
_____2. Which of the following method of striking an arc is done by scratching the electrode across
work?
A. Scratching B. Lighting C. Tapping D. Matching
_____3. Which of the following method of striking an arc has the striking end to about 15 mm above
the start position on the plate surface? A. Scratching B. Tapping
C. Lighting D. Matching
_____4. Which of the following method of striking an arc has the striking end to about 15 mm above
the start position on the plate surface? A. Matching B. Tapping
C. Lighting D. Scratching
_____5. Which of the following method of striking an arc is similar to striking like a match?
A. Matching B. Tapping C. Lighting D. Scratching
_____6. What is the only supply to be consumed in striking an arc activity?
A. Mild steel plate B. Apron C. Electrode D. Gloves
_____7. Which part of electrode to be clamped by the electrode holder?
A. Bare bottom B. Bare left C. Bare edge D. Bare end
_____8. After preparing the tools, equipment and materials needed in striking an arc activity, what
shall we do next?
A. Set up the welding machine. C. Clamp the electrode.
B. Start welding. D. Wear leather jacket.
_____9. What shall we do when the sparks appears in Tapping method?
A. Withdraw the electrode quickly. C. Replace the electrode immediately.
B. Withdraw the electrode holder. D. Replace the work piece quickly.
_____10. What is the measure of the arc length used in striking an arc?
A. Equal to electrode diameter. C. Equal to the width of the base metal.
B. Equal to length of the base metal. D. Equal to the electrode radius.
_____11. Before setting up the welding machine, what should be done first?
A. Clamp the electrode. C. Star welding.
B. Prepare the tools, equipment and materials needed. D. Wear gloves and
apron.
_____12. What shall we connect to the primary windings terminal?
A. Power cables B. Electrode C. Return Clamp D. Welding cables
_____13. How to ensure correct installation of the welding machine?
A. Attach the electrode in the holder. C. Connect the cables to the machine.
B. Follow the steps in setting-up the equipment. D. Read the welding machine manual.
_____14. How can you reduce the risk of fumes in SMAW welding?
A. Increasing ventilation in the workspace B. Using a fume extractor C. Using a less toxic
welding wire D. All of the above
_____15. What are the symptoms of inhaling too much welding fumes?
_____20. What is provided by the manufacturer to guide you in installing, operating and
maintaining the welding machine? A. Welding machine manual B. Electrode C.
Manual D. Spats
_____26. What should you do if you accidentally weld on a live electrical wire?
a. Continue welding and ignore it b. Stop welding immediately and call an electrician c.
Attempt to repair the wire yourself d. None of the above
_____28. What should you do if you feel a tingling sensation while welding?
a. Ignore it and continue welding b. Stop welding immediately and check for proper
grounding c. Take a break and drink some water d. None of the above
_____29. What is the recommended personal protective equipment (PPE) for SMAW welding?
_____30. What type of shock hazard can occur when working with a Shielded Metal Arc Welding
(SMAW) process?
_____31. Give the appropriate code, Standard symbols for welding, brazing, and non-destructive
examination?
A. AWS A02.4 B. AWS A03.0 C. AWS A05.1 D. AWS A05.1
_____32. What is the primary welding code used for the construction of bridges?
a) AWS D1.1 b) AWS D1.2 c) AWS D1.5 d) AWS D1.6
_____33. What is the primary welding code used for the construction of pressure vessels
_____34. What is the primary welding code used for the construction of pipelines?
_____35. What is the primary welding code used for the construction of pipelines?
_____36. What is the primary welding code used for the construction of offshore structures?
_____37. What is the main purpose of selecting the appropriate electrode for a welding job?
_____38. Which type of electrode is typically used for welding low-carbon steel?
a. It reduces the risk of porosity in the weld b. It improves the strength of the weld
c. It increases the speed of the welding process d. It reduces the amount of spatter during welding
_____40. What type of electrode is best for welding in tight spaces or overhead?
_____45. Which of the following devices is used to measure essential current in an electrical
system?
_____48. Which of the following factors can affect essential current settings in an electrical system?
_____49. What is the recommended essential current setting for a residential electrical system?
_____50. What can happen if essential current settings are not properly adjusted in an electrical
system?
a) Circuit breakers may trip frequently b) Equipment may not function properly c) Increased
risk of electrical fires d) All of the above