Professional Documents
Culture Documents
NUMBER: MS0019
tools to be removed from use immediately yy Work down the wall, ensuring that all waste
yy Remove and fixtures and fittings from wall is removed from the working area as quickly
yy Remove doors from frames as possible in order to keep the work area
clear and minimise the risk of trips and falls
yy Cut plaster along the edges of the wall to
ensure that any plaster removal does not yy At the lower levels of the walls (below
run onto adjoining walls shoulder height) a breaker/ drill with chisel
attachment may be used to dismantle the
yy Remove paper and plaster from wall,
wall in small chunks
damping down if required, and dispose of
waste to designated area yy All areas to be checked following the
dismantling of the wall for safety and
yy Starting at the top of the wall, use hammer
structural purposes including any adjoining
and bolster/ chisel to dismantle wall in
ceilings, walls and floors
small chunks for easy removal, taking care to
avoid flying debris, damp down if required yy All areas to be thoroughly cleaned
yy Monitor wall as demolition commences for
possible collapse
PPE Required
Hazardous Substances
IRRITANT/ RESPIRATORY
FLAMMABLE
SENSITISER SENSITISER
NO
YES YES
Emergency procedures
First Aid:
yy First Aid box provided on all vehicles
yy Local arrangements for contacting emergency services to be identified
yy Location or nearest hospital A&E must be known
yy In case of serious accident or injury requiring immediate medical attention call 999
yy Always inform supervisor or H&S Manager of all accidents, incidents and near misses
yy Ensure that accident, incident or near miss is logged
Fire:
yy Fire extinguisher on all vehicles
yy Only attempt to extinguisher f safe to do so
yy Local arrangements for contacting emergency services to be identified
yy Maintain adequate emergency access route in working location at all times