Professional Documents
Culture Documents
The IHC Beaver is well known for its robust Various components are mounted in or on the main
construction, reliable operation and excellent pontoon, including the cutter ladder, the two ladder
performance. To date, IHC Holland have supplied more actuator rams, control cabin, dredge pump, diesel
than 600 of these standard cutter suction dredgers. engines and auxiliary power units, discharge line and
The current range of standard, demountable cutter the spuds with their actuator rams.
suction dredgers consists of basic models, with power The cutter and swing winches, mounted on the ladder,
outputs ranging from 300 to 1,600 horse power. are powered by piston-type hydraulic motors.
The IHC Beaver 600 is just one type from this range.
The hull consists of three pontoons, one main pontoon
housing the engine room, and two side pontoons. All
parts are dimensioned to allow the IHC Beaver to be
transported by road, rail or sea.
solids of 20%
400
- final elevation at end of pipeline 4m grain size
A - fine sand 100µm 1,900kg/m3
300 B - medium sand 235µm 1,950kg/m3
C - coarse sand 440µm 2,000kg/m3
200 D - coarse sand/gravel 1.30mm 2,100kg/m3
E - gravel 7.00mm 2,200kg/m3
100 A
E D C B
0
0 1000 2000 3000 4000 5000 6000
Pipeline length in meters
IHC Holland reserves the right to amend dimensional or other data given in this publication without prior notice Copyright 2003 IHC Holland