Professional Documents
Culture Documents
CALCULATION SHEET
PROJECT:
RESIDENTIAL BUILDING
Sendpeace
MAY, 2012
1. INTRODUCTION
1.1 GENERAL
1.2 PROJECT DESCRIPTION
2. MATERIAL
3. LOADING
3.1 DEAD LOAD (DL).
3.2 LIVE LOADS(LL).
3.3 SEISMIC LOADS(S).
3.4 LOAD COMBINATION.
2 of 30.
1. INTRODUCTION
1.1 General
This calculation sheet presents the design consideration and analysis of the reinforced
concrete elements (Slabs, Beams, Columns and Foundation) for building consists of Ground,
4 Typical.
2. Material properties:
3. Loading
The proposed structure is analyzed using computer program "SAP 2000" to calculate the
internal forces in the structural elements due to the applied forces as mentioned above
after that the structural elements.
3 of 30.
4.1 DESIGN OF REINFORCED CONCRETE SLABS.
4.2 DESIGN OF REINFORCED CONCRETE BEAMS.
4 of 30.
4.1. Design of Reinforced Concrete Slabs
Flat slab system is utilized for all floors of the building of thickness and reinforcement as
shown in the structural drawings.
-Flat Slab:
Ult.
Moment Breadth Depth As Asmin Used add
Sec. C1 J Notes
d Mesh Rft. /m
2 2
Mu (m.t) b (cm) (cm) (cm ) (cm ) As Rft./m
1 4.13 100 20.5 5.044 0.826 6.78 3.08 6.78 6 12 0 12 safe
2 2.92 100 20.5 5.998 0.826 4.70 3.08 4.70 6 10 0 10 safe
-Beam Moments:
5 of 30.
SAP2000 5/18/12 15:21:04
6 of 30.
SAP2000 v14.1.0 - File:GS - Deformed Shape (DEAD) - Tonf, m, C Units
SAP2000 5/18/12 15:21:57
7 of 30.
-2.92 -2.38 -1.84 -1.29 -0.75 -0.21 0.33 0.88 1.42 1.96 2.50 3.05 3.59 4.13
SAP2000 v14.1.0 - File:GS - Resultant M11 Diagram (Ultimate) - Tonf, m, C Units
SAP2000 5/18/12 15:22:26
8 of 30.
-2.92 -2.38 -1.84 -1.29 -0.75 -0.21 0.33 0.88 1.42 1.96 2.50 3.05 3.59 4.13
SAP2000 v14.1.0 - File:GS - Resultant M22 Diagram (Ultimate) - Tonf, m, C Units
SAP2000 5/18/12 15:24:16
9 of 30.
0.40 0.80 1.20 1.60 2.00 2.40 2.80 3.20 3.60 4.00 4.40 4.80 5.20 5.60 E-3
SAP2000 v14.1.0 - File:GS - Deformed Shape (Working) - Tonf, m, C Units
SAP2000 5/18/12 15:26:37
10 of 30.
SAP2000 v14.1.0 - File:GS - Joint Reactions (Ultimate) - Tonf, m, C Units
SAP2000 5/18/12 15:23:14
11 of 30.
SAP2000 v14.1.0 - File:GS - Moment 3-3 Diagram (Ultimate) - Tonf, m, C Units
SAP2000 5/18/12 15:23:34
12 of 30.
SAP2000 v14.1.0 - File:GS - Shear Force 2-2 Diagram (Ultimate) - Tonf, m, C Units
4.3 DESIGN OF REINFORCED CONCRETE COLUMNS.
DESIGN OF COLUMNS
13 of 30.
SAP2000 5-16-12 13:25:16
14 of 30.
SAP2000 v14.1.0 - File:GS - X-Y Plane @ Z=0 - Tonf, m, C Units
Design of columns
Fcu= 250 Kg/cm2 Fy = 3600 Kg/cm2 γc = 2.5 Kg/cm3
T.F No. = 4 Floors
Pu / Floor PU(t) tact. Ac As As
Column Ac (cm2) b (cm) t (cm) µ (%) C#
GS TS SAP2000 (cm) (act.) (cm2) n Φ Dia.
C20 3.16 3.16 17.36 155.55 30 10 40 1200 12 6 Φ 16 0.01
C13 4.32 4.32 23.77 212.95 30 10 40 1200 12 6 Φ 16 0.01
C21 4.42 4.42 24.30 217.73 30 10 40 1200 12 6 Φ 16 0.01
C1 5.07 5.07 27.86 249.63 30 10 40 1200 12 6 Φ 16 0.01
C6 9.00 9.00 49.52 443.67 30 20 40 1200 12 6 Φ 16 0.01
C17 9.08 9.08 49.96 447.62 30 20 40 1200 12 6 Φ 16 0.01
C36 9.71 9.71 53.39 478.30 30 20 40 1200 12 6 Φ 16 0.01
C31 10.60 10.60 58.30 522.30 30 20 40 1200 12 6 Φ 16 0.01
C9 10.97 10.97 60.33 540.48 30 20 40 1200 12 6 Φ 16 0.01
15 of 30.
C1
C23 11.69 11.69 64.32 576.24 30 20 40 1200 12 6 Φ 16 0.01
C22 12.29 12.29 67.58 605.48 30 30 40 1200 12 6 Φ 16 0.01
C19 12.98 12.98 71.40 639.64 30 30 40 1200 12 6 Φ 16 0.01
C25 13.25 13.25 72.85 652.67 30 30 40 1200 12 6 Φ 16 0.01
C11 14.50 14.50 79.73 714.34 30 30 40 1200 12 6 Φ 16 0.01
C14 16.49 16.49 90.69 812.49 30 30 40 1200 12 6 Φ 16 0.01
C30 16.90 16.90 92.96 832.83 30 30 40 1200 12 6 Φ 16 0.01
C29 17.29 17.29 95.11 852.10 30 30 40 1200 12 6 Φ 16 0.01
C16 17.33 17.33 95.33 854.08 30 30 40 1200 12 6 Φ 16 0.01
C28 18.71 18.71 102.92 922.04 30 40 50 1500 15 8 Φ 16 0.01
C15 18.72 18.72 102.97 922.50 30 40 50 1500 15 8 Φ 16 0.01
C24 19.46 19.46 107.02 958.78 30 40 50 1500 15 8 Φ 16 0.01
C35 20.14 20.14 110.78 992.43 30 40 50 1500 15 8 Φ 16 0.01 C2
C3 20.98 20.98 115.41 1033.97 30 40 50 1500 15 8 Φ 16 0.01
EL-Bedier CALCULATION SHEET
Proj Name Mr.Hani Abd ElHameed DATE 18/05/2012
Civil Design Office Subject Earthquakes PAGE 1
Cairo, Egypt. Ref Dwg BY M.A
Date 18/05/2012 CHECK M.A
Design of Earthquake Using (Equivalent static load method)
V= (Z I K C S) * W
2 0.2 الدلتا- الصحراء الشرقيه و الغربيه- القاھره 1.25 للمنشآت المستخدمه في أغراض الطوارئ مثل
وسط شبه جزيرة سيناء- المستشفيات و أقسام الشرطه و اإلتصاالت
N= 5 Floors
b= 20 m
W D.LTotal= 1140 ton
Fj = Wj*Hj*(V-Ft)/∑(Wi*Hi) ; i=1,n
Where :-
Wj: The design weight for floor(j) Wj= 228.00 Ton
1/2
Floor No. H (Floor) Wj Wj*Hj ∑Wi*Hi V-Ft Fj
1 3 228 684 10260 19.78 1.32 Fi/Floor
2 6 228 1368 10260 19.78 2.64
6
3 9 228 2052 10260 19.78 3.96
4 12 228 2736 10260 19.78 5.27 5
5 15 228 3420 10260 19.78 6.59
0 0 0 0 0 0.00 0.00 4
0 0 0 0 0 0.00 0.00
3
2
Moment at Base =
217.54 t.m
1
Resisting Moment = W total * B/2 = 11400 t.m
0
8.00 6.00 4.00 2.00 0.00
Factor of Safety = = 52.40 >1.5 SAFE
Fi/Floor
17 of 30.
2/2
4.4 DESIGN OF REINFORCED CONCRETE FOOTING.
DESIGN OF FOOTING
18 of 30.
El-Bedier Proj No. 120516 CALCULATION SHEET
Proj Name Sendpeace REV 0 DATE 17/05/2012
Technical Office Subject F2 PAGE 1
Cairo, Egypt. Ref Dwg BY M.A
Date 18/05/2012 CHECK M.A
Calculation
Design of isolalted footing subjected to Normal force only According ECCS 203-2001
Dimension of PC footing
Output Value Unit
PC Area 6.33 m2 Required area of PC footing Safety Conditions
B 2.47 m Smaller Dimension PC footing Stress on Soil
L 2.57 m Bigger Dimension PC footing
Safe
Chosen Dimension
B 2.50 m Chosen Width of PC footing 102.63%
L 2.60 m Chosen Length of PC footing Shear on RC
q act 9.74 t/m2 Actual stress under PC
Safe
RC footing 128.25%
Output Value Unit Punching
B 1.70 m Width of RC footing
Safe
L 1.80 m Length of RC footing
qu act 31.05 t/m2 Actual ultimate stress under PC 143.55%
X 0.70 m
MUL 7.61 mt/m
Assume C1=5 so sec a or b sec
Calc d 27.58 cm for shear for moment
Chosen d 33.00 cm X X
t - RC 40.00 cm
Check shear
equ (4-30) qcu- shear 6.45 kg/cm2 MUL MUL
d/2
Qul 16.61 t
qu-shear 5.03 kg/cm2
Check Punching qu act
QUP 80.72 t
b0 272.00 cm
qup 8.99 kg/cm2
qcup the min of the following d/2
equ (4-32-a) qcup 22.12 kg/cm2
equ (4-32-b) qcup 16.14 kg/cm2 d/2
b
Bottom RFT a
As required 7.75 cm2/m 0.23%
check punching
As min 4.95 cm2/m 0.15%
As Chosen 7.75 cm2/m 0.23%
As Chosen / m' 19 of 30. 5 16 /m'
El-Bedier Proj No. 120516 CALCULATION SHEET
Proj Name Sendpeace REV 0 DATE 17/05/2012
Technical Office Subject F2 PAGE 1
Cairo, Egypt. Ref Dwg BY M.A
Date 18/05/2012 CHECK M.A
Calculation
Design of isolalted footing subjected to Normal force only According ECCS 203-2001
Dimension of PC footing
Output Value Unit
PC Area 8.67 m2 Required area of PC footing Safety Conditions
B 2.85 m Smaller Dimension PC footing Stress on Soil
L 3.05 m Bigger Dimension PC footing
Safe
Chosen Dimension
B 2.85 m Chosen Width of PC footing 100.30%
L 3.05 m Chosen Length of PC footing Shear on RC
q act 9.97 t/m2 Actual stress under PC
Safe
RC footing 149.21%
Output Value Unit Punching
B 2.05 m Width of RC footing
Safe
L 2.25 m Length of RC footing
qu act 28.18 t/m2 Actual ultimate stress under PC 166.24%
X 0.88 m
MUL 10.79 mt/m
Assume C1=5 so sec a or b sec
Calc d 32.85 cm for shear for moment
Chosen d 43.00 cm X X
t - RC 50.00 cm
Check shear
equ (4-30) qcu- shear 6.45 kg/cm2 MUL MUL
d/2
Qul 18.60 t
qu-shear 4.33 kg/cm2
Check Punching qu act
QUP 110.87 t
b0 332.00 cm
qup 7.77 kg/cm2
qcup the min of the following d/2
equ (4-32-a) qcup 23.18 kg/cm2
equ (4-32-b) qcup 14.20 kg/cm2 d/2
b
Bottom RFT a
As required 8.44 cm2/m 0.20%
check punching
As min 6.45 cm2/m 0.15%
As Chosen 8.44 cm2/m 0.20%
As Chosen / m' 20 of 30. 5 16 /m'
El-Bedier Proj No. 120516 CALCULATION SHEET
Proj Name Sendpeace REV 0 DATE 17/05/2012
Technical Office Subject F3 PAGE 1
Cairo, Egypt. Ref Dwg BY M.A
Date 18/05/2012 CHECK M.A
Calculation
Design of isolalted footing subjected to Normal force only According ECCS 203-2001
Dimension of PC footing
Output Value Unit
PC Area 10.73 m2 Required area of PC footing Safety Conditions
B 3.13 m Smaller Dimension PC footing Stress on Soil
L 3.43 m Bigger Dimension PC footing
Safe
Chosen Dimension
B 3.15 m Chosen Width of PC footing 101.25%
L 3.45 m Chosen Length of PC footing Shear on RC
q act 9.88 t/m2 Actual stress under PC
Safe
RC footing 132.55%
Output Value Unit Punching
B 2.35 m Width of RC footing
Safe
L 2.65 m Length of RC footing
qu act 25.85 t/m2 Actual ultimate stress under PC 138.04%
X 1.03 m
MUL 13.58 mt/m
Assume C1=5 so sec a or b sec
Calc d 36.85 cm for shear for moment
Chosen d 43.00 cm X X
t - RC 50.00 cm
Check shear
equ (4-30) qcu- shear 6.45 kg/cm2 MUL MUL
d/2
Qul 20.94 t
qu-shear 4.87 kg/cm2
Check Punching qu act
QUP 141.56 t
b0 352.00 cm
qup 9.35 kg/cm2
qcup the min of the following d/2
equ (4-32-a) qcup 22.23 kg/cm2
equ (4-32-b) qcup 12.91 kg/cm2 d/2
b
Bottom RFT a
As required 10.62 cm2/m 0.25%
check punching
As min 6.45 cm2/m 0.15%
As Chosen 10.62 cm2/m 0.25%
As Chosen / m' 21 of 30. 6 16 /m'
El-Bedier Proj No. 120516 CALCULATION SHEET
Proj Name Sendpeace REV 0 DATE 17/05/2012
Technical Office Subject F5 PAGE 1
Cairo, Egypt. Ref Dwg BY M.A
Date 18/05/2012 CHECK M.A
Calculation
Design of isolalted footing subjected to Normal force only According ECCS 203-2001
Dimension of PC footing
Output Value Unit
PC Area 13.33 m2 Required area of PC footing Safety Conditions
B 3.46 m Smaller Dimension PC footing Stress on Soil
L 3.86 m Bigger Dimension PC footing
Safe
Chosen Dimension
B 3.50 m Chosen Width of PC footing 102.38%
L 3.90 m Chosen Length of PC footing Shear on RC
q act 9.77 t/m2 Actual stress under PC
Safe
RC footing 117.93%
Output Value Unit Punching
B 2.70 m Width of RC footing
Safe
L 3.10 m Length of RC footing
qu act 23.89 t/m2 Actual ultimate stress under PC 106.36%
X 1.20 m
MUL 17.20 mt/m
Assume C1=5 so sec a or b sec
Calc d 41.48 cm for shear for moment
Chosen d 43.00 cm X X
t - RC 50.00 cm
Check shear
equ (4-30) qcu- shear 6.45 kg/cm2 MUL MUL
d/2
Qul 23.54 t
qu-shear 5.47 kg/cm2
Check Punching qu act
QUP 180.29 t
b0 372.00 cm
qup 11.27 kg/cm2
qcup the min of the following d/2
equ (4-32-a) qcup 21.38 kg/cm2
equ (4-32-b) qcup 11.99 kg/cm2 d/2
b
Bottom RFT a
As required 13.46 cm2/m 0.31%
check punching
As min 6.45 cm2/m 0.15%
As Chosen 13.46 cm2/m 0.31%
As Chosen / m' 22 of 30. 7 16 /m'
El-Bedier Proj No. 120516 CALCULATION SHEET
Proj Name Sendpeace REV 0 DATE 17/05/2012
Technical Office Subject F6 PAGE 1
Cairo, Egypt. Ref Dwg BY M.A
Date 18/05/2012 CHECK M.A
Calculation
Design of isolalted footing subjected to Normal force only According ECCS 203-2001
Dimension of PC footing
Output Value Unit
PC Area 13.93 m2 Required area of PC footing Safety Conditions
B 3.49 m Smaller Dimension PC footing Stress on Soil
L 3.99 m Bigger Dimension PC footing
Safe
Chosen Dimension
B 3.50 m Chosen Width of PC footing 100.48%
L 4.00 m Chosen Length of PC footing Shear on RC
q act 9.95 t/m2 Actual stress under PC
Safe
RC footing 116.49%
Output Value Unit Punching
B 2.70 m Width of RC footing
Safe
L 3.20 m Length of RC footing
qu act 24.19 t/m2 Actual ultimate stress under PC 101.67%
X 1.20 m
MUL 17.42 mt/m
Assume C1=5 so sec a or b sec
Calc d 41.73 cm for shear for moment
Chosen d 43.00 cm X X
t - RC 50.00 cm
Check shear
equ (4-30) qcu- shear 6.45 kg/cm2 MUL MUL
d/2
Qul 23.83 t
qu-shear 5.54 kg/cm2
Check Punching qu act
QUP 187.28 t
b0 392.00 cm
qup 11.11 kg/cm2
qcup the min of the following d/2
equ (4-32-a) qcup 20.62 kg/cm2
equ (4-32-b) qcup 11.30 kg/cm2 d/2
b
Bottom RFT a
As required 13.62 cm2/m 0.32%
check punching
As min 6.45 cm2/m 0.15%
As Chosen 13.62 cm2/m 0.32%
As Chosen / m' 23 of 30. 7 16 /m'
El-Bedier F6
Z0NE Prepared by : M.A Page :
Part : Checked by : M.A Date :
P1<P2
24 of 30.
F6
Prepared by : Page : of
Checked by : Date : Jan-00
Combined Footing Of (Col47-Co49)CF4
Mainl Direction
Top Reinforcements = 7.95 cm2/m' 4 Y 16 /m
Bottom Reinforcements = 7.95 cm2/m' 4 Y 16 /m
Hidden Beam
W1 = 13.79 t/m' M1 = 13.39 t.m As1 = 14.03 cm2
W2 = 28.41 t/m' M2 = 19.34 t.m As2 = 20.27 cm2
Asmin1 = 6.5985 cm2 As1 = 14.0343944 cm 2
Transeversal Direction
check of bond
qall = 7.5 t/m2 Q1 = 9.62 t Q2 = 9.62 t/m'
Q3 = 3.63 t Q4 = 3.77 t
qbond = 8.82 t/m2 unsafe
25 of 30.
El-Bedier F7
Z0NE Prepared by : M.A Page :
Part : Checked by : M.A Date :
P1<P2
26 of 30.
F7
Prepared by : Page : of
Checked by : Date : Jan-00
Combined Footing Of (Col47-Co49)CF4
Mainl Direction
Top Reinforcements = 7.95 cm2/m' 4 Y 16 /m
Bottom Reinforcements = 7.95 cm2/m' 4 Y 16 /m
Hidden Beam
W1 = 13.79 t/m' M1 = 13.39 t.m As1 = 14.03 cm2
W2 = 28.41 t/m' M2 = 19.34 t.m As2 = 20.27 cm2
Asmin1 = 6.5985 cm2 As1 = 14.0343944 cm 2
Transeversal Direction
check of bond
qall = 7.5 t/m2 Q1 = 9.62 t Q2 = 9.62 t/m'
Q3 = 3.63 t Q4 = 3.77 t
qbond = 8.82 t/m2 unsafe
27 of 30.
4.5 DESIGN OF REINFORCED CONCRETE STAIRS.
DESIGN OF STAIRS
28 of 30.
ai
St s
r
29 of 30.
30 of 30.