You are on page 1of 2

試験成績書

(TEST REPORT)

納入先
(Customer) Hospitalia Eastern Pvt. Ltd.

Fortis Hospital, Ludhiana

型 式
(Model) FTKM60UV16U

品質管理部
Q.C Dept
品質管理部長
QC AGM

No:23TN2304
DATE: 04-09-2023
Page 1/1
機 種
試験成績書 機 種 (Model)
下 記 記 載
(TEST REPORT) Mfg.No.
FTKM60UV16U as mentioned below

試験項目(Inspection Item) 判定基準(Standard) 結 果(Result)


気密試験 4.2+0.2±0.1MPaで洩れなきこと 合 格
(Air tight test) (No leakage ) (Good)
真空度
(Degree of vacuum)
絶縁抵抗試験 DC500V絶縁抵抗計で10MΩ以上 (注) 合 格
(Resistance Insulation test) (Over 10MΩ by DC500V insulation resistance tester) (Good)
(note)
耐電圧試験 (Note)
AC1800Vで1秒以上耐えること 合 格
(Voltage withstanding test) (Must Withstand AC1800V for 1 second or more) (Good)
ファン・運転試験 異常振動、異音なく回転すること 合 格
(Fan running test) (They must operate without abnormal (Good)
vibration or abnormal noise)
電流値が各機種の設定公差内に入っていること
(Current value must be within the tolerance
set for each model)

高圧圧力作動試験
(High pressure operation test)
漏洩試験 漏れなきこと 合 格
(Leak test) (No leakage shall be found) (Good)
外観試験 傷、歪み、汚れ、隙間、不揃い等の欠陥なきこと 合 格
(External appearance visual (No fault as like scrach, distortion, (Good)
inspection) soiling,gap,unevenness,etc shall be found)
銘板、表示類試験 正しく貼られていること 合 格
(Labels,indications) 記載事項の誤記、歪み、しわ、空気入り、 (Good)
剥がれなきこと
(They must stick correctly.
No error of mentioned item ,distortion,
wrinkle,bubble and peeling shall be found)
付属品試験 付属品の仕様、員数、機種名が一致していること 合 格
(Check of accessories) (Specification,number,model name shall
(Good)
be correct)
【注】据付前又は直後に測定した時、冷媒が圧縮機に溜まっている状態によっては本値より低下する場合があります。
【NOTE】 This value possibly drops caused by accumlation of refrigerant in the compressor,when
measuring is excuted before or just after installation.
機 種 名 (Model) 機 番 (Mfg.No.) 機 種 名 (Model) 機 番 (Mfg.No.)
FTKM60UV16U 15747
FTKM60UV16U 16365
FTKM60UV16U 16361
FTKM60UV16U 16371
FTKM60UV16U 16369

No: 23TN2304

You might also like