Professional Documents
Culture Documents
II. INTRODUCTION
a. Short description of the proponents
Brief introduction of proponents (Year level, strand, section, group number,
name of proponents)
b. Short description of the paper
Brief summary of your whole project
III. RATIONALE
a. What is iParol?
b. Research
GAS – History of iParol
c. Concluding Statement
IV. DESCRIPTION
a. Objective:
i. To showcase or demonstrate creativity on the design of programmable digital
lanterns
Date Action
November 21 – 25, 2022 Designing and structure making of iParol
November 28 – December 2, 2022 Arduino programming and continuation of
structure making
December 5 – 9, 2022 Continuation of Arduino programming and
polishing of the iParol’s structure and frame
December 12-13, 2022 Wire and LED installation
January 4 -6, 2023 Finalizing and Testing
January 9 – 13, 2023 iParol Exhibition
c. Anticipated Outcome: (size – 14 inches in diameter, duration – 2-3 mins, layout – 50-60
compartments; include here the final design of your iParol)
Structure
Description
Used Folder
Used Illustration Board
Acrylic spray paint
Glue gun/glue stick
iParol Components
Cost (unit x price
Materials Unit Price per unit
per unit)
Arduino Nano 1 pc
74HC 595 IC 8 pcs
IC Holder 8pcs
JST pins 5pcs
Black (GND) 10m
Stranded wire
Red (Positive) 30m
PCB Matrix 1 pc
Power adaptor 12v 1 pc
Soldering iron 1 pc
Soldering lead 1pc
USB to DC Cord 1pc
Dependent with
LED 5mm
the iParol design
Resistor (470 ohms Dependent with
¼ watts) the number of LEDs
Total Cost:
b. Personnel
i. Designer (in charge with the frame and structure design)
Names
ii. Programmer (in charge of the programming/code)
Names
iii. Circuit Maker (in charge of wiring and soldering)
Names
iv. Light Sequencer (in charge of the arrangement of light sequences)
Names
*Guidelines:
4. Attach documentation (pictures while designing, constructing and programming the project)