Professional Documents
Culture Documents
2023 , 07:03:19 AM
________________________________________________________________________________________________
Product code
Short: P1J916598
Long: 7SJ85DAAAAA00AAAA0AH011113111BACA000000AC0CB1BA1CE0CE0EA0
Technical Data:
Communication/Plug-in modules:
Functions:
From Version V9.3 on the function-points class "1400+" is withdrawn. With this class function-points
exceeding the limit of 1400 were free of charge. The maximum function-points class is now 1400. If a
function-points budget of more than 1400 points is required for a device the application
Function-Point-Manager need to be applied. All function points are liable to cost.
In the engineering phase DIGSI 5 checks that the selected configuration is suitable (capable of running
in the device) before loading it to the device.
Miscellaneous:
Warranty: 5 years
Special Approvals: Without
Firmware: Current version
________________________________________________________________________________________________
2/8
SIPROTEC 5 - Configuration 05.09.2023 , 07:03:19 AM
________________________________________________________________________________________________
(P1J916598)
37 Undercurrent I<
86 Lockout
________________________________________________________________________________________________
3/8
SIPROTEC 5 - Configuration 05.09.2023 , 07:03:19 AM
________________________________________________________________________________________________
Control
________________________________________________________________________________________________
5/8
SIPROTEC 5 - Configuration 05.09.2023 , 07:03:19 AM
________________________________________________________________________________________________
________________________________________________________________________________________________
6/8
SIPROTEC 5 - Configuration 05.09.2023 , 07:03:19 AM
________________________________________________________________________________________________
Number of two-winding 2 5 0
transformers with parallel
operation (Note: only together 2X
with the function "Automatic
voltage controller for
two-winding transformer with
parallel operation")
90V Automatic voltage controller 0 200 0
for three-winding transformer
90V Automatic voltage controller 0 175 0
for grid coupling transformer
FL Fault locator, single-sided FL-one 0 25 0
FL Fault locator plus (from V7.9) FL plus 0 45 0
PMU Synchrophasor measurement PMU 0 40 0
Measured values - extended: 0 3 0
Min, Max, Avg
PQ-Basic measured values: 0 20 0
Voltage unbalance (from
V8.40)
PQ-Basic measured values: 0 30 0
Voltage variations - voltage
dips, swells and interruptions
(from V8.40)
PQ-Basic measured values: 0 10 0
TDD - Total Demand Distortion
(from V8.40)
CFC arithmetic 0 40 0
Circuit-breaker monitoring ΣIx, I²t, 2P, tO, 0 10 0
(from V9.20) tC, pole
scatter,
discepancy
Disconnector monitoring (from tO, tC 0 5 0
V9.50)
Switching sequences function 0 5 0
PoW Point-on-wave switching (from PoW 0 425 0
V7.90)
Circuit-breaker 4X 4 3 0
Disconnector/Grounding 4X 4 3 0
switch
Multiplexing of protection 0 50 0
interface
SSR Slow-scan recorder (Mod.: SSR 1X 1 40 0
from V8.80, Non-Mod.: from
V9.40)
________________________________________________________________________________________________
7/8
SIPROTEC 5 - Configuration 05.09.2023 , 07:03:19 AM
________________________________________________________________________________________________
________________________________________________________________________________________________
8/8