This document is a quality verifying report and control valve calibration record for tag number 21-LV-1803. It documents the test results from calibrating the control valve, including input and output signals at different percentages, error rates, air failure action, limit switch results, positioner results, hand wheel operation, HART position, stroking times, and seat leak test results. The document was signed off by representatives from MMG, SATEC, and YANSAB to verify the quality of the calibration work.
This document is a quality verifying report and control valve calibration record for tag number 21-LV-1803. It documents the test results from calibrating the control valve, including input and output signals at different percentages, error rates, air failure action, limit switch results, positioner results, hand wheel operation, HART position, stroking times, and seat leak test results. The document was signed off by representatives from MMG, SATEC, and YANSAB to verify the quality of the calibration work.
This document is a quality verifying report and control valve calibration record for tag number 21-LV-1803. It documents the test results from calibrating the control valve, including input and output signals at different percentages, error rates, air failure action, limit switch results, positioner results, hand wheel operation, HART position, stroking times, and seat leak test results. The document was signed off by representatives from MMG, SATEC, and YANSAB to verify the quality of the calibration work.
TAG NO.: 21-LV-1803 WORK NO.: BA-0734 AREA/UNIT: TYPE DESCRIPTION: CONTROL VALVE TURNOVER SYSTEM: TURNOVER SUB-SYSTEM: LOCATION: INSPECTION GRADE (YANSAB): FIELD INSPECTION NOTICE NO.:
REFERENCE DRAWING: 21-R-LV1803-DS, Sheet # 1 & 2
Instrument Manufacturer: Model: Loop No.
Valve Type: Globe Ball Butterfly Other:
Range (Input Signal): 0.2 to 1 barg 0.4 to 2.0 barg Other:
Valve Characteristic: Linear Equal % Quick Opening Other:
Test Results
Test Equipment Serial No. Calibration Due Date
Valve Supply Pressure = _______________
Valve Position (Output) Input Signal Pass or Initial Rising Falling Fail % mA Actual % % Error Actual % % Error MMG SATEC YANSAB 0 4 25 8 50 12 75 16 100 20
Air failure Action: FO FC FLO FLC Result _______
Limit Switches: Open Close Result ________
Positioner: Result _______ Solenoid Valves: Result ________
Hand Wheel: Result _______ HART Position: Result ________
FF [Foundation Result _______ Fieldbus]: Stroking Time: Open to Close ________ seconds Close to Open ___________ seconds
Seat Leak Test: Result _______
Comments:
MMG SATEC YANSAB
Name: Name: Name:
Signature: Signature: Signature:
Date: Date: Date:
677038246.xls Rev. 2 L Saudi Toyo Engineering Company (SATEC)