Professional Documents
Culture Documents
Wheel Loader
General Purpose Buckets are Side Dump Bucket dumps Multi-Purpose Bucket loads, bull-
made from high-strength, wear resis- forward or to the left. Reduces dozes, strips top soil and cleans up
tant steel plate and bracing, joined by turning, aids close-quarter loading debris. Optional teeth aid digging.
rcÙ% penetration welds. Cutting edge, and vvork on public streets. 740 lb. 740lb. (335 kS) counterweight recom-
side plates, bottom replaceable wear (335 kg) counterweight recom- mended. Additional hydraulic valve
plates and reinforced hinge guards are mended. Additional hydraulic valve required.
heat treated to last longer. Nine teeth required. Nine teeth with short
with long or short tips are optional. tips are optional.
93cI
Wheel Loader
Specifications and ratings conform to all applicable standards recommended
by the Society of Automotive Engineers. SAE Standard J732c (1969)
governs loader ratings, denoted in the text by (S).
STANDARD EQUIPMENT
Alternator, 19 amp. Front and rear Adjustable seat. Engine oil pressure.
Blower fan. working lights. Fuel pressure.
Fuel priming pump. Dry-type air cleaner. Gauges: Torque converter temperature
Muffier. Rear drawbar. Engine jacket water and visual indicator for
Fenders. Roll-over protective temperature. parking brake and low
Stop and tail lights. structure mountings. Ammeter. arr pressure.
MACHINE DIMENSIONS' approx. S:
26Y."
TENGTH I
I VARIES WITH BUCKET SIZE-
REFER IO OPERAÏING SPECIFICATIONS
OPERATI NG SPECIFICATIONS:
Capacity, struck S 1.68 cu. yd. 1.89 cu. yd. 1.38 cu. yd. L.AL cu. yd.
(L,28 mB) (1,45 mB) (1,06 mB) ( 1,08 mB)
Cutting edge, type Straight Straight Straight Straight
width 96" (2440 mm) 96" (2440 mm) 96" (2440 mm) 109.5" (2780 mm)
Dump clearance @ full lift g'L" (2770 mm)
and 45" discharge g'3y2" (2830 mm) 8', 10" (2690 mm) 9'IYz" (2780 mm)
Reach at 45" discharge,
7' (2130 mm) clearance 4' 3y2" (1310 mm) 4' 4y2" ( 1330 mm) 4' \Vz" (1310 mm) 4, 4r/2,, (1980 mm)
Reach at full lift and
45" discharge S 32%" (830 mm) 34" (860 mm) 35" (890 mm) 34" (860 mm)
Overall lenoth E 19' lL" (6070 mm) 20',L" (6L20 mm) 20'6" (6250 mm) 20' 2" (6150 mm)
Overall heiohf. E Ll', LL" (4850 mm) 16', 1" (4900 mm) L5'6yz" (4740 mm) L5, 6r/2,, (4740 mm)
Loader clearance circle
(bucket in carry position) S 38',8" (11,8 m) 39', (11,9 m) 39', 6" (12,o m) 40' 2" (L2,2 m')
Static tipping load * *
Sf.raioht E 13,750 lb. 13,600 lb. L2,430lb. L2,780Lb.
(6230 ks) (6170 kg) (5630 kg) (57e0 ks)
Full 35" turn S L2,470lb. L2,320Ib. 1"1,200 lb. 11,560 lb.
(5650 kg) (5580 kg) (5080 kg) (52aoks)
Breakout force* S 19,430 lb. 17,480 lb. 15,800 lb. L7,290Lb.
(8810 ks) (7e30 kg) (7160 kg) (78a0 kg)
Operating weightx r' 19,300 lb. 19,400 lb. 20,100 lb. 19,700 Ib.
(8750 ks) (8800 ks) (el20 kg) (8e30 kg)
*Measured 4" (LO2 mm) behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732c (1969).
{'*Static tipping load and operating weight shown include 880 lb. (400 kg) CaCl: solution in rear tires. Machine stability is affected
by tire size, tire ballast or attachments. For selected items add the following to machine operating weight and static tipping load:
Change in Change in Artieulated
Operating Weight Static Tipping Load
14.00-24, !2 PR (L-2) tires without ballast -880 lb. (-400 kg) -L,2OO lb. (-540 kg)
77.5-25, 12 PR (L-3) tires with 75% CaClz 740 lb. (335 kg) 680 lb. (310 kg)
Counterweight 735 lb. (335 kg) 1,270 lb. (580 kg)
Cab 650 Ib. (294]r.ù 650 lb. (294 kg)
M u lti -Pu rpose Specifications:
Dumping Forward or bottom
A - Fonvard dumping clearance
45" dischaige
@
B - Bottom dumping clearance
@ 45" dischàrgè 10' 3" (9t20 mm)
Side Dump Specifications: S C - Hinge pin height LL' Ll"
(3630 mm)
oPTToNAL EQUTPMENT
(with approximate installed weights)
Moteriols ond specificolions ore subiect to chonge without nolice. Coterpiltor, Cot ond [E ore Trodemorks of Coterpillor Troctor Co.
4E04064r (5-721
Reploces A.8010526 Printed in U.S.A.