Professional Documents
Culture Documents
NOTES
1. All Engineer's drawings shall be read in
conjunction with the Architect's drawings. Any
discrepancies should be reported
2700 3000 3000 3000 3000 3000 3000 3000 3000 2700 2. These drawings shall be read in conjunction
with Standard & Particular Specifications.
1350 1350 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1350 1350 5. Concrete shall be of grade C25, medium
slump (75) & maximum aggregate size
20mm.Minimum cement conent 325kg/m3 &
maximum w/c ratio shall be 0.55
6. Cover to reinforcement shall be
50mm-foundations and rc walls,
25mm-columns, 25mm-beams & 25mm-slabs.
RACK DETAILS (SCALE: 1:50)
7. Masonry units shall have a minimum
compressive strength of 2.8N/mm2 and
1.52 mortar designation (ii).
1.6
X
1.52 Position of Triangular Bracings Position of Triangular Bracings Position of Triangular Bracings Position of Triangular Bracings Position of Triangular Bracings Position of Triangular Bracings
8. Ground supported slabs shall be reinforced
with a square mesh A142
1.50 2700 3000 3000 3000 3000 3000 3000 3000 3000 2700 1.6 9. Fill material shall be approved by the
engineer prior to use.
1.51 114.3 x 5mm CHS Horizontal Members 114.3 x 5mm CHS Horizontal Members
Detail 'Q' for Triangular Bracings
114.3 x 5mm CHS Horizontal Members 1.5 10. Approved fill shall be placed and spread in
1.5 layers of 150mm to 250mm,OMC
achieved and compacted to 95% MDD
114.3 x 5mm CHS Existing Vertical Members
1000
(Modified AASHTO)
114.3 x 5mm CHS Members 11. Reinforced concrete design and workmanship
1.05 1500
to BS8110 Pt. 1 & 2
1000 1350 1350 1500
1.08
1500 1500 1500 1500 1500 1500
1.05 Connection
1500 1500 1500 1.05 1500 1500
1.05 1500 1500
1.05 1500 1350
1.08 1350 1000
1.1 1.08 1.05 1.05 1.05
12. Timber shall be of SG grade and to BS 5268.
1.05
'N'
1.1 Connection detail "C"
1.05 1.05 1.08
X
13. Structural steelwork to BS 5950. See
1000
Detail "K" /STR 05 plank for the middle
RC RAMP 114.3 x 5mm CHS Vertical Members
GROUND LEVEL rack.
GROUND LEVEL 002/2 03.10.22 MAY.2022 Provided for a section
TYPICAL SECTION THROUGH INSPECTION FACILITY - 50 mm Oil Interceptors (SCALE: 1:50) /STR 05 through the racks.
Steel column 003/2 07.06.23 MAY.2022 Provided for oil
Steel column
8000 1000 /STR 05 stoppers and
RC step intermediate bracings
RC step T10 DETAIL 'Q' TRIANGULAR BRACINGS FOR THE RACKS (SCALE: 1:25) for the racks.
Detail 'A' Detail 'A' 313
T10 445
RC Ramp
RC Ramp
50
100 x 60mm Timber Plank
100
50
150
T10 dowel steel bar at 150 spacing c/c
150
100 x 100 x 6mm Thick MS Plate
anchored into existing concrete floor @1.5m spacing
T10 dowel steel bar at 150 spacing c/c
1000
175
PLAN LAYOUT OF THE RACK DETAILS (SCALE: 1:50)
SYMBION UGANDA
STUDIO HOUSE
Plot 5, Bandali Rise,Bugolobi.
P.O Box 7671
Tel: +256(41)251142/349065
DETAIL 'N' (SCALE: 1:10) Email: symbionuganda@symbion-
6200 6200 6200 6200
A
int.com
25 150 25
5 4 150 x 50 x 2mm ZED-PURLIN
3 2 1 200 x 200mm RC Capping Beam
CIVIL / STRUCTURAL CONSULTANT
75
18mm Dia Holes To Take 150 x 200 x 10mm Thick Plate ARMSTRONG CONSULTING
150
75 x 75 x 6mm RSA 16mm Dia. Bolts 114.3 x 5mm CHS Members ENGINEERS
WIND BRACING MEMBER
75
Plot 13-14 Kataza Close,
Maria House, 3rd Floor,Bugolobi
200 P.O Box 22409, Kampala, Uganda
Tel: +256-414-505621
CONNECTION DETAIL 'N' (SCALE: 1:10) Email:armstrong@armstrong.co.ug
QUANTITY SURVEYOR
2000
Plot 21 Yusuf Lule Road,
UB 254 x 146 x 31Kg/m EAVES BEAM 200 x 200mm RC Columns at 2m c/c Course View Towers, 3rd Floor,
50 x 50 x 3mm SHS MEMBERS
Kampala, Uganda
50 x 50 x 3mm SHS BOTTOM CHORD 50 x 50 x 3mm SHS BOTTOM CHORD 50 x 50 x 3mm SHS BOTTOM CHORD 50 x 50 x 3mm SHS BOTTOM CHORD Tel:+256(0)392778211
1083 1000 1000 1000 1000 1117 1083 1000 1000 1000 1000 1117 1083 1000 1000 1000 1000 1117 1083 1000 1000 1000 1000 1117 www.turnerandtownsend.com
MULTI-KONSULTS Ltd
175
www.multikonsults.com
30 x 30 x 2mm SHS Vertical 200 x 200mm RC Capping Beam 200 x 200mm RC Capping Beam 200 x 200mm RC Capping Beam 200 x 200mm RC Capping Beam 2000
Members @ 450mm c/c Project status & Sheet Name
3201
200 x 200mm RC Columns at 2m c/c 2m HIGH BLOCK WALL AT EAVES END ELEVATION (SCALE: 1:25)
RACKS DETAILS & SECTION
200
200
Sheet No.
Revision
005 STR 05A
500
305 x 165 x 46 Kg/m
UB Portal Column Job Number
21-307