Professional Documents
Culture Documents
In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council
of 9 March 2011 (the Construction products Regulation or CPR), this certificate applies to the
construction product(s)
This certificate attests that all provisions concerning the assessment and verification of
constancy of performance described in Annex ZA of the standard(s)
EN 10219-1:2006
under system 2+ are applied and that
THE FACTORY PRODUCTION CONTROL IS ASSESSED TO BE IN CONFORMITY WITH
THE APPLICABLE REQUIREMENTS
This certificate will remain valid as long as neither the harmonised standard, the construction
product, the AVCP methods nor the manufacturing conditions in the plant are modified
significantly, unless suspended or withdrawn by the notified factory production control
certification body.
For more details see Appendix accompanying this Certificate.
Check Validity
Bjørn Spongsveen
Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DMSP-5-PA-CPR-05-A4 rev 1
NOTIFIED BODY 2388: DNV Business Assurance B.V., Zwolseweg 1, 2994 LB Barendrecht, The Netherlands, TEL: +31 10 2922 689 www.dnv.com
Certificate No.: 2388-CPR-22-67014 Rev. 2.0
Place and date: Barendrecht,, 2023-03-30
Appendix to Certificate
Certificate history:
Revision Description Issue Date
0.0 Original certificate 2014-03-31
st
1.0 1 Re Certification 2017-03-31
nd
3.0 2 Re Certification 2020-03-31
1.0 Scope Extension & Site Addition of Malanpur plant. Revision no. as per 2022-12-14
Internal production system
Cold formed
rectangular hollow
S235JRH, 40 X 20 –
sections (CFRHS) 2 – 10.0 - Black and
S355J2H 400 X 200
Galvanized
Site : 2
Harmonised Steel grade & Shape Tolerance, Thickness Width Ø Black /
Standard quality Dimensions mm mm mm Galvanized
and If applicable
Sectional
Properties
S235JRH, Cold formed square 1.6 – 12.7
S275JOH/J2H,S3 hollow sections 16 x 16 to
-
55JOH/J2H/K2H (CFRHS) 300 x 300 Black and
EN 10219- EN 10219- Galvanized
1:2006 S235JRH, Cold formed 2:2019 1.6 – 12.7 13 x 26 to
S275JOH/J2H,S3 rectangular hollow 400 x 200
-
55JOH/J2H/K2H sections (CFRHS) Black and
Galvanized
End of Certificate
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DMSP-5-PA-CPR-05-A4 rev 1
NOTIFIED BODY 2388: DNV Business Assurance B.V., Zwolseweg 1, 2994 LB Barendrecht, The Netherlands, TEL: +31 10 2922 689 www.dnv.com
Page 2 of 2