Professional Documents
Culture Documents
Department of Education
Region VII, Central Visayas
Division of Bohol
Activity Title: Record technical drawings and prepare an inventory in accordance with
company procedures
Learning (TLE_IACSS9-12PITD-IIj-16)
Competency:
Learning Target: To record technical drawings and prepare an inventory in accordance with
company procedures
References:
CONCEPT NOTES:
Identify tasks to be undertaken for care and maintenance of drawing according to company procedure
1. Pencil
a. Never sharpen the pencil over the drawing or close to any of your equipment.
b. Always keep the lead sharp.
3. Ruler or scale
a. Scales should not be pricked with needle Scales should points of either the divider or
compass when measurements are taken.
b. Do not use scale as a ruler.
4. Drawing paper
a. It should be stored in rolled form.
b. It should not be crumpled or wet or kept in a moist or cold place.
c. Oslo papers or bond papers must be kept in a large envelope.
Directions: The learners are divided into 2 groups. Each group will share how to care and maintain
the drawing according to company procedure.
EXERCISE #18
Matching Type
Directions: Match Column A with Column B. Write only the letter of the correct answer.
1. T-square triangles and French curves a. Always keep the lead sharp
2. Masking tape or scotch tape, eraser b. Never cut paper along its working edge, since
the plastic can easily be damaged.
3. Drawing board or drawing tape c. Scales should not be prickled with needle
4. Pencil points of either the divider or compass when
5. Ruler or scale measurements are taken.
6. Drawing paper d. It should be stored in rolled form.
e. Should be kept together with other supplies
to avoid losing it.
f. It must always be clean on or before using.
ANSWER KEY
1. B
2. E
3. F
4. A
5. C
6. D