Professional Documents
Culture Documents
Region I
DEPARTMENT OF EDUCATION
SCHOOLS DIVISION OFFICE URDANETA CITY
BACTAD EAST NATIONAL HIGH SCHOOL
Urdaneta City, Pangasinan
TEST I – Choose the letter that bests answer the question or completes the statements. Encircle only.
Any forms of erasures are considered incorrect. (50 pts.)
5. The band in the color-coding scheme that permits the value to deviate to a certain extent?
a. multiplier b. body color c. limitation d. tolerance
12. Where is the function switch rested if an off position is not available in the VOM?
a. 10VDC b. 00 VAC c. 50 VAC d. 250 VAC
13. Place instruments in a cool dry place and away from any ______ devices.
a. Other instrument b. magnetic devices c. audio amplifiers d. digital sources
14. What measuring instrument should be given regular check up by connecting them to power line?
a. Capacitor tester b. Oscilloscope c. Resistor d. Wire Splicer
15. Pliers
a. Always keep pliers in good condition by cleaning and regular application of oil.
b. Never use pliers as substitute for a wrench or hammer.
c. Never hammer the pliers when cutting wires
16. Files
a. When using file, keep a firm grip on its handle at all times.
b. Do not blow filings as they may get into your eyes.
c. Always use a file card in cleaning a file.
19. Screwdriver
a. Select screwdriver that’s fit the screw head slot perfectly.
b. Keep the screwdriver’s handled dry, and clean to prevent slippages.
c. Never use a screwdriver as chisel.
d. Never hammer a screwdriver’s handle.
20. As part of the normal operating and safety procedure, these tools should be returned to the _________ after used.
a. Classroom b. store c. laboratory d. toolbox
27. Which among the following tool reproduce the measurements of an object in a reduced or enlarged size?
a. Compass b. protractor c. magnifying glass d. triangular angle
28. Drafting tool used to protect the rest of the drawing when two equal sides meeting at 90◦ angle and to a third scale at 45◦, 35◦,
including 60◦ angles. It is used to draw vertical lines.
a. Ruler b. T-squares c. Tringles d. Triangular Scale
32. What is the best place for electronic hand tools and equipment?
a. Tool Box b. Tool Cabinet c. tool Room c. Tool Bag
33. The correct use of hand tool is always the key to __________________________.
a. Project construction b. Components Soldering
b. Lab safety Program d. Environmental compliance
34. Which among the following tools needs to be tested once a week?
a. DMM b. Frequency Meter c. Oscilloscope d. VOM
35. Always keep hand tools clean and free from ____________________.
a. Dust b. contaminants c. machine oil d. Moisture
II. TRUE OR FALSE: Tell whether the following statement is TRUE or FALSE. Write T if the statement is true and F if the statement is false
in the space provided.
_______ 1. It’s not necessary to know where the emergency stop buttons/power switches are positioned in the workshop.
_______ 3. Follow all cautions, warnings, and instructions marked on the equipment.
_______ 4. Use a tool/machine even if you have not been shown how to operate it safely by the teacher.
_______ 5. Working areas are not necessary be clean and free from disposable materials.
_______ 6. Do not run in the workshop, you could “bump” into another student and cause an accident.
_______ 7. Use dull or damaged tools if good tools are not available.
_______ 10. Never put fasteners or any small metal articles in or near your mouth when working.
_______11. As a rule, all passages must be free of any obstruction that will hamper the movement of persons in the area.
_______12. Treat every wire in the electrical system as live wire and act accordingly. Always attempt to work in any “live” electronic or
electrical circuits.
_______13. Never use tools or equipment tools or equipment you are not familiar with, or you do not know how to operate. Always ask
assistance from your teacher to avoid accidents.
_______14. The shop is a place of work so one can engage in a play while at work.