Professional Documents
Culture Documents
Andreas Simson
Phone: +49 8252 97-1387
Andreas.Simson@bauer.de BAUER Concrete Filter Press
Range of Application:
Determining the water retention
ability of fresh concrete under
pressure
Standard
The test with the BAUER Concrete Filter Press is BAUER Spezialtiefbau GmbH
The Technical Service Department of BAUER The applied pressure for carrying out the test with Due to the numerous experiences with the
Spezialtiefbau GmbH has been successfully using the BAUER Concrete Filter Press was set to 5 bar, BAUER concrete filter press and in particu-
the BAUER Concrete Filter Press as a testing which is kept constant over a period of 5 minutes. lar the international application, a matrix has
device for determining the water retention ability of Depending on the requirements and experience, now been created which reflects the following
fresh concrete under pressure for around 10 years. it may be necessary to screen the coarse-grained guide values for the fresh concrete stability of
The test method was developed on the basis of concrete to be examined to a maximum of 8 mm. the special deep-casting concrete:
the tests according to API (American Petroleum In- According to internal experience, this screening
stitute) for the determination of the filtration water can usually be dispensed with up to a maximum Filtration water
of stabilizing slurries (e. g. bentonite suspensions). diameter of 20 mm. High requirements ≤ 22 ml
Medium requirements ≤ 40 ml
Locking bolt
Low requirements ≤ 60 ml
Pressure regulator
frame
Top part Filter cake
The filter cake produced in the test provides ad-
Sealing ring ditional information on the suitability of the fresh
Top part
of test cylinder concrete. A low filter cake height and a soft filter
cake is advantageous.
Sealing ring
Lower part