Professional Documents
Culture Documents
DANG75x75x8
35
40 70 40
NOTES:
USE GRADE 8.8 BOLTS WITH DTI WASHER
Bolts: Grade 10.9, M20, UNO
Welds: 6mm Fillet weld, UNO IF WRENCH ACCESS IS NOT AVAILABLE
Electrode: E70XX
Weld Size: 6mm FW is allowed where the thinner part joint is less than or equal to 19mm thick
Where the thinner part is greater than 19mm thick, the minimum requirement is 8mm FW
Main Steels: Grade S355, Fittings: Grade S275JR
Scallop/Chamfer to be as per WH-WI-1118