Professional Documents
Culture Documents
Dear Sirs,
Refer to the above, we are pleased to present our inspection report as follows:
DATA OF ENGINE
INSPECTION PROCEDURE
1. Dismantling components
2. Put tag number/marks on each engine parts & components after dismantling.
3. Visual inspection and identify the broken and or damaged and or worn out parts.
4. Make Inspection & finding report
5. Make Recommendation
6. All engine part & components shall be protected by oil/grease & wrapping after dismantling and clean up and then
stored for further process.
2. Front Crankshaft & Timing Case Found oil leakage. Repair & replace new part
3. Oil Sump Found oil leak at valve drain Repair connector & Replace
connector & gasket sump gasket.
Valve Drain
Connector
13. Incomplete component parts : Not found in engine unit : Purchase of new spare parts
Radiator Assy
Turbocharger
Battery
CONCLUSION :
1. Based on finding, inspection internal/external parts and components should be to replaced with new one and
repaired (machining), therefore this engine unit for general overhaul.