You are on page 1of 2

Technology and Livelihood Education Majorship

1. What is the resistor value of Blue, Black, Orange and Silver?

a. 60K + 5% b. 50K + 5% c. 60K + 10% d. 50K + 5%

2. Electronic tools can last lifetime if they are _________________________.

a. used in many purposes b. inhibit rust because they are not lubricated
c. properly used based from the instructions given d. clean once in a while

3. A ____________ is a device that resists the flow of charge.

a. Resistor b. Buffer c. Diode d. Microfarad (or uF )

4. In logic gate, the output will be a LOW for any case when one or more inputs are zero in a (n):

a. OR Gate b. AND Gate c. NAND Gate d. NOT Gate

5. It is used to display the shape of electrical signals and it can be used to measure their voltage and
time period.

a. Galvanometer b. Ohmmeter c. Voltmeter d Oscilloscope

6. What is this symbol ?

a. Capacitor b. Variable capacitor c. polarized capacitor d. timmer capacitor

7. What is the color code for a 220 5% resistor ?

a. Red, Red, Brown, Silver b. Red,, Red, Brown, Gold


c. Red, Red, Black, Gold d. Orange, Orange, Black, Gold

8. Component that store electrical charge in an electrical field.

a. capacitors b. diode c. resistors d. transistors

9. What electronic circuit trouble is affected of environmental condition such as dust, dirt, and
humudity?

a. broken wiring inside cord set b. gummed up lubricant c. shorrt circuits d. insect damage

10. It is used to connect the holes where components are placed in a printed circuit board.

a. terminal strip b. copper tracks c. phenolic board d. copper board

11. A NAND gate has:

a. LOW inputs and a HIGH output b. LOW inputs and a LOW output
c. HIGH inputs and a HIGH output d. None of these above

12. What should an electrician first do before installing the electrical wiring system of a building?

a. Buy the materils b. Prepare a contract c. Get a meter base from Meralco d. Secure a wiring permit
13. What pencil point is best recommended in sketching?

a. Wedge b. Conical c. Dull d. Flat

14. Which of these finishing materias would give a transparent sheen to a wood surface?

a. Oil b. Abrasives c. Varnish d. Shellac

15. which of the following is not an electronics components?

a. diode b. capacitors c. resistors d. power

16. You wanted to shape your fingernails, which of these tools will you use?

a. emery board b. orangewood stick c. nail cutter d. tweezer

17. The following are materials and cosmetics in giving hot oil treatment EXCEPT __________.

a. conditioner b. hot oil c. heating caps d. tonic

18. Which of the following materials should not be missed to facilitate winding.

a. curlers b. end papers c. roller clip d. setting lotion

19. The following are tools for haircutting EXCEPT______________.

a. hair shaping scissor b. thinning shears c. straight razor d. water sprayer

20. What branch of physics refers to the flow of electron through nonmmetal conductors?

a. Mechanics b. Physics c. Electricity d. Electronics

You might also like