Professional Documents
Culture Documents
S
HI-SHEAR Corporation, USA Design Holder CAGE No. 73197
AEROSPACE
a LISI AEROSPACE Company
For the current list of licensed manufacturers, please visit the
hi-shear corporation
LISI AEROSPACE website at:
2600 SKYPARK DRIVE, TORRANCE, CALIFORNIA 90509 U.S.A. HTTP://WWW.LISI-AEROSPACE.COM/LICENSES
19
HL
101 A Y 100
99 DIA DIA 90
8
h
s
D TD
Z 9 DIA
DIA THREAD ROLLED PER AS8879 COLLAR WRENCHING
H (MODIFIED). MAJOR DIA SHALL DEVICE AUTOMATICALLY
BE PER "TD" SHEARS OFF
HI-LOK™ PIN
HI-LOK™ PIN AND COLLAR AFTER ASSEMBLY
1
SEE COLLAR STANDARDS
SOCKET DOUBLE FOR COLLAR STRENGTHS.
FIRST PIN S TENSION
DASH NOM A B D TD F H R Z THREAD SHEAR POUNDS
LOWER STRENGTH (PIN OR
CHAMFER W T Y POUNDS COLLAR) DETERMINES
NO. DIA DIA REF DIA DIA REF RAD MAX REF MODIFIED MINIMUM
HEX DEPTH DIA MINIMUM SYSTEM STRENGTH
.2612 .1635 .1595 .0410 .025 .1640-32 .0801 .135
5 5/32 .312 .004 .010 1/32 x 45° 7 4,010 1,290
.2564 .1625 .1570 .0390 .015 UNJC-3A .0791 .115
.3016 .1895 .1840 .0470 .030 .1900-32 .0806 .135 .119
6 3/16 .325 .005 .015 1/32 x 45° 5,380 2,000
.2966 .1885 .1810 .0450 .020 UNJF-3A .0791 .115 .104
.3948 .2495 .2440 .0610 .030 .2500-28 .0967 .150 .142
8 1/4 .395 .006 .015 1/32 x 45° 9,300 3,700
.3898 .2485 .2410 .0590 .020 UNJF-3A .0947 .130 .122
.4739 .3120 .3060 .0680 .040 .3125-24 .1295 .170 .180
10 5/16 .500 .007 .015 3/64 x 45° 14,600 5,000
.4689 .3110 .3020 .0660 .030 UNJF-3A .1270 .150 .160
.5604 .3745 .3680 .0780 .040 .3750-24 .1617 .200 .217
12 3/8 .545 .008 .015 3/64 x 45° 21,000 7,200
.5554 .3735 .3640 .0760 .030 UNJF-3A .1582 .180 .197
.6680 .4370 .4310 .0969 .040 .4375-20 .1930 .230 .253
14 7/16 .635 .009 .022 3/64 x 45° 28,600 10,000
.6620 .4360 .4260 .0944 .030 UNJF-3A .1895 .210 .233
.7540 .4995 .4930 .1068 .050 .5000-20 .2242 .260 .289
16 1/2 .685 .010 .022 3/64 x 45° 37,300 13,500
.7480 .4985 .4880 .1043 .040 UNJF-3A .2207 .240 .269
.8380 .5615 .5550 .1160 .050 .5625-18 .2555 .290 .326
18 9/16 .770 .010 .022 1/16 x 45° 47,200 17,000
.8310 .5605 .5500 .1130 .040 UNJF-3A .2520 .270 .306
.9250 .6240 .6180 .1260 .050 .6250-18 .2555 .330 .326
20 5/8 .825 .010 .025 1/16 x 45° 58,300 21,000
.9180 .6230 .6120 .1230 .040 UNJF-3A .2520 .305 .306
1.0970 .7490 .7430 .1460 .050 .7500-16 .3185 .395 .398
24 3/4 1.050 .012 .030 1/16 x 45° 83,900 30,700
1.0850 .7480 .7370 .1410 .040 UNJF-3A .3150 .365 .378
1.3197 .8740 .8680 .1870 .050 .8750-14 .3820 .455 .471
28 7/8 1.210 .014 .035 5/64 x 45° 114,000 42,000
1.3030 .8730 .8610 .1800 .040 UNJF-3A .3780 .425 .451
1.5186 .9990 .9930 .2180 .050 1.0000-12 .5100 .580 .618
32 1 1.390 .014 .035 5/64 x 45° 149,000 55,000
1.4995 .9980 .9860 .2100 .040 UNJF-3A .5040 .550 .598
APPROVED DATE
ALLOY STEEL
CESSNA 1962-07-29
1/16 GRIP VARIATION
REVISION DATE DRAWING NUMBER
HL19
A.CHAE
31 2020-09-17
1 OF 2
C 2020 Hi-Shear Corporation
LISI AEROSPACE – Please refer to Central Documentation Website to check validity
S
AEROSPACE
hi-shear corporation
2600 SKYPARK DRIVE, TORRANCE, CALIFORNIA 90509 U.S.A.
GENERAL NOTES: 1 Head edge out of roundness shall not exceed "F".
2. Concentricity: Conical surface of head to "D" diameter within .005 FIM.
3. Dimensions are in inches and to be met after finish.
4. Surface texture per ASME B46.1.
5. Hole preparation per NAS618.
6. "H" is dimensioned from maximum "D" diameter.
7 Evidence of broken edge across points.
8 Non-lubed pins must be used with lubed collars or wet sealant.
9 Curved or flat edge manufacturer's option.
10. Use HL63 for oversize replacement.
31 HEAT TREAT: 95,000 psi shear minimum (160,000 - 180,000 psi tensile per AMS2759).
FINISH: HL19-( )-( ) = Cadmium plate per AMS-QQ-P-416, Type I, Class 2, and cetyl alcohol lube per
Hi-Shear Spec. 305.
HL19PB( )-( ) = Cadmium plate per AMS-QQ-P-416, Type II, Class 2, and cetyl alcohol lube per
per Hi-Shear Spec. 305.
8 HL19PN( )-( ) = Cadmium plate per AMS-QQ-P-416, Type II, Class 2.
HL19TF( )-( ) = Cadmium plate per AMS-QQ-P-416, Type III, Class 2, and HI-KOTE™ 2 solid
film lube per Hi-Shear Spec. 292.
HOW TO ORDER
EXAMPLE: Pin Part Number
HL19PB8-8
DRAWING NUMBER
HL19 2 OF 2
C 2020 Hi-Shear Corporation