Professional Documents
Culture Documents
NORTH-SOUTH EXPRESSWAY
TECHNICAL DATA
(869311-P)
Email : desana31@gmail.com
TEL: 03-5511 4086 (Hunting Line) FAX: 03-5511 4087
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
CONTENTS
COMPANY SUMMARY
EXECUTIVE SUMMARY
SURUHANJAYA SYARIKAT MALAYSIA
KEMENTERIAN KEWANGAN MALAYSIA
SURUHANJAYA TENAGA
SIRIM IP55 TEST REPORT CERTIFICATE
PERAKUAN PENDAFTARAN CIDB
PUSAT KHIDMAT KONTRAKTOR
PERAKUAN KEKOMPETENAN SEBAGAI
PENJAGA JENTERA
PERAKUAN KEKOMPETENAN SEBAGAI
PENDAWAI
ORGANIZATION CHART
SELECTION CRITERIA COMMERCIAL
PRODUCTION EQUIPMENTS
COMPANY PRODUCTS
TYPE TEST
CUSTOMER REFERENCE
LOCATION MAP
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
COMPANY SUMMARY
COMPANY NAME : KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
EXECUTIVE SUMMARY
EXECUTIVE SUMMARY
Please do not hesitate to call our office at number of Tel No. : 03-5511
4086 Fax No. : 03-5511 4087 for more further verification.
MANAGING DIRECTOR
MOHD. ISA JASA BIN ABDULLAH
(869311-P)
SWITCHBOARD
MECHANICAL TEAM
SWITCHBOARD
ELECTRICAL
TEAM
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
CUSTOM LETTER ( ST )
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
ISO 9001:2015
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SURUHANJAYA SYARIKAT MALAYSIA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
KEMENTERIAN KEWANGAN MALAYSIA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
KEMENTERIAN KEWANGAN MALAYSIA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
KEMENTERIAN KEWANGAN MALAYSIA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SURUHANJAYA TENAGA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SURUHANJAYA TENAGA –
KONTRAKTOR ELEKTRIK
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
PERAKUAN PENDAFTARAN CIDB
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
LESEN MAJLIS TEMPATAN
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SIRIM IP54 COMPLIANCE
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SIRIM IP54 COMPLIANCE
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SIRIM IP55 COMPLIANCE
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SIRIM IP55 COMPLIANCE
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
PERAKUAN KEKOMPETENAN
SEBAGAI PENJAGA JENTERA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
PERAKUAN KEKOMPETENAN
SEBAGAI PENJAGA JENTERA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
PERAKUAN KEKOMPETENAN
SEBAGAI PENDAWAI
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
SELECTION CRITERIA
COMMERCIAL
• ACCURACY OF QUOTATION
• QUANTITIES
• PAYMENT TERMS
(869311-P)
COMPANY PRODUCTS
(869311-P)
COMPANY PRODUCTS
(869311-P)
COMPANY PRODUCTS
SYNCHRONIZING PANEL
LYNAS PROJECT
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
COMPANY PRODUCTS
500KW
GENERATOR
SYNCHRONISING
CONTROL PANEL
LAEM CHABANG,
THAILAND
500KW
GENERATOR
SNCHRONISING
CONTROL
PANEL
BAKUN
PROJECT
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
COMPANY PRODUCTS
SUB SWITCHBOARD
FOR IBM DATA CENTRE
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
COMPANY PRODUCTS
(869311-P)
COMPANY PRODUCTS
PROJECT
TAMACO PALM OIL MILL
(869311-P)
COMPANY PRODUCTS
(869311-P)
COMPANY PRODUCTS
(869311-P)
COMPANY PRODUCTS
SYNCHRONISING PANEL,
MAIN SWITCHBOARD,
CAPACITOR BANK
FOR IKBN DUSUN TUA
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
COMPANY PRODUCTS
1200KVAR INDUCTIVE
LOAD BANK (P.F 0.8)
USE FOR GENERATOR
LOAD TESTING
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
TYPE TEST
(869311-P)
4 INDUCTIVE LOAD BANK 500KVAR VPM POWER SDN BHD 2017 RM 92,538.00
6 SUPPLY, INSTALL & COMISSIONING UTAMAS TEKNIK SDN BHD 2017 RM 15,100.00
1 LOT NIKEL CADMIUM BATTERY
FOR SIRIM BERHAD
9 SUPPLY DB’S AND AIR COND PANEL SYAUQI ENTERPRISE 2017 RM 145,000.00
FOR TM PROJECT
(869311-P)
2 REPLACEMENT OF 415V MCC PANEL PNSB WATER SDN BHD 2017 RM 170,600.00
NO 1 & CABLING WORKS FOR
PUMPING STATION AT SG RANGKAP
& SG BATU WTP
3 REPLACEMENT OF MAIN TELEKOM MALAYSIA BERHAD 2017 RM 535,000.00
SWITCHBOARD AT EXCHANGE TM
PEKAN NENAS, FELDA WA HA, SG
RENGIT, PARIT BAKAR, BUKIT
PASIR, KG BARU LENGAN AND
BULOH KASAP
4 PROJECT : HOSPITAL PORT DICKSON VPM POWER SDN BHD 2018 RM 162,000.00
& KULAI , 2 x 400KVA AUTO SYN.
CONTROL PANEL c/w BY-PASS
SYSTEM.
KEJURUTERAAN ELEKTRIK DELTA SAUJANA SDN. BHD.
(869311-P)
4 SUPLLY AND INSTALL 400A AMF MAHKOTA TECHNOLOGIES SDN 2018 RM 13,600.00
BOARD C/W 400A AUTOMATIC BHD
CHANGEOVER PANEL ( FLOOR
STANDING TYPE )
(869311-P)
4 SUPPLY DISTRIBUTION BOARD FOR C & P BUILDER SDN BHD 2019 RM 269,800.00
PROJECT RAMLY FOOD AT PULAU
INDAH
(869311-P)
LOCATION MAP
Compact ATS
Compact without compromise
-—
ABB Compact ATS
Compact without compromise
The new Compact ATS by ABB is just that – It’s a compact, economical and
innovative all-in-one solution that delivers all the safety and performance
you would expect from a product supplying your most valuable assets. An
automatic transfer switch does not need to be complex and difficult to use.
Compared to conventional solutions, the ABB Compact ATS offers 100%
easier and simpler operation in a 40% more compact package.
—
ABB Compact ATS
Compact without compromise
Affordable range
Affordability has been one of the key objectives
for this device. The available functionalities have
been carefully selected to meet market
requirements without added niche features that
would elevate price. It is simple, reliable and
functional.
Accurate communication
The in-built IO signals enable you to control your
system conveniently. The remote test signal
allows you to pre-test and maintain your ATS at
any time.
Modbus RTU communication is available for
Compact ATS adjustable versions. With Compact
ATS, you are ready for connectivity now and in the
future.
4 A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E
A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E 5
—
Ordering information
OTM_C_D products
OTM_C20D
For Network/Network application
—
Fixed version
Number of poles Rated current [A] Rated voltage [V] Voltage sensing Type Ordering code Weight [kg]
2 63 230-220-240 Top in OTM63F2C20D230C 1SCA151421R1001 1.75
2 125 230-220-240 Top in OTM125F2C20D230C 1SCA151417R1001 1.75
3 63 380-400-415 Top in OTM63F3C20D400C 1SCA151423R1001 1.75
3 125 380-400-415 Top in OTM125F3C20D400C 1SCA151419R1001 1.75
4 40 380-400-415 Top in OTM40F4C20D400C 1SCA151252R1001 2.00
4 63 380-400-415 Top in OTM63F4C20D400C 1SCA151254R1001 2.00
4 125 380-400-415 Top in OTM125F4C20D400C 1SCA151250R1001 2.00
OTM_C21D
For Network/Network and Network/Genset applica-
tions
—
Adjustable version
Number of poles Rated current [A] Rated voltage [V] Voltage sensing Type Ordering code Weight [kg]
2 63 230-220-240 Top in OTM63F2C21D230C 1SCA151422R1001 1.75
2 125 230-220-240 Top in OTM125F2C21D230C 1SCA151418R1001 1.75
3 63 380-400-415 Top in OTM63F3C21D400C 1SCA151424R1001 1.75
3 125 380-400-415 Top in OTM125F3C21D400C 1SCA151420R1001 1.75
4 40 380-400-415 Top in OTM40F4C21D400C 1SCA151253R1001 2.00
4 63 380-400-415 Top in OTM63F4C21D400C 1SCA151255R1001 2.00
4 125 380-400-415 Top in OTM125F4C21D400C 1SCA151251R1001 2.00
4 40 380-400-415 Bottom in OTM40F4CB21D400C 1SCA150580R1001 2.00
4 63 380-400-415 Bottom in OTM63F4CB21D400C 1SCA150586R1001 2.00
4 125 380-400-415 Bottom in OTM125F4CB21D400C 1SCA150574R1001 2.00
6 A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E
—
Technical features and functionality
Compact ATS
OTM_C20D_ OTM_C21D_
OTM_C_D products overview Fixed version Adjustable version
Features
Single phase (2 poles) 220~240+/-20% 220~240+/-20%
Rated operational voltage Ue Three phase (3 and 4 poles) 380~415+/-20% 380~415+/-20%
Rated frequency 50 / 60 Hz +/- 10%
Voltage sensing precision 5% 3%
Rated impulse withstand voltage, Uimp 6 kV
Overvoltage category III
Pollution degree 3
Protection rating for the front panel IP20
Operating temperature – 20...+ 55 °C
Transportation and storage temperature – 25...+ 70 °C
Altitude Max. 2000m
Humidity With condensation 50% at 40 °C, 90% at 20°C
Humidity Without condensation 50% at 40 °C, 90% at 20°C
Operation Types
Manual operation with handle x x
Local operation with front panel keypad x
Automatic transfer switching equipment (ATSE) x x
Applications
Transfer between two Transformers x x
Transfer between a Transformers and a generator x
Operation modes
Automatic transfer and back-switching operation x x
Automatic transfer and manual back-switching operation x
Source failure detections
No voltage x x
Undervoltage 0.7-0.95 Ue
Overvoltage 1.05-1.3 Ue
Phase missing x x
Voltage unbalance
Invalid frequency
Configuration
By DIP switches x x
By rotary switches x
Two power status display x x
Two switches status display x x
Auto status display x x
Alarm display x x
A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E 7
—
Technical features and functionality
Compact ATS
—
Compact ATS
Easy use and installation
— —
01 Easy manual operation with the 02 DIN- rail mounting
handle in case of emergency
—
03 Base mounting with screws
8 A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E
—
Technical data
Compact automatic transfer switches OTM40...125_
—
Compact automatic transfer switches
Switch size
Data according to IEC 60947-3 OTM40_ OTM63_ OTM125_
Rated insulation voltage and rated Pollution
operational voltage AC20/DC20 degree 3 V 750 750 750
Dielectric strength 50 Hz 1min. kV 6 6 6
Rated impulse withstand voltage kV 8 8 8
Rated thermal current and rated / ambient 40°C In open air A 40 63 125
operational current AC20/DC20
/ ambient 40°C In enclosure A 40 63 125
/ ambient 60°C In enclosure A 32 50 100
..with minimum conductor cross section Cu mm2 10 16 50
Rated operational current, AC-21A up to 500 V A 40 63 125
690 V A 40 63 125
Rated operational current, AC-22A up to 500 V A 40 63 125
690 V A 40 63 125
Rated operational current, AC-23A up to 415 V A 40 63 90
500 V A 40 60 70
690 V A 40 40 50
Rated operational current / poles in series, DC-21A up to 48 V A 40/1 63/1 125/1
110 V A 40/2 63/2 125/2
220 V A 40/4 63/4 125/4
Rated operational current / poles in series, DC-22A up to 48 V A 40/1 63/1 125/1
110 V A 40/2 63/2 125/2
220 V A 40/4 63/4 80/4
Rated operational current / poles in series, DC-23A up to 48 V A 40/1 63/1 125/1
110 V A 40/2 63/2 125/2
220 V A 40/4 63/4 63/4
Rated operational power, AC-23A1) 230 V kW 7.5 15 22
The kW-ratings are accurate for 3-phase 400 V kW 18.5 30 45
1500 R.P.M. standard asychronous motors
415 V kW 18.5 30 45
500 V kW 22 37 45
690 V kW 37 37 45
Rated breaking capacity in category AC-23 up to 415 V A 320 504 720
500 V A 320 480 560
690 V A 320 320 400
Rated conditional short-circuit current Ip Ip (r.m.s.) 50 kA, 415 V îc (peak) kA 16.5 16.5 16.5
(r.m.s.) and corresponding max. allowed
Max. OFA_ fuse size gG/aM A/A 125/125 125/125 125/125
cut-off current îc (peak) value.
Ip (r.m.s.) 18 kA, 690 V îc (peak) kA 11 11 11
The cut-off current îc refers to values Max. OFA_ fuse size gG A 125 125 125
listed by fuse manufacturers (single
phase test acc. to IEC60269). Ip (r.m.s.) 50 kA, 690 V îc (peak) kA 10 10 10
Max. OFA_ fuse size gG/aM A/A 63/63 63/63 63/63
Rated short-time withstand current Icw (r.m.s.) 690 V 1s kA 2.5 2.5 2.5
Rated short-time making capacity2) Icm (peak) 690 V kA 3.6 3.6 3.6
Power loss / pole With rated current W 1.6 2.8 6.3
Mechanical endurance Number of oper. cycles3) Cycles 10 000 10 000 10 000
Cable size Cu-wire size suitable for mm2 10-70 10-70 10-70
terminal clamps
AWG 8-00 8-00 8-00
Terminal tightening torque Counter torque required Nm 6 6 6
—
Technical data
Compact automatic transfer switches OTM40...125_
—
Compact automatic transfer switches
Switch size
Data according to IEC 60947-6-1 OTM40_ OTM63_ OTM125_
Class of equipment PC PC PC
Rated short-time withstand current Icw (r.m.s.) 690 V 0.1s kA 5 5 5
Conditional short-circuit current Icc (r.m.s.) 415 V kA 50 50 50
Corresponding fuse rating gG/aM fuse 415 V A 125 125 125
Rated operational current, AC-31B up to 415 V A 40 63 125
Rated operational current, AC-32B up to 415 V A 40 63 125
Rated operational current, AC-33B up to 415 V A 40 63 80
1)
These values are given for guidance and may vary according to the motor manufacturer
2)
Short circuit duration > 50ms, without fuse protection
3)
Operating cycle: O - I - O - II - O
—
Compact ATS
Dimensional drawings
10 A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E
—
Ordering information
Accessories
OA1G01
OA7G10
Auxiliary contacts
Snap-on mounting to the switch, IP 20, max. 2 blocks/ side. Ith = 16 A, suitable for cable cross
sections max. 2 x 2.5 mm2. Simultaneous action with the main contacts. The type and order-
ing number is for one piece.
—
Ordering information
Accessories
Terminal shrouds
Transparent plastic, snap-on mounting to the switches, IP20. The full shrouding of a 3-pole
change-over switch is achieved with four 3-pole shrouds.*
OZXT6
OMZC_
—
ABB Electrification
www.abb.com
www.abb.com/contacts
> Low Voltage Products and Systems
1SCC308001B0201 21-11
Non-Automatic (switch-disconnector) versions without protection are available in every frame size.
1 Data Measurement
Phase current Phase current I1, I2, I3, IN, Ig and max current
TemPower 2 is equipped with an optional communication Imax are measured and transmitted.
interface unit that allows data exchange with a host PC via Harmonic currents.
a Modbus open network. Data communication includes Line-to-line voltage V12, V23, and V31 are measured.
measurements, fault log, maintenance information. ON/OFF Demand active power Active power demand (over time) and historical
max. power are recorded.
status, settings and control (ON/OFF/RESET) signals.
Accumulated power Accumulated power is measured.
Power factor Circuit power factor is measured.
Frequency Frequency is measured.
Fault log
Note: Above is for type AGR-31 Protection relay.
Cause Whichever trip functions, LTD, STD, INST Type AGR-21 and AGR-22 measure only phase current.
or GF is activated is then transmitted
Fault current The fault current at which the breaker
tripped open is transmitted. Network Interface I/O specifications
Trip pick-up time The trip pick-up time is transmitted. Item Modbus
Transmission standard RS-485
Transmission method Two-wire half-duplex
Maintenance Information Topology Multi-drop bus
Tripping circuit The tripping coil is always monitored for Transmission rate 19.2 kbps max
monitoring disconnection. If the breaker is not open Transmission distance 1.2 km max (at 19.2 kbps)
within approx. 300 ms of a trip signal
Data format Modbus-RTU or ASCII
delivered from the OCR, an alarm signal
is generated. Max number of nodes 1 - 31
Power Monitoring
Host PC
Next page
TR 3 ø750 kVA
Host network
6600/460V Print
Fault cause protection relay status Long time-delay
Short time-delay ACB No.1 ON
Instantaneous I1 729 A
Ground fault V12 455 V
Power factor 95 % Commercial gateway or PLC
Fault current A
Power 546 kW
ACB Tripping time sec. Electric energy 1041 kWh
RS485
ON ON ON OFF ON
Power supply No. 1 Power supply No. 2 Power supply No. 3 Pump Conveyer
Modbus
Up to 31 units can be
connected per system
All these curves are user definable and comply with IEC 60255-3.
Standard transformer and generator protection characteristics are
also available.
Zone interlocking
ACB C
1
Double Opening and Closing coils provides extended
control system redundancy to an ACB. Double coils allow
designers to implement back-up tripping and closing
systems. It provides the end user with ultimate reliability
on critical UPS circuits connected to critical loads.
Earthing Device
External
Relay
Position Switches 1
Interpole Barriers
Shunt Trip Coil Open / Close Counter
Auxiliary Switches
Double Opening/
Closing Coils
Lifter Loader Protection Relay Tropicalisation, Anti-Corrosion, Test Jumper Step Down Mechanical Interlock, Shutter
Checker Cold Climate treatments Transformer Key Interlock, Truck
440V to 220V Castell Interlock
APPEARANCE
1
2 In In In In
1000 I n 2000
AC RATED INSULATION VOLTAGE [U i
RATED OPERATIONAL VOLTAGE [U e
JIS
[I =I
NK
LR, AB,
REVERSE CONNECTED
U ](kV)
CURRENT[ I
a
TYPE b b
AGR protection relays cannot be used for DC. Please contact TERASAKI
Note:
AR320H AR420H AR325S AR325H AR332S AR332H AR440SB AR440S AR440H AR650S AR663S AR663H
1000 I n 2000 400 I n 800 1250 I n 2500 1250 I n 2500 1600 I n 3200 1600 I n 3200 2000 I n 4000 2000 I n 4000 2000 I n 4000 In In 2500 I n 5000
1000 I n 2000 3150 I n 6300
—
—
— — — — — — — — — — — —
— — — — — — — — — — — —
— — — — — — —
— — — — — — —
— — — — — — —
TemPower 2 series ACBs have an extensive range of accessories available, enabling the ACBs to be “custom built” to suit
every application.
1Types of of
Types Mounting
Mounting
This type of ACB consists of a breaker body and a draw-out This type of ACB has no draw-out cradle and is designed to be
cradle. The breaker body can be moved within or removed from directly mounted in the switchboard.
the draw-out cradle that is fixed in the switchboard.
Terminal arrangements
There are four breaker body positions: CONNECTED, TEST, Main Circuit terminals
ISOLATED and WITHDRAWN. The switchboard panel door can Three (3) types of main circuit terminal arrangements are available:
be kept closed in the CONNECTED, TEST and ISOLATED positions vertical terminals, horizontal terminals and front connections.
(“shut-in three positions). Different types of terminal arrangements can be specified for the
2
line and load sides.
Note: The max. rated current [In] may be reduced depending on the main circuit
CONNECTED position terminal arrangement. For more information see page 84.
Both the main and control circuits are connected for normal service.
TEST position
The main circuit is isolated and the control circuits are connected.
This position permits operation tests without the need for opening the
switchboard panel door.
ISOLATED position
Both the main and control circuits are isolated. The switchboard panel
door does not need to be opened.
TEMBREAK 2 MCCBs
SECTION 1
WELCOME TO TEMBREAK 2
EASY SELECTION GUIDE
*250A Frame
TEMBREAK 2 MCCBs
Plug-in MCCB and base Plug-in connection kit, including safety lock
5. MODULAR SIZES
All current ratings up to 630A The compact 125A size
can be supplied in 2 sizes: offers the same features
the 250A and 630A sizes. and performance but with
reduced dimensions and cost.
SECTION 1
TEMBREAK 2 MCCBs
Changeover Pair with Link Interlock Viewed from Below (250A frame)
and Motor Operators
7. DIRECT OPENING
Under the heading “Measures to minimise the risk in the event of failure”,
IEC 60204-1 Safety of Machinery-Electrical Equipment of Machinery
includes the following recommendation:
“-the use of switching devices having positive (or direct) opening operation.”
8. UNSURPASSED FLEXIBILITY
Overload protection is adjustable between 63%
and 100% of the rating.
Short-circuit protection is adjustable on all
thermal magnetic models.
Short-circuit protection settings are suitable
for motor starting on all models, including
the compact 125A frame.
9. CUSTOMISED TRIPPING TIMES
If you require a characteristic which is not available as a preset on
our electronic protection unit, send us the details and we will
program a customised characteristic to suit your application.
(Within certain limits - contact us for details).
TEMBREAK 2 MCCBs
WELCOME TO TEMBREAK 2
SAFETY PLUS
Terasaki have an innovative approach to product design.
Our goal is to develop products which not only meet,
but exceed recognised standards.
We use our knowledge of related applications to improve
circuit breaker designs. For instance, when developing
the Direct Opening Action, we applied ideas from
a machinery safety standard to the design of the
TemBreak 2 switching mechanism.
This proactive development policy confirms our
reputation as Innovators in Protection Technology.
Machine Safety
SECTION 1
TEMBREAK 2 MCCBs
WELCOME TO TEMBREAK 2
SAFETY PLUS
Visual Safety
You can easily see if a breaker is open, closed or tripped. SAFETY+ coloured
indicators boldly display the ON or OFF status. The indicators are fully covered if
a breaker trips, and black is the only visible colour.
This is a unique safety feature. You can identify faulty circuits at a glance.
The toggle position always matches the position of the main contacts.
Touch Safety
The risk of touching live parts has been minimised by design.
These features reduce the risk of touching live parts:
• There are no exposed metal screws on the front face
• No live parts are exposed when fitting accessories
• Double Insulation
TEMBREAK 2 MCCBs
WELCOME TO TEMBREAK 2
EXCEEDING STANDARDS
Safety Plus
TemBreak 2 MCCBs exceed the requirements of recognised
standards.
International Compliance
• The TemBreak 2 MCCB complies with the international
standard IEC 60947-2
• TemBreak 2 Switch Disconnectors comply with
IEC 60947-3
• Accessories comply with IEC 60947-5-1 or IEC 61058-1
• The entire range conforms to the IEC general rules
for switchgear, IEC 60947-1
• TemBreak 2 MCCBs comply with JIS C 8201-2-1 Ann.1
• The TemBreak 2 range complies with the EC Low
Voltage Directive and all models are CE marked
• TemBreak 2 MCCBs carry the IEC symbol indicating
Direct Opening Action as defined by IEC 60947-5-1.
IEC 60204-1, Safety of Machinery - Electrical
Equipment of Machines recommends that switches
used for machinery have Direct Opening Action to
minimise risk in the event of failure
Independent Tests
TemBreak 2 circuit breakers have been tested at independent
laboratories as well as in Terasaki's own laboratory in
Osaka, Japan. Copies of independent test reports are available
on request.
Marine Approvals
TemBreak 2 MCCBs are approved by the leading marine
approval organisations.
SECTION 1
TEMBREAK 2 MCCBs
WELCOME TO TEMBREAK 2
REDUCING ENVIRONMENTAL IMPACT
Longer Life Cycle
It makes good environmental sense to install a product
with a long life expectancy. If you install a TemBreak 2
MCCB, you can expect it to stay in service for at least
30,000 mechanical operations (250A Frame). This is
1 22,000 more operations than recommended by
IEC 60947-2, the international standard for circuit breakers.
If a system must be upgraded in future, we have made
the following provisions for recycling:
1 The modular design of TemBreak 2 allows component
parts and accessories to be easily disassembled and
separately disposed of. Moulded parts do not contain any
embedded metal parts.
2 Materials are clearly marked to allow future identification
for easy recycling.
ISO 14001
Terasaki operate an Environmental Management System accredited to ISO 14001:1999. This requires us to monitor
and measure the environmental performance of our activities, products and services in order to continually improve
such performance.
Further information about this standard can be found on the internet at: www.tc207.org
Locking
Pegs
TEMBREAK 2 MCCBs
SECTION 2
TEMBREAK 2
MOULDED CASE CIRCUIT BREAKERS
16A TO 630A
1. Welcome to TemBreak 2
2. Ratings and Specifications
• MCCBs 15
• Switch-Disconnectors 19
3. Operating Characteristics
4. Application Data
5. Accessories
6. Installation
7. Dimensions
TEMBREAK 2 MCCBs
Protection
Adjustable thermal, adjustable magnetic
Fixed thermal, fixed magnetic
Microprocessor
Utilisation category A A
Installation
Front connection (FC)
Attached flat bar (FB) • •
Solderless terminal (cable clamp) (FW) • •
Rear connection (RC) • -
Plug-in (PM) • -
Draw- out (DR) - -
DIN rail mounting (DA) • •
Dimensions h (mm) 155 155
w (mm) 3 pole, (1 pole) 90 (30)
4 pole 120
d (mm) 68 68
Weight W (kg) 3 pole, (1 pole) 1.1 (0.45)
4 pole 1.4
Operation
Direct Opening Action
Toggle operation
Variable depth / direct mount operating handle (HB/HP) • -
Motor operator (MC) • -
TEMBREAK 2 MCCBs
SECTION 2
160
S125 S125 H125 L125 S160 S160 S160 H160 L160
3, 4 3,4 3, 4 3, 4 1 3, 4 3, 4 3, 4 3, 4
NJ GJ NJ NJ NF NJ GJ NJ NJ
22 25 45 65 - 22 (18*) 25 45 65
50 85 150 200 25 65 (42*) 85 150 200
A A A A A A A A A
• • • • • • • • •
• • • • • • • • •
• • • • - • • • •
• • • • - • • • •
- - - - - - - - -
• • - - - - - - -
155 155 165 165 165 165 165 165 165
90 90 105 105 (35) 105 105 105 105
120 120 140 140 - 140 140 140 140
68 68 103 103 68 68 68 103 103
1.1 1.1 2.4 2.4 (0.5) 1.5 1.5 2.5 2.5
1.4 1.4 3.2 3.2 1.9 1.9 3.3 3.3
• • • • - • • • •
• • • • - • • • •
30,000 20,000
30,000 20,000 30,000
*Applies only to 20A and 32A models Beyond the Standard™ page 15
Innovators in Protection Technology
TEMBREAK 2 MCCBs
Electrical characteristics
Rated operational voltage Ue (V) AC 50/60 Hz 500 690 690
DC 500 600 600
Rated insulation voltage Ui (V) 800 800 800
Rated impulse withstand voltage Uimp (kV) 8 8 8
Protection
Adjustable thermal, adjustable magnetic
Fixed thermal, fixed magnetic
Microprocessor
Utilisation category A A A
Installation
Front connection (FC)
Attached flat bar (FB) • • •
Solderless terminal (cable clamp) (FW) • • •
Rear connection (RC) • • •
Plug-in (PM) • • •
Draw- out (DR) - - -
DIN rail mounting (DA) - - -
Dimensions h (mm) 165 165 165
w (mm) 3 pole 105 105 105
(mm) 4 pole 140 140 140
d (mm) 68 68 68
Weight W (kg) 3 pole 1.5 1.5 1.5
4 pole 1.9 1.9 1.9
Operation
Direct Opening Action
Toggle operation
Variable depth / direct mount operating handle (HB/HP) • • •
Motor operator (MC)
Endurance Electrical cycles 415V AC
Mechanical cycles
TEMBREAK 2 MCCBs
SECTION 2
400 630
S250 H250 H250 L250 E400 S400 S400 S400 S400 S400 H400 H400 L400 L400 E630 S630 S630 >630
3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3,4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3,4 3, 4 3, 4
PE NJ NE NJ NJ CJ NJ NE GJ GE NJ NE NJ NE NE CE GE
250, 160, 250, 160, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 630 630 630
125 250 125 250 400 400 400 400 400 400 400 400 400 400
690 690 690 690 500 690 690 690 690 690 690 690 690 690 690* 690* 690*
TURN TO PAGE 143, SECTION 9, FOR RATINGS AND SPECIFICATIONS OF MCCBs FROM 630A TO 1600A
- 600 - 600 500 600 600 - 600 - 600 - 600 - - - -
800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
35 45 45 65 15 22 25 25 30 30 45 45 65 65 15 25 30
125 150 150 200 35 50 85 85 100 100 150 150 200 200 50 85 100
- - - - - - - 5 - 5 - 5 - 5 - - -
A A A A A A A B A B A B A B A A A
• • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • - - -
• • • • • • • • • • • • • • • • •
• † † † • • • • • • • • • •
- - - - • • • • • • • • • • - - -
- - - - - - - - - - - - - - - - -
165 165 165 165 260 260 260 260 260 260 260 260 260 260 260 260 260
105 105 105 105 140 140 140 140 140 140 140 140 140 140 140 140 140
140 140 140 140 185 185 185 185 185 185 185 185 185 185 185 185 185
103 103 103 103 103 103 103 103 103 103 140 140 140 140 103 103 103
2.5 2.4 2.5 2.4 4.2 4.2 4.2 4.3 4.2 4.3 7.0 7.1 7.0 7.1 5.0 5.0 5.0
3.3 3.2 3.3 3.2 5.6 5.6 5.6 5.7 5.6 5.7 9.3 9.4 9.3 9.4 6.5 6.5 6.5
• • • • • • • • • • • • • • • • •
10,000 4,500 4,500
30,000 15,000 15,000
TEMBREAK 2 MCCBs
Electrical characteristics
Rated operational voltage Ue (V) AC 50/60 Hz 690 690 690
DC 600 600 600
Rated insulation voltage Ui (V) 800 800 800
Rated impulse withstand voltage Uimp (kV) 8 8 8
TEMBREAK 2 MCCBs
SECTION 2
400 630
S400 S630
3,4 3,4
NN NN
400 630
690 690
600 600
800 800
8 8
9 9
5 5
AC-23A AC-23A
DC-22A DC-22A
• •
• •
• •
•
- -
- -
260 260
140 140
185 185
103 103
4.2 4.4
5.6 5.8
• •
• •
4,500 4,500
15,000 15,000
NX1000A
Features
• Microprocessor based numerical relay
• Current measurement based on fundamental
frequency
• Three-phase, low-set overcurrent
• Three-phase, high-set overcurrent
• Low-set earth-fault
• High-set earth-fault
•
•
• Local display of measured and set values
• Programmable relay outputs
•
•
• Complies with IEC 60255 standard
• ANSI Code : 50P, 50N, 51P, 51N
Technical Data
RATINGS SETTING RANGES INDICATORS
Rated current ( In ) :5 A I RCURRENT ELEMENT Auxiliary supply : Green indicator
Rated frequency : 50 or 60 Hz Low-set ( I> ) : 0.1 A to 10.0 A Pick-up : Red indicator
Burden : < 0.3 VA at In (2% to 200%) Trip : 7-segment display
Themal withstand : 4 x In : 0.01 to 1.0 and Red indicators
AUXILIARY SUPPLY : 0.00 sec to 100 sec
Model NX1000A-240A : 198 ~ 265 V AC High-set ( I>> ) : 0.5 A to 100 A
Model NX1000A-240AD : 85 ~ 265 V AC (10% to 2000%) ENVIRONMENTAL CONDITIONS
110 ~ 340 V DC or disable Temperature : -10˚C to +55˚C
Model MK1000A-150D : 24 ~ 150 V DC : 0.00 sec to 100 sec Humidity : 5% to 95%,
Supply frequency : 50 or 60 Hz non-condensing
: 3 VA typical
II EART FAULT ELEMENT
ACCURACY Low-set ( Io> ) : 0.10 A to 5.0 A,
: ± 5% (2% to 100%) MECHANICAL
Time delay : ± 5% with a o>) : 0.01 to 1.0 :
minimum of 50 ms o> ) : 0.00 sec to 100 sec Dimension (mm) : 96(w) x 96(h) x 110(d)
High-set ( Io>> ) : 0.10 A to 50 A : IP54 at the panel
OUTPUT CONTACTS (2% to 1000%) Approximate weight : 0.8 kg
Trip Contacts ( R1 & R2 ) or disable
Rated voltage : 250V AC / DC o>> ) : 0.00 sec to 100 sec
:5A
Expected electrical life (0.00 to 1.00, step 0.01; 1.00 to 10.0, step 0.10;
at rated current 10.0 to 100, step 0.5)
Expected mechanical life : 5 x 106
NX 1000A
Combined Overcurrent & Earth Fault Relay
www.itmikro.com
96 mm
Front
110 mm
100 mm
Side
91.0 ± 0.5 mm
91.0 ± 0.5 mm
Panel Cutout
Ordering Information
MODEL DESCRIPTION
NX1000A-240A For 50/60 Hz system, auxiliary voltage 198 ~ 265 V AC
NX1000A-240AD For 50/60 Hz system, auxiliary voltage 85 ~ 265 V AC or 110~340 V DC
NX1000A-150D For 50/60Hz system, auxiliary voltage 24 ~ 150 V DC
NX 1000A
APPROVAL
TECHNICAL SPECIFICATIONS
HM-C HM-1
45
Power Factor Regulator
PFR140
PFR120
PFR80
PFR60
Features
• Microprocessor based intelligent auto switching
control
• Programmable sensitivity
• User-friendly setting
Technical Data
RATINGS AUXILIARY POWER SUPPLY CURRENT INPUT ENVIRONMENTAL CONDITIONS
Current Supply voltage : 220~240 V AC / Rated current ( In ) :5A Temperature : -5˚C to +55˚C
380~415 V AC Operating Limits : 0.05 A to 6.5 A Humidity : 56 days at 93% RH and
Operating Limits : -15% + 10% Rated Frequency : 50 Hz or 60 Hz 40˚C non-condensing
Consumption : 10 VA max
PFR 140 / 120 / 80 / 60
Rated frequency : 50 Hz or 60 Hz
CONTROL RANGE MECHANICAL
Power factor setting : 0.8 Ind - 0.8 Cap Mounting : Panel mounting
OUTPUT CONTACTS C/K setting : 0.03 - 1.20 / Automatic Dimension (mm) : 144(w) x 144(h) x 90(d)
Numbers of outputs : 6 / 8 / 12 / 14 ( PFR60 Switching sensitivity : 5 - 600 s/step Enclosure protection : IP54 at the panel
/ PFR80 / PFR120 / Reconnection time for Approximate weight : 1.2 kg
PFR140 ) same step : 5 - 240 s
Rated voltage : 250 V AC THD threshold : 0.20 - 3.00 ( 20% - 300% ) /
Contact rating : 5A OFF
Expected electrical life : 100,000 operations at Switching Program : Automatic / Automatic
rated current Rotate / 4-quadrant /
Expected mechanical life : 5 x 106 operations Manual
Max current for the Rated step coefficient : 0 / 1 / 2 / 3 / 4 / 5 / 6 / 8 /
common terminals : 12 A continuous 12 / 16
( Automatic if C/K set to
Auto )
Power Factor Regulator
MAIN
N L3 L2 L1
13 13
220~240 V AC
AUX AUX
380~415 V AC
VOLTAGE 1 VOLTAGE
14 14
2
K14 K13 K2 K1
LOAD
MODEL DESCRIPTION
PFR60 - 415 - 50 6 Steps, 50 Hz system, auxiliary voltage 380~415 V AC
144 mm
Panel
Cutout
Low Voltage Switches
Switches
Switch fuses
OS32...160 A Gamma series
Switch fuses for extreme conditions
- OS 32…160 Gamma series
Superior performance
- High U i ratings
- High CTI in supporting parts
- The contact constructions are optimal, regardless of fuse
type, DIN, BS, NFC or UL-type
- Meets the requirements for installation close to the main
transformer up to 100 kA in heavy industry and in ships
Compact construction
- Intelligent construction in combination with a small number
of components results in a very compact mechanism
design
- Very small footprint area
OS OS OS OS OS OS
Switch size A 32 50 63 100 125 160
Rated insulation voltage Pollution degree 3 V 1 000 1 000 1 000 1 000 1 000 1 000
Dielectric strength 50 Hz 1min. kV 10 10 10 10 10 10
Rated thermal current in ambient 40 °C 2)
/ In open air A/W 32/7.5 50/7.5 63/7.5 100/12 125/12 160/12
max. fuse power dissipation 1) In enclosure A/W 32/7.5 50/7.5 63/7.5 100/12 125/12 160/12
...with minimum cable cross section Cu mm 2 6 10 16 50 50 70
Rated operational voltage AC-20 and DC-20 V 1 000 1 000 1 000 1 000 1 000 1 000
Rated operational current, AC-21, AC-22 and AC 23 A 32 50 63 100 125 160
Rated operational current / poles in series DC-21A 48 V A 32/2 50/2 63/2 100/2 125/2 160/2
110-220 V A 32/2* 50/2* 63/2* 100/2* 125/2* 125/2*
440 V A 32/4* 50/4* 50/4* 100/4* 125/4* 125/4*
Rated operational current / poles in series DC-22A 48 V A 32/2 50/2 63/2 100/2 125/2 160/2
110-220 V A 32/2* 50/2* 63/2* 100/2* 125/2* 125/2*
Rated operational current / poles in series DC-23A 48 V A 32/2 50/2 63/2 100/2 125/2 160/2
110-220 V A 32/2* 50/2* 63/2* 100/2* 125/2* 125/2*
Rated operational power, AC-23 4) 230 V kW 7.5 11 18.5 30 37 45
The kW-ratings are accurate 400 V kW 15 22 30 55 55 75
for three-phase 1500 R.P.M. 415 V kW 15 22 30 55 55 75
standard asynchronous motors. 500 V kW 18.5 30 37 55 75 90
690 V kW 22 37 55 90 110 132
Rated breaking capacity in category AC-23 up to 690 V A 504 504 504 1 280 1280 1280
Rated breaking capacity / poles in series in category DC-23 up to 220 V A 252/2 252/2 252/2 640/2 640/2 640/2
Rated conditional short-circuit current I p (r.m.s.) 80 kA, 415 V kA 13.5 13.5 13.5 23.5 23.5 23.5
I p (r.m.s.) and corresponding max. allowed Fuse size gG/aM A 80/63 80/63 80/63 160/160 160/160 160/160
cut-off current î c Ip (r.m.s.) 100 kA, 500 V kA 12.5 12.5 12.5 25.5 25.5 25.5
Fuse size gG/aM A 63/63 63/63 63/63 160/160 160/160 160/160
I p (r.m.s.) 80 kA, 690 V kA 11.5 11.5 11.5 20.5 20.5 20.5
Fuse size gG/aM A 63/63 63/63 63/63 125/160 125/160 125/160
Rated short-time withstand current, 1s r.m.s. -value kA 2.5 2.5 2.5 5 5 5
Rated capacitor power 5)
400/415/690 V A 15/15/25 20/25/42 25/32/50 40/42/75 50/55/90 60/65/100
Rated op. Rated op. Fuse Number Type Order number Units/ Weight/
F
F
A04172
F
F
O OF F
OS32G_...63G_ include protected tunnel terminals (IP20) and OS125G...160G include a terminal bolt kit.
OS32G_...63GDS30 Rated op. Rated op. Fuse Number Type Order number Units/ Weight/
current power size of type unit
AC-20...23 AC-23 poles [pcs] [kg]
≤ 690V 400/500/690V
[A] [kW]
Rated op. Rated op. Fuse Number Type Order number Units/ Weight/
F
F
A04172
F
F
O OF F
OS32G_...63GBS30
Side operated switch fuses without handle and shaft
OS32G_...63G_ include protected tunnel terminals (IP20) and OS100G...160G include a terminal bolt kit.
Rated op. Rated op. Fuse Number Type Order number Units/ Weight/
current power size of type unit
AC-20...23 AC-23 poles [pcs] [kg]
≤ 690V 400/500/690V
[A] [kW]
O
F
Rated op. Rated op. Fuse Number Type Order number Units/ Weight/
F
A04172
O OF F
F
F
A04173
Rated op. Rated op. Fuse Number Type Order number Units/ Weight/
current power size of type unit
S07014
≤ 690V 400/500/690V
[A] [kW]
OS50GFS30
50 22/30/37 14x51 3 OS50GFS30 1SCA116050R1001 1 1.3
50 22/30/37 14x51 4 OS50GFS40N1 1SCA116058R1001 1 1.6
50 22/30/37 14x51 4 OS50GFS40F 1SCA116014R1001 1 1.6
125 55/75/110 22x58 3 OS125GFS30 1SCA115973R1001 1 1.5
125 55/75/110 22x58 4 OS125GFS40N1 1SCA115974R1001 1 1.8
125 55/75/110 22x58 4 OS125GFS40F 1SCA115975R1001 1 1.8
Suitable for switches Included shaft Included handle Included terminal bolts
OS125GFS30
OS50G_ OXP6X161 OHB45J6
OS125G_ OXP6X161 OHB65J6 M8x25
O
F
Ampere Horse power Fuse Number Type Order number Units/ Weight/
F
A04172
O OF F
ON
Mechanism at the end of the switch fuse
60 15/30/50 J, 60A 3 OS60GJ03P 1SCA115443R1001 1 1.3
NO
I
O
A04173
F
F
O OF F
OS100G_03P
Side operated switch fuses without handle and shaft
OS60G_ include protected tunnel terminals (IP20) and OS100G include a terminal bolt kit.
Ampere Horse power Fuse Number Type Order number Units/ Weight/
rating ratings size of type unit
[A] 3-phase poles [pcs] [kg]
240/480/600V
[HP]
OS100GJS30
Optional handles, IP 65
For front operated switch fuses
Padlockable with 3 padlocks in the OFF-position, door interlock in the ON-position. Units/type = 1 pcs.
S00601A
Screw fixing from the back side of the handle, no screws on the front, ensures double insulation.
Extended shafts
S00050A
Units/type = 1 piece
Shaft Front Side Type Order number Delivery Weight
length operated operated batch /unit
OXP6X_ [mm] H / [mm] H / [mm] [pcs] [kg]
For OS 32...632), shaft diameter 6 mm
63 161...167 OXP6X63 1SCA111010R1001 10 0.02
90 188...194 OXP6X90 1SCA022064R1180 10 0.03
130 127...174 228...234
3)
OXP6X130 1SCA022057R0570 10 0.04
161 138...205 OXP6X1611) 1SCA022067R1760 10 0.05
210 187...254 OXP6X210 1SCA022295R6080 10 0.06
290 267...334 OXP6X290 1SCA022042R6370 10 0.08
360 337...404 OXP6X360 1SCA022042R6530 10 0.10
430 407...474 OXP6X430 1SCA022056R6030 10 0.12
Fourth poles
Snap-on mounting to the left or right side of the switch.
Suitable for Number Description Type Order number Units/ Weight
3-pole of type
switches poles [pcs] [kg]
S04129
Fusible 4. poles
S04129
1)
Included as standard 3)
OS32...63GB/GF: 115...174
OA_G 2)
Side operated, 4-pole: OS 32...63: add 45 mm, 4)
OS100GJ: 113...174, OS100GB...160GB: 121...174
OS 100...160: add 35 mm
OS32...63G_
mm 47,5
in 1,87
17,5 E 138...205 (OXP 6x161) 45 10
0,39
0,69 5,43...8,07 1,77
57/2,24 114 ON
OFF
6 100/3,94 4,49 O
T
0,24
ON
112/4,41
OFF
O
T
100/3,94 45/1,77 A1
25
D C 14 min 0,98
M5
3/16 0,55
A B
84
ON
OFF
8 3,31
O
T
0,31
29 OS32-63GD OS32-63GB/F OS60GJ
1,14
M00287/OS32-63G_01-04 A
mm mm mm / in B1
D01 D02 D03 D04 B/F01 B/F02 B/F03 B/F04 J01 J02 J03 J04
7
0,28 A 64,5 88 111,5 135,5 64,5 88 111,5 135,5 74,5/2,93 109,5/4,31 144,5/5,69 179,5/7,07
B 120,5 120,5 120,5 120,5 108,5 108,5 108,5 108,5 118/4,65 118/4,65 118/4,65 118/4,65
C - 23,5 23,5 23,5 - 23,5 23,5 23,5 - 35/1,38 35/1,38 35/1,38
D 40 40 40 40 40 40 40 40 45,5/1,79 45,5/1,79 45,5/1,79 45,5/1,79
E 30 30 30 30 30 30 30 30 36/1,41 36/1,41 36/1,41 36/1,41
A1 45 68,5 92 111,5 45 68,5 92 111,5 51/2,01 86/3,39 121/4,76 156/6,14
B1 75 98,5 122 145,5 75 98,5 122 145,5 81/3,19 116/4,57 151/5,94 186/7,32
ON
I
114
OFF
O
T
100/3,94
ON
I 112
OFF
O
4,41
T
A1
45/1,77
B2
D 14 min
M5 H C 0,35
3/16
ON
B 84
I
OFF
A
O
T
B 120,5 120,5 120,5 120,5 108,5 108,5 108,5 108,5 118/4,65 118/4,65 118/4,65 118/4,65
C - 23,5 23,5 23,5 - 23,5 23,5 23,5
M00288/OS32-63G_11-22
OS32...63G_S
mm M5 53 E
in 3/16 2,08 26,5
1,04
57
2,24
114
100 112 100 4,49
3,94 4,41 3,94
Shaft depth A1
Min 23/0,91
Max 27/1,06
41,5
D C 36,5 65 1,63
1,44 2,56
A (OS30-63G_S_)
F (OS30_63G_S_K) B 84
3,31
8
0,31
41
1,61 OS32-63G_ mm OS60G_ mm/ in B1
M00296/OS30_63G_01_04S A
7 DS01 DS02 DS03 DS04 B/FS01 B/FS02 B/FS03 B/FS04 JS01 JS02 JS03 JS04
0,28 A 99,5 123 146,5 170 99,5 123 146,5 170 109,5/4,31 144,5/5,69 179,5/7,07 214,5/8,44
B 132,5 132,5 132,5 132,5 120,5 120,5 120,5 120,5 130/5,12 130/5,12 130/5,12 130/5,12
C - 23,5 23,5 23,5 - 23,5 23,5 23,5 - 35/1,38 35/1,38 35/1,38
D 56,5 56,5 56,5 56,5 56,5 56,5 56,5 56,5 62/2,44 62/2,44 62/2,44 62/2,44
E 30 30 30 30 30 30 30 30 36/1,41 36/1,41 36/1,41 36/1,41
F 116,5 140 163,5 187 116,5 140 163,5 187 126,5/4,98 161,5/6,36 196,5/7,74 231,5/9,11
A1 61,5 85 108,5 132 61,5 85 108,5 132 67,5/2,66 102,5/4,04 137,5/5,41 172,5/6,79
B1 91,5 115 138,5 162,5 91,5 115 138,5 162,5 37,5/1,48 72,5/2,85 107,5/4,23 142,5/5,61
OS100...160G_
138...205 (OXP 6x161) 10
33,4 81
20
ON
OFF
O
T
17,5
ON 6 C
114,5
OFF
O
T
ON
110
OFF
O
140 65
T
M5
B1
14 min
46 35
B 25
M00289/OS100-160G_01-04 A
A OS100-160GD/F OS100-160GB
mm mm
D/F01 D/F02 D/F03 D/F04 B01 B02 B03 B04 ON
84
OFF
A 76,5 111,5 146,5 181,5 76,5 111,5 146,5 181,5
O
T
81
95,5 36 20 45
ON
114
OFF
O
T
C
OFF
O
T
65 ON
M5 110
OFF
O
T
14 min
71,5 35 B
B1
D OS100-160GD/F OS100-160GB
mm mm
A D/F11 D/F12 D/F13 D/F22 B11 B12 B13 B22 C2
A 113 148 183 183 113 148 183 183
M00290/OS100-160G_11-22 A
84 O
A2
T
45 45 45 80 45 45 45 80
B1 105 140 175 175 105 140 175 175
B2 52,5 52,5 52,5 87,5 52,5 52,5 52,5 87,5
C1 120 155 190 190 120 155 190 190
C2 60 60 60 95 60 60 60 95 C1
OS100...160G_S
33,4
26,5
93
95,5
88,5 20
50 114
8,5 2,5
43 53
5,5 A1
57
34
140 C
114,5
M5 B1
B
62,5 35
A (OS100-160G_S_) OS100-160G mm 41,5
D/F01 D/F02 D/F03 D/F04 B01 B02 B03 B04
D (OS100-160G_S_K)
A 111,5 146,5 181,5 216,5 111,5 146,5 181,5 216,5
B 142 142 142 142 126,5 126,5 126,5 126,5
C 100 100 100 100 118 118 118 118 84
D 128,5 163,5 198,5 233,5 128,5 163,5 198,5 233,5
A1 71,5 106,5 141,5 176,5 71,5 106,5 141,5 176,5
B1 86,5 121,5 156,5 191,5 86,5 121,5 156,5 191,5
C1
C1 101,5 136,5 171,5 206,5 101,5 136,5 171,5 206,5
OS100GJ_
138...205 (OXP 6x161) 45 A1 B1
53,3/2,10 33,4 10 17,5
1,31 5,35...8,07 1,77 0,39 0,69
mm 17,5 81/3,19
in 0,69 20
8,5 0,79 114 ON
110 ON
69/2,72 4,49
OFF
4,33
OFF
O
O
0,33 60/2,36
T
T
95,5 11
3,76 0,43 2,5
0,10
46
1,81 C1
25
6 0,98
220 36 0,24
8,66 1,42 125,5
ON
4,94
84 ON
OFF
172
OFF
138,5 3,31
O
O T
6,77 5,45
65
2,56
A
38
M5 1,50
M00291/OS100GJ01-04
min 14 OS100GJ
0,55 mm / in mm / in mm / in mm / in
J01 J02 J03 J04
A 76,5/3,01 111,5/4,39 146,5/5,77 181,5/7,15
46 35
1,81 1,38 104,5/4,11 A1 55/2,17 90/3,54 125/4,92 160/6,30
B1 70/2,76 105/4,13 140/5,51 175/6,89
A C1 85/3,35 120/4,72 155/6,10 190/7,48
OFF
20
OFF
O
4,49
T
T
36 0,79
95,5 0,33 1,42 2,36
3,76 11 2,5
0,43 0,10 A1 B1
46 38 C2
4,81 1,50
220 6
8,66 36 0,24 84
125,5
ON
1,42
OFF
3,31
O
T
ON 4,94
172
OFF
O
T 6,77 138,5
5,45 C1
65
2,56 OS100GJ
mm / in mm / in mm / in mm / in
A
The measurements in the dimension drawings are preliminary and may be altered.
OS100GJ_S
33,4 93 26,5 34
3,66 1,04 1,34
1,31
mm
in 50 2,5
20 0,10 110
95,5 88,5 0,79 1,97 114
4,33
4,49
3,76 3,48
53 11
43 2,08 0,43 B1
1,69 A1
41,5
57 220 1,63
2,24 150 8,66
100 125,5
3,94 5,91 4,94
84
172 138,5 3,31
Shaft depth 6,77 5,45
Min 23/0,91
Max 27/1,06
C1
A
M5
M00297/OS100GJS
OS100G_ mm/ in
3/16 Ø8,5
JS01 JS02 JS03 JS04
0,33
62,5 35 A 111,5/4,39 146,5/5,77 181,5/7,15 216,5/8,52
2,46 1,38 116,5 B 128,5/5,06 163,5/6,44 198,5/7,91 233,5/9,19
A (OS100GJS_) 4,59 A1 71,5/2,81 106,5/4,19 141,5/5,57 176,5/6,95
B1 86,5/3,41 121,5/4,78 156,5/6,16 191,5/7,54
C1 101,5/4,00 136,5/5,37 171,5/6,75 206,5/8,13
B (OS100GJS_K )
ABB Oy The technical data and dimensions are valid at the time of
www.abb.com
Capacitor is used to correct Power Factor for 200 Series 205 Series
1 Construction Cylindrical
Motors, Low Voltage Transformers and inside 2 External Terminal Box & Casing Finishing Extruded Aluminum Casing
Industrial Switchboard. It is sometimes used 3
4
Type
Dielectric
Dry, Self-Healing
Bi-Axially Oriented Polypropylene
with blocking reactors with harmonics 5 Plate Zinc-Aluminium Alloy
presence. 6
7
Rated Voltage (UN)
Frequency (fN)
440V
50 / 60 Hz
525V
QN = kVAr ; IN = Amps
QN = kVAr ; IN = Amps
PRODUCT DIMENSION
M10
M8 Stud
OM12
16
.6
2m ±
16 ±1mm Height ± 1mm 22.0 ±1mm
m
M8
OD ±1.0mm
31.5 ± 1.5mm
OD ±1mm
OM12
56 ±1.5mm
PRODUCT DIMENSION
35KVAR
to
40KVAR
1.0KVAR
to
5.0KVAR
ELECTRICAL COMPONENTS SDN BHD
The First Choice in Energy Efficiency
CAPACITOR CONTACTORS
Type CNNK 12 CNNK 20 CNNK 30 CNNK 40 CNNK 50 CNNK 60 CNNK 75
Rated operation current le Amps 18 29 44 58 72 87 108
CNNK 30
CNNK 12 CNNK 20