Note: Considering that practical work activities could not be performed per weekly basis because of the required underpinning knowledge, the MHEI can deliver the same on the specified weeks provided below:
Time Allotment (in hours)
Term Week Topic Demonstration /
Theoretical Practical Work MIDTERM 1. Introduction to the Course and Orientation
1.1. Safety precaution prior to working;
1.2. Safety signs and posters
1.3. Importance of operation manual
1.4. Safety/toolbox meeting
1-2 1.5. Work permits 2 6
1.6. Firefighting and safety equipment
1.7. Elementary first aid
1.8. Personal Protective Equipment
1.9. Good housekeeping
1.10. Risk management and Assessment
3-4 2. Safe precaution during work 2 6
1.1. Safety use of tools
1.2. Various hand tools
1.3. Hygiene and first aid
Mach1 - Hand and Measuring Tools
JCMMC 01, 2023 UNIVERSITY OF CEBU MARITIME EDUCATION PROGRAM
Time Allotment (in hours)
Term Week Topic Demonstration /
Theoretical Practical Work
1.4. Safety awareness
1.5. Emergency situations
1.6. Electrical safety
5-8 3. Measuring Instruments 4 12
1.1. Selection of appropriate tools
1.2. Safey in the use of tools
1.3. Scales, Dials, and gauges reading
1.4. Rules and Steel tapes
1.5. L-square
1.6. Dividers
1.7. Level bar
1.8. Depth gauge
1.9. Feeler gauge
1.10. Screw pitch gauge
1.11. Vernier caliper
1.12. Micrometer caliper
1.13. Surface gauge
Mach1 - Hand and Measuring Tools
JCMMC 01, 2023 UNIVERSITY OF CEBU MARITIME EDUCATION PROGRAM
Time Allotment (in hours)
Term Week Topic Demonstration /
Theoretical Practical Work
1.14. Ruler
Midterm Examination and Practical Assessment
4. Portable power tools
1.1. Safety in the use of portable power tools
9-12 1.2. Pneumatic, hydraulic, and electrical power tool