Professional Documents
Culture Documents
0L Diesel
PCM
/ACCEL switches at the same time, twice
If voltage is below spec, refer to PCM diagnostics. If reading is below or above the amperage spec,
If no rpm is noted, check DTCs. perform Test 15B for each glow plug in the failed
If ICP pressure is below spec, Go To Test 16. side.
If EOP is below spec, refer to Section 3. If the reading is 0 Amps, perform Test 8 on this
form. For DTC 251, refer to Glow Plug Control
If EGRP is out of range, refer to Performance
Diagnostics. Circuit Test.
DMM*
A0072600