You are on page 1of 51










6.3.9
7




7.1


7.2


7.3

7.4
7.5


7.6


7.7 Backup and Recovery



7.8



8 Print Management

8.1

8.2

Image roam: In the image preview area, slide to move the image.

Image rotation: In the image preview area, rotate the image to any angle.

Image drag: After tapping this button and tapping the image, you can drag and
exchange images between different grids and films.

Restore defaults: Restore an image to a default status before adjustment.

Patient information display: Display the patient information on the four corners of
the image.

Negative image: Reserve the pixel color between black and white.

Rotate the image 90 degrees to the left.

Rotate the image 90 degrees to the right.

Up-down mirror image: Display the image upside down.

Left-right mirror image: Mirror an image display.

8.3
8.3.1
8.3.2
8.3.3
8.3.4
8.3.4.1



8.3.4.2

8.3.5
8.3.5.1

8.3.5.2
8.3.5.3

8.3.5.4

8.3.5.5
8.3.5.6

8.3.5.7

8.3.6

8.3.7


8.3.8
9 Setup
9.1




9.2

9.3
9.4
9.5
9.6
Click . The typesetting screen for adding body part printing is displayed.

After selecting a body part, click to select a film size. Click to select film print
typesetting. Click to select a film orientation. Click to save the current body

part setting.

a) Automatically print failed task: The system prints the failed DICOM task
automatically after a network cable is connected.
b) Automatically print unprinted image: The system automatically prints the
images that are not printed during the following time segments after a network
cable is connected.
Automatic print time segment: The options are today, past three days, and past one week.
9.7
9.8

Select the export path and click . Wait until export ends. The following
figure shows that export is completed.
Select the time period for export (today, past three days, past one month, customized, all),

and click and wait.


The following figure shows that export is completed.
9.9

You might also like