Professional Documents
Culture Documents
GS EP PVV 000
10 10/2012 Revision
09 01/2012 Revision
08 01/2011 Revision
07 10/2009 Revision
00 01/2005 First issue
Rev. Date Purpose of the revision
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
Contents
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
1. Numbering principle
Piping Valves Vessels (PVV) discipline "General Specifications" are identified as follows:
GS EP PVV XXX: (XXX = 3 digits)
These GS EP are split in 9 main technical topics (plus one related to generalities).
Each topic is identified by the first of the three digits, as follows:
GS EP PVV 0XX: Generalities
GS EP PVV 1XX: Piping and valves
GS EP PVV 2XX: Pressure vessels
GS EP PVV 3XX: Storage tanks
GS EP PVV 4XX: Heat exchangers and air coolers
GS EP PVV 5XX: Heaters, Boilers and Flares
GS EP PVV 6XX: Welding
GS EP PVV 7XX: Thermal Insulation and heat tracing
GS EP PVV 8XX: Skid mounted units
GS EP PVV 9XX: Inspection
As far as possible the following main activities have been treated in separate documents:
• Design
• Fabrication (in the shop)
• Erection (on site).
The two last digits are thus attributed accordingly.
Series X0X Generalities
X1X to X3X Design
X4X to X6X Shop fabrication and material supply
X7X to X9X Site erection
Finally the last digit has no specific meaning although code "XX0" would be in principle
dedicated to generalities related to one specific topic and one specific activity.
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
2.8 Welding
(series: GS EP PVV 6XX)
GS EP PVV 611 Welding of pressure containing piping and equipment
GS EP PVV 612 Piping and equipment subject to Severe Sour Service.
Metallurgical and welding requirements
GS EP PVV 613 Valves materials requirements for use in sour service
GS EP PVV 614 Welding of Duplex and Superduplex stainless steel
GS EP PVV 615 Welding of UNS 31254 alloy
GS EP PVV 616 Welding of titanium pipes and fittings
GS EP PVV 617 Welding of 3 ½% Nickel steel (impact tested at minus 101°C)
GS EP PVV 618 Fabrication of alloy UNS 06625 Grade 1 materials
GS EP PVV 619 Piping or pressure vessel components in Duplex and
Superduplex stainless steel
GS EP PVV 620 Specification for fabrication and welding of piping systems in
cupronickel and associated materials
GS EP PVV 621 Piping components in material 2 ¼ Cr- 1% Mo
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
2.11 Inspection
(series: GS EP PVV 9XX)
GS EP PVV 929 In-service inspection for HIC/SSCC checks on pressure vessels
GS EP PVV 950 Technical Assessment of Pressure Vessels and Heat
Exchangers Manufacturers
GS EP PVV 951 Technical Assessment of Pipes - Fittings Manufacturers
GS EP PVV 952 Technical Assessment of Piping Manufacturers
GS EP PVV 953 Technical Assessment of Valves Manufacturers
GS EP PVV 954 Technical Assessment of Glass-Reinforced Plastics (GRP)
Piping Manufacturers
GS EP PVV 955 Foundry Technical Assessment
GS EP PVV 956 Forging Mill Technical Assessment
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
Appendix 1
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.
General Specification GS EP PVV 000
Appendix 2
This document is the property of TOTAL S.A., it contains confidential information which may not be disclosed to any third party,
reproduced, stored or transmitted without the prior written consent of TOTAL S.A.
The information contained in this document does not substitute to the applicable laws and regulations.