You are on page 1of 14

Validate Print Help Item Rate BoQ

Tender Inviting Authority:- Executive Engineer Jal Shakti Division Larji

Name of Work :- Providing water Supply scheme to Palgi, Dhallan, Muhan, Garsa, Railla-Rote, Bhallan, Dhara, Talara, Ronal-Donal, Kashadhi, Dari, Phallana, Kothi Cheh
Khadagad, Seri, Balagad, Tandi, Chethar, Pekhari, Sarchi, Laida, Tilroo, Thatibir, Ratwah etc in Tehsil Banjar, Distt. Kullu H.P (SH:- C/O Head weir , Intake structure , Filt
Sqm . Pump house , Sump well 64500 ltrs , CWT 128500 ltrs,, Main Storage tank 260000 ltrs , sector storage tank of various capacity , Thrust block for rising main, Fenc
around the civil structure , B.P tank , Nallha crossing , Retaining wall, Breast wall , to WSS to Palgi, Dhallan, Mahun Garsa, etc Under Jal Shakti Sub Division Bajaura )
Estimatesd Cost :- 3,55,61.598/- Earnest money :- 3,88,116/- Time :- 9 months

Contract No:
Name of the Neeraj Sharma
Bidder/ Bidding
Firm / Company :

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rej
tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER # TEXT # NUMBE TEXT NUMBE NUMBER # NUMBER #
Sl. Item Description Quantity
R# Units
# Estimate
R BASIC TOTAL
No. d Rate in RATE In AMOUNT
Rs. P Figures To Without
be entered Taxes in
by the Rs. P
1 2 4 5 6 13 in
Bidder 53
1 Excavation in foundations, trenches etc., in earth work , lift up to 1.50 metres stacking 1970.56 Cum. Rs. 480.00
P #VALUE!
the excavated soil not more then 3 metres clear from the edge of excavation and then
returning the stacked soil in 15 cm layers, when required in to plinths , sides of
foundations etc., consolidating each deposited layer by ramming and watering and then
disposing of all surplus excavated earth as directed within a lead of 20 metres in pick
jumper work complete in all respects with in all leads and lifts as per direction of Engineer
in charge.

2 Providing and laying cement concrete 1:3:6 ( 1cement: 3 Sand : 6 graded stone 100.79 Cum. 8100.00 #VALUE!
aggregate, 40mm nominal size) and curing complete excluding cost of centring and
shuttering in foundation and plinth complete in all respects with in all leads and lifts as per
direction of Engineer in charge.

3 Providing and laying cement concrete 1:4:8 ( 1cement: 4 Sand : 8 graded stone 112.26 Cum. 7600.00 #VALUE!
aggregate, 40mm nominal size) and curing complete excluding cost of centring and
shuttering in foundation and plinth complete in all respects with in all leads and lifts as per
direction of Engineer in charge.

4 Providing and laying cement concrete 1:6:12 (1 cement: 6 sand: 12 graded crushed 13.52 Cum 7000.00 #VALUE!
stone aggregate 40mm nominal size) and curing complete excluding cost of form work in
foundation and plinth in all leads and lifts and to the enitre satisfaction of Engineer-in-
charge.

5 Providing form work with steel plates3.15mm thick welded with Providing form work with
steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a
fairfinish I/c centring , shuttering , strutting and proping etc.with wooden battens and
ballies, height of propping and centring below supporting floor to ceiling not exceeding
4m and removal of the same for insitu- reinforced concrete &plain concrete work in
complete in all respects with in all leads and lifts as per direction of Engineer in charge.

5.01 Foundation, footings basis of columns etc. and mass concrete complete in all respects 386.80 Sqm 312.00 #VALUE!
with in all leads and lifts as per direction of Engineer in charge.

5.02 Flat surfaces such as soffits of suspended floors , roofs, landings & the like . Floors etc. 266.25 Sqm 500.00 #VALUE!
up to 200 mm in thickness complete in all respects with in all leads and lifts as per
direction of Engineer in charge.
5.03 Vertical surface such as walls(any thickness) partitions and the like including attached 3634.07 Sqm 400.00 #VALUE!
pillasters, butteresses, plinth and string courses and the like complete in all respects with
in all leads and lifts as per direction of Engineer in charge.

5.04 Sides and Soffits of beams, beam haunchings, contiliver girders, bressumers and lintels 122.96 Sqm 450.00 #VALUE!
not exceeding 1 Metre in depth in all heights from floor complete in all respect with in all
leads and lifts.

5.05 in column pillars , post struts in CSrcularor curved in plain complete in all respects with in 344.00 Sqm 500.00 #VALUE!
all leads and lifts as per direction of Engineer in charge.

5.06 Edge of slab complete in all respect with in complete in all respects with in all leads and 47.84 Rmt. 120.00 #VALUE!
lifts as per direction of Engineer in charge.

6 Providing from work of ordinary timber plankings so as to give a rough finish including
centring,shuttering, strutting and propping etc. height of propping and centring below
supporting floor to ceililng not exceeding 4 metres and removal of the same for in situ
reinforced concrete and plain concrete work in:-

6.01 Arches exceeding 6 metres span. in complete in all respects with in all leads and lifts as 160.57 Sqm 2600.00 #VALUE!
per direction of Engineer in charge.

7 Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone
aggregate 20mm nominal size)and curing complete excluding cost of form work and re-
inforcement for reinforced concrete work in:

7.01 Foundations, footings, bases of columns and the like and mass concrete in complete in 444.19 Cum 10000.00 #VALUE!
all respects with in all leads and lifts as per direction of Engineer in charge.

7.02 in wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, 339.24 Cum 10500.00 #VALUE!
plinth and string courses, etc. from top of foundation level upto floor two level in complete
in all respects with in all leads and lifts as per direction of Engineer in charge.

7.03 iii)Suspended floors, roofs,landings and shelves and their supports, balconies, beams, 24.90 Cum 10500.00 #VALUE!
girders, bressumers and cantilivers up to floor two level in complete in all respects with in
all leads and lifts as per direction of Engineer in charge.

7.04 Columns pillars , Posts etc upto floor teo level complete in all respect as per the direction 3.50 Cum 11800.00 #VALUE!
and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

7.05 Beam cantiliver girders and lintels Sides and soffits of beams, beam haunchings, 11.70 Cum 10200.00 #VALUE!
cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor
in complete in all respects with in all leads and lifts as per direction of Engineer in charge.

7.06 Arches upto floor two level in complete in all respects with in all leads and lifts as per 16.06 Cum 10800.00 #VALUE!
direction of Engineer in charge.

8 Providing and laying cement concrete 1:2:4(1cement:2sand:4graded stone agg. 20mm 12.73 Cum 9200.00 #VALUE!
nominal size) excluding cost of form work and reinforcement for reinforced concrete work
in suspened floors,roofs,landing and shelves and their supports ,balconies,
beams,girders,bressumers and cantilever upto floor two level .

8.01 Foundations, footings, bases of columns and the like and mass concrete in complete in 18.96 Cum 9000.00 #VALUE!
all respects with in all leads and lifts as per direction of Engineer in charge.

8.02 Columns pillars , Posts ,struts , square , rectangular on plygonal in plan complete in all 24.20 Cum 9200.00 #VALUE!
respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all
leads and lifts.

9 Providing in RCC work smooth finishing of the exposed surface with cement mortoe 1:3 759.99 Sqm 170.00 #VALUE!
( 1 cement :3 sand) in complete in all respects with in all leads and lifts as per direction
of Engineer in charge.

10 Providing mild steel/tor steel reinforcement including bending, binding and plaCSng in 58735.63 kg. 88.00 #VALUE!
position complete up to floor two level in complete in all respects with in all leads and lifts
as per direction of Engineer in charge.

11 Steel work welded in bulit up sections, trusses and framed work i/c cutting, hoisting, fixing 3244.23 Kg. 115.00 #VALUE!
in position and applying priming coat of red lead paint in :- Gratting, framed guard, bars,
ladders and similar work in complete in all respects with in all leads and lifts as per
direction of Engineer in charge.

12 Brick work using common burnt clay building bricks in super structure above G.L to 1st 95.20 Cum 10400.00 #VALUE!
floor 2nd class bricks cement mortar 1:4(1cement:4sand) with in complete in all respect
as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads
and lifts.
13 Brick work using common burnt clay building bricks in foundation and plinth 1st class 84.22 Cum 10000.00 #VALUE!
bricks cement mortar 1:6 (1cement:6 sand) with in complete in all respect as per the
direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

14 Providing and fixing angle iron door, window,clerestory window frame manufactured from 12.90 Rmt. 450.00 #VALUE!
steel iron section of 40x40x6mm, thickness including hinges jamb, lock jamb,beed and if
rerquired angle threshold of mild steel angle 50x25mm welded or rigidly fixed by
mechanical means, lugs with split end tails to each jamb including butt hinges
2.50mmthick with provision for locking arrangement and shock as speCSfied and
applying a coat of approved steel primer after pretreatment of the surface as directed by
the Engineer-in-charge.

15 Providing wood work in frames of doors, wndows, clerestory windows and other frames 1.12 Cum 96500.00 #VALUE!
wrouhgt, frramed and fixed in position in 2nd class Deodar wood within all leads and lifts
as per direction & satisfaction of Engineer-in-charge.

16 Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows 27.22 Sqm 4500.00 #VALUE!
and clerestory windows i/c bright finished black enammeled iron hinges with necessary
screws: 2nd class deodar wood 40mm thick including entire carriage of material as per
satisfaction of Engineer-in-charge.

17 Half brick work using common burnt clay buildings bricks in superstructure above 1st 11.60 Sqm 1420.00 #VALUE!
floor level in cement mortar 1:4(1cement:4sand) 2nd class bricks with in complete in all
respects with in all leads and lifts as per direction of Engineer in charge.

18 Pointing on brick work with cement mortar 1:4 (1 cement:4 sand) raised & cut with in 224.76 Sqm 240.00 #VALUE!
complete in all respect as per the direction and to the entire satisfaction of the Engineer-
in-charge in all leads and lifts.

19 6mm thick cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) with in complete in all 170.55 Sqm 245.00 #VALUE!
respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all
leads and lifts.

20 15 mm thick cement plaster in single coat on rough side of brick/concrete stone walls for 219.54 Sqm 280.00 #VALUE!
interior plastering up to floor two levels including arrises, internal rounded angles,
chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and
smooth in cement mortar 1:6 (1 cement:6 sand) with in complete in all respects with in all
leads and lifts as per direction of Engineer in charge.

21 20 mm cement plaster in single coat on rough side of brick/stone//concrete stone walls 32.19 Sqm 300.00 #VALUE!
for interior plastering up to floor two levels including arrises, internal rounded angles,
chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and
smooth in cement mortar 1:6 (1 cement:6 sand) with in complete in all respects with in all
leads and lifts as per direction of Engineer in charge.

22 Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with 143.00 Kg. 156.00 #VALUE!
M.S. Flats, square or round bars with round headed bolts and nuts or by screws with in
complete in all respect as per the direction and to the entire satisfaction of the Engineer-
in-charge in all leads and lifts.

23 Providing and fixing wire gauge shutters using galvanised M.S.wire gauge of I.S gauge 28.68 Sqm 3200.00 #VALUE!
designation 8 S.G. with wire of dia 0.56mm for doors windows and clerestory
windowsincluding bright finished black enamelled iron hinges with necessary screws
30mm thick 2nd class deodar wood with in complete in all respects with in all leads and
lifts as per direction of Engineer in charge.

24 Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of speCSfied 90.20 Sqm 1580.00 #VALUE!
sizes laid in floors treads of steps and landings on a bed of 25 mm average thickness of
cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment
to match the shade of tiles(wherever required) incliding rubbing and polishing complete
with tiles with in all leads and lifts..

25 Boulder filling behind retaining wall under floor with in complete in all respect as per the 42.22 Cum 2800.00 #VALUE!
direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.
26 Cement concrete flooring 1:2:4(1 cement: 2 sand: 4graded stone agg. 20mm nominal 2.88 Sqm 520.00 #VALUE!
size) laid in one layer finished with a floating of neat cement 40mm thick in complete in all
respects with in all leads and lifts as per direction of Engineer in charge.

27 Providing 40x3mm flat iron hold fast 40cm long i.e fixing to from with 10mm dia bolts, 60.00 Each 150.00 #VALUE!
nuts and wooden plug and embedding in cement concrete block 30x10x15cm 1:3:6
( 1cement 3 sand 6 graded stone agg. 40mm nominal size) in complete in all respect as
per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and
lifts.

28 White washing with lime on undecorated wall surfaces(two coats) to give an even shade 222.03 Sqm 19.00 #VALUE!
including thoroughly brooming the surface to remove all dust dirt & other foreign matter
with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in -
Charge.

29 Distempering with Oil bound distemper of approved brand and manufacturer (two coats) 84.03 Sqm 90.00 #VALUE!
and of required shade on un-decorated wall surface to give an even shade over and
including priming coat of whiting after througly brushing the surface free from mortar and
other foreign matters with in all leads and lifts complete in all respect. in all leads and lifts.

30 Distempering with dry distemper of approved brand and manufacturer (two coats) and of 84.03 Sqm 106.00 #VALUE!
required shade on un-decorated wall surface to give an even shade over and including
priming coat of whiting after througly brushing the surface free from mortar and other
foreign matters with in all leads and lifts complete in all respect. in all leads and lifts.

31 Finshing wall with with water proffing cement paint of approved brand and manufacture 32.19 Sqm 112.00 #VALUE!
(two coats) brushing to give an even shade i/c cleaning of oil, dirt, dust and other foreign
matters, sand papering and knotting etc. in all leads and lifts complete in all respect

32 Providing and fixing anodized M.S sliding door bolt anodized transparent or dyed to
required colour and shade with bolts and nuts and screw in complete in all respects with
in all leads and lifts as per direction of Engineer in charge.

32.01 300x16mm 4.00 Each 260.00 #VALUE!

32.02 250x16 2.00 Each 230.00 #VALUE!

33 Providing and fixing MS tower bolts(barrel type)anodized transparent or dyed to required


shade and colour with screws etc. in complete in all respect as per the direction and to
the entire satisfaction of the Engineer-in-charge in all leads and lifts.

33.01 200x10mm. 60.00 Each 55.00 #VALUE!

33.02 150x10 mm 6.00 Each 50.00 #VALUE!


34 Providing and fixing M.S handles anodized transparent or dyed to required colour or 46.00 Each 50.00 #VALUE!
shade with necessary screws etc. in complete in all respects with in all leads and lifts as
per direction of Engineer in charge. 125mm

35 Applying priming coat on new wood and wood based surfaces with ready mixed paint and 54.44 Sqm 51.00 #VALUE!
brushing to give an even shade including cleaning of all dirt,dust and other foreign matter
with in complete in all respect as per the direction and to the entire satisfaction of the
Engineer-in-charge in all leads and lifts.

36 Painting two coats (excluding priming coat) on new wood and wood based surfaces,with 54.44 Sqm 100.00 #VALUE!
enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other
foreign matters sand papering and stopping with readymade paint other than white with in
all leads and lifts..

37 Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement: 3sand: 6 20.68 Sqm 500.00 #VALUE!
graded stone aggregate 20mm nominal size). with in all leads and lifts

38 Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( MG) including
fitting and clamps including making good the wall ceiling and floor complete in all respect
in all leads and lifts and to the entire satisfaction of Engineer-in-charge ..

38.01 a) 15mm nominal size 24.00 Rmtr. 290.00 #VALUE!

39 Providing and placing (at all heights) polyethylene water storage tank ISI : 12701 marked 2.00 Each 9800.00 #VALUE!
indicating the BIS License No. with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes including all fittings and float valve
excluding the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having
valid ISI license ]. 1000 Ltrs. capacity

40 Providing and fixing vitreous china wash, down water closet (European type. W.C. pan) 2.00 Each 9000.00 #VALUE!
with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1
cement: 1 sand). Seat and cover to be measured and paid for seperately. Anglo Indian
Universal closet.in complete in all respects with in all leads and lifts as per direction of
Engineer in charge.
41 Providing and fixing plastic seat and cover for wash down water closet with C.P. brass 2.00 Each 1000.00 #VALUE!
hinges and rubber buffers: White plastic seat and cover, solid type in complete in all
respects with in all leads and lifts as per direction of Engineer in charge.

42 Providing and fixing P.V.C. low level flushing Cistern with manually controlled device 2.00 Each 2000.00 #VALUE!
(handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre
capacity - White

43 Providing and fixing PVC / G.I. inlet connection for flush pipe connecting with W.C. pan in 2.00 Each 270.00 #VALUE!
complete in all respects with in all leads and lifts as per direction of Engineer in charge.

44 Providing and fixing C.P. brass stop cock (concealed) of standard design and of 2.00 Each 1400.00 #VALUE!
approved make conforming to IS:8931. 15 mm nominal bore in complete in all respects
with in all leads and lifts as per direction of Engineer in charge.

45 Providing and fixing C.P. brass angle valve of standard design and of approved make, 4.00 Each 1400.00 #VALUE!
15mm nominal bore in complete in all respects with in all leads and lifts as per direction
of Engineer in charge.

46 Providing and fixing C.P. water jet including connection pipe with check nut in complete in 2.00 Each 1000.00 #VALUE!
all respects with in all leads and lifts as per direction of Engineer in charge.

47 Providing and fixing PVC pipes of 10 Kg f/Sq.cm working pressure including fittings as 20.00 Rmtr. 800.00 #VALUE!
per requirement at site complete in all respect in all leads and lifts and to the entire
satisfaction of Engineer-in-charge .110 mm OD

48 Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC 28.00 Each 1120.00 #VALUE!
insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible)
copper conductor cable in surface/recessed PVC conduit and earthing the light point with
1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required
Group-C in complete in all respects with in all leads and lifts as per direction of Engineer
in charge.
49 Wiring for CSrcuit/sub-main with following size PVC insulated heat resistant flame
retardant (HRFR) and low smoke single core (flexible) copper conductor cable in
surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core
copper conductor cable of same size for earthing as required in complete in all respects
with in all leads and lifts as per direction of Engineer in charge.

49.01 2x1.5 Sq. mm. 300.00 Mtrs. 170.00 #VALUE!

49.02 2x4.0 Sq. mm. 200.00 Mtrs. 200.00 #VALUE!

50 Supply and fixing Socket outle on the exists switch box/covers including connections etc. 10.00 Each 50.00 #VALUE!
as required in complete in all respects with in all leads and lifts as per direction of
Engineer in charge. 5 pin 5/6 amps, percelain boxe/piano type

51 Supply and fixing/piano type switch on the existing switch box on the switch box/cover 10.00 Each 60.00 #VALUE!
including connection etc. as required in complete in all respects with in all leads and lifts
as per direction of Engineer in charge. SP 5/6 amps , one way switch.

52 Supplying and fixing Socket outlet on the exists switch box/covers including connection 10.00 Each 90.00 #VALUE!
etc. as required in complete in all respects with in all leads and lifts as per direction of
Engineer in charge. 6 pin 15/16 amps, socket outlet ,percelain boxe/piano type

53 Supply and fixing piano type switch on the existing switch box on the switch box/cover 10.00 Each 100.00 #VALUE!
including connection etc. as required in complete in all respects with in all leads and lifts
as per direction of Engineer in charge. SP 15/16 amps, one way switch.

54 Supplying and fixing woodern box of following size (nominal) on surface or recess with
suitable size of phenolic laminated sheet cover of in front as required in complete in all
respects with in all leads and lifts as per direction of Engineer in charge.
54.01 a) 229mm x102mmx60mm deep 10.00 Each 250.00 #VALUE!

54.02 b) 203mmx152mmx60mm deep 10.00 Each 200.00 #VALUE!

55 Supplying and fixing ceiling rose on existing junction box/wooden block including 200.00 Each 60.00 #VALUE!
connections etc. as required in complete in all respects with in all leads and lifts as per
direction of Engineer in charge.

56 Supplying and fixing plain pandent with 16/0.20mm twin twisted, flexible PVC insulated 10.00 Each 90.00 #VALUE!
copper cable and backlite pendant holder including connection etc as required in
complete in all respects with in all leads and lifts as per direction of Engineer in charge.

57 Supplying and fixing 6 Amps to 32 Amps rating,10 KA breaking capacity 240 volts, C- 12.00 Each 300.00 #VALUE!
Curves miniature Circuit breaker of following poles in the existing MCB Db complete with
connection testing and commissioning etc. as required Cat-A (single pole) in complete in
all respects with in all leads and lifts as per direction of Engineer in charge.

58 Supplying and fixing of following way, single pole and netural, sheet steel, MCB 2.00 Each 1500.00 #VALUE!
distribution board, 240 volts on surface/recess, complete with tinned copper busbar,
netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting,
earthing etc. as required busbar in complete in all respects with in all leads and lifts as
per direction of Engineer in charge. Single door 8 way

59 Supplying and fixing following rating, double pole, 240volts, isolator in the existing MCB 2.00 Each 500.00 #VALUE!
DB complete with connection, testing and commissioning etc. as required 63Amp
Cat-A complete in all respects with in all leads and lifts as per direction of Engineer in
charge.

60 Providing, installing, testing and commissioning of ceilling fan and regulator i/c wiring the 2.00 Each 3000.00 #VALUE!
down rod of standard length (upto 30cm with 16/.20 mm twin twisted flexible,cotton
braided copper cable including providing and fixing phenolic laminated sheet cover on the
fan box and earthing etc as required. Ceiling fan 1400mm sweep Cat.-A complete in all
respects with in all leads and lifts as per direction of Engineer in charge.
61 Providing and fixing ultra slim decorative extruded box fixture with domestic electronic 8.00 Each 600.00 #VALUE!
ballast, snap-on installers, suitable for 28watt FTL (T5), complete with all accessories
(including one no. T-5 tube), connections, testing and commissioning etc. as required.
1x28 watt-FTL (T5) Category-A complete in all respects with in all leads and lifts as per
direction of Engineer in charge.

62 Providing and fixing following type of surface mounting decorative mirror optics luminaire 8.00 Each 2500.00 #VALUE!
with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, pre-
wired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost
of CFL), complete with all accessories, connections, testing and commissioning etc. as
required. 3 x36 watt-CFL (Category-A) complete in all respects with in all leads and lifts
as per direction of Engineer in charge.

63 Providing and fixing two core service wire 6sqmm thick in all leads and lifts 200.00 Mtrs. 60.00 #VALUE!

64.00 laying and jointing of G.I pipe for ( Scour pipe) with complete in all respects with in all
leads and lifts as per direction of Engineer in charge. ( labour rate )

64.01 50 mm dia 12.00 Rmt. 80.00 #VALUE!

64.02 100 mm dia 123.00 Rmt. 160.00 #VALUE!

65.00 Providing and fixing Gun metal wheel valve of all approved make as per specification 50 2.00 Each 2500.00 #VALUE!
mm dia complete in all respects with in all leads and lifts as per direction of Engineer in
charge.

66.00 Providing and fixing wheel valve of all approved make of following dia including all kinds
of leads and lifts complete as per specification with in all leads and lifts
66.01 20mm dia. 5.00 Each 1060.00 #VALUE!

66.02 25mm dia. 4.00 Each 1420.00 #VALUE!

66.03 32 mm dia 3.00 Each 2200.00 #VALUE!

66.04 40mm dia. 7.00 Each 3000.00 #VALUE!

66.05 50mm dia. 21.00 Each 4098.00 #VALUE!

67.00 Providing and fixing SFRC man hole cover with frame having frame size of 500 mm 70.00 Nos. 2440.00 #VALUE!
internal dia ( The weight of frame should not be less than 100 kg) complete in all
respects with in all leads and lifts as per direction of Engineer in charge.

68.00 Providing and placing in horizontal layers filtering media duly graded, screened,cleaned
and washed as specified complete in all respects with in all leads and lifts as per
direction of Engineer in charge.

68.01 Top layer, Fine sand( Eff. Size 0.20mm to 0.40 and uniformity co-effiCSent 2.00 to 3.00). 137.70 Cum 3600.00 #VALUE!
68.02 Second layer, Coarse sand, 3mm - 6mm 24.30 Cum 3400.00 #VALUE!

68.03 Third layer : Bajri 6mm to 20 mm. 12.15 Cum 3360.00 #VALUE!

68.04 Fourth layer : Bajri 20mm to 25 mm 16.20 Cum 3300.00 #VALUE!

68.05 Bottom layer : Broken stone 50mm to 75 mm. 24.30 Cum 3200.00 #VALUE!

69.00 Providing & placing Precast Concrete Block in CC 1:2:4 of size 0.30 x 0.40 x 0.05 ( I 134.00 Each 128.00 #VALUE!
cement :2 sand ;4 graded stone aggrigate 20 mm nominal size)over X Drain complete in
all respects with in all leads and lifts as per direction of Engineer in charge.

70.00 Providing and laying cement concrete 1:5:10(1cement:5sand:10 graded stone aggregate 676.30 Cum 6280.00 #VALUE!
of 40mm nominal size) with 15% plum and curing complete excluding cost of form work in
retaining walls/breast walls, the size of plums shall usually be 150mm to 300mm as per
H.P.P.W.D specification including all leads and lifts

71 Providing and fixing C.S sluice valve ( with hand wheel ) kilburn , L&T , Standerd / Havels 22.00 Each 21000.00 #VALUE!
& all approved make as per IS:780 Class-I upto 100 mm dia ( including brass spindal
and as per IS; 2906 class- for diameters more than 100 mm complete including all alided
accessories. with in all leads and lifts

72 Providing and fixing 1.80 mtrs heigh fencing with 2.50 mtrs. M.S. angle iron of size 2915.20 Rmt. 148.00 #VALUE!
40x40x6mm minimum 2.50 mtrs. C/C with nine horizontal lines and two diagonal of
galvanised steel barbed wire (IS-278-1962 type-1) weight of 9.38 Kg./100 mtrs.
(minimum) storical and fixed to post complete cost of posts structs and straining bolts
shal be paid for separately horizontal and diagonal wire complete in all respects with in all
leads and lifts as per direction of Engineer in charge.
73 Providing &Fixing of fencing panels of Size 2.40 mtr x 1.20 mtr devided in Two Panels of 140.00 Each 2960.00 #VALUE!
1.20 m X 1.20 M by fixing T iron at centre fitted with wire mesh 25 m.m x25mm welded to
MS angle frame all around with MS flat cover and seven Nos. hold fasts including cutting
welding painting with red oxide paint complete in all respects with in all leads and lifts as
per direction of Engineer in charge.

74 Providing and fixing PVC pipe 100 mm dia ( outer) for weep hole in R/ Wall , PCC wall i/c 139.40 Rmt. 360.00 #VALUE!
with in all leads and lifts as per the direction and to the entire satisfaction of the Engineer-
in-charge required at site

75 Random rubble masonry / Polygonal rubble masonry (coursed or brought to courses with 21.60 Cum 6000.00 #VALUE!
hard stone of approved quality in foundation and plinth including leveling up with cement
concrete 1:6:12 in cement mortar 1:6 (1 cement : 6 sand) in all leads and lifts in
foundation and plinth complete in all respects with in all leads and lifts as per direction of
Engineer in charge.

76 Square rubble masonry / Polygonal rubble masonry with hard stone of approved quality 21.60 Cum 7200.00 #VALUE!
in foundation and plinth in cement mortar 1:6 (1 cement : 6 sand) in all leads and lifts in
foundation and plinth complete in all respects with in all leads and lifts as per direction of
Engineer in charge.

Total in Figures #VALUE!


Quoted Rate in Words #VALUE!
Please Enable Macros to View BoQ information
Q information

You might also like