Professional Documents
Culture Documents
有限元疲劳分析法在口腔修复研究中的应用进展 苏晓敏
有限元疲劳分析法在口腔修复研究中的应用进展 苏晓敏
·综述·
有限元疲劳分析法在口腔修复研究中的应用进展
【 摘要 】在过去的几十年中,计算方法尤其是有限元分析,已成为科学和工程学领域中必不可少的方法,被
广泛用于模拟现实中的实验,包括工业产品开发,机器设计和生物医学研究,尤其是在生物力学和生物材料方
面。随着技术的不断改进,有限元分析和建模的适用性也在不断提高。从基于材料/结构的裂纹扩展分析到基于
S-N 曲线的疲劳寿命分析,有限元在疲劳寿命分析方面取得了重大进展,促进了疲劳分析领域的发展。目前,利
用常规力学实验来分析口腔修复体的疲劳寿命仍是基础,但疲劳实验成本高,效率低,疲劳试验机功能相对单
一,难以模拟材料/结构在多种复合工况下的试验,并且实验过程中往往容易忽略材料形状等因素的干扰,使得实
验数据与真实情况大相径庭。因此,人们开始应用有限元分析软件来获得材料/结构的疲劳寿命,这种方法主要
是依据材料自身的疲劳性能参数,模拟其在真实环境下所受的载荷,基于研究模型来分析计算材料的疲劳寿命,
具有节约成本、
实用、
可重复性等优点。在口腔领域,该技术已成为分析预测天然牙、
种植体、
修复材料及周围骨
组织应力应变的重要工具。本文主要针对有限元疲劳分析方法在口腔修复体研究中的应用作一综述,以期为临
床工作提供一定指导。
关键词:有限元分析;疲劳;口腔修复
[中国图书分类号]R783 [文献标识码]A DOI:10.19748/j.cn.kqxf.1009-3761.2023.3.011
Progress in the application of finite element fatigue analysis in dental prosthodontic research
SU Xiao-min, WU Feng, SHI Yue, WANG Hong-yan, FENG Jing, SUN Xi-lin. (Dept. of Prosthodontics, Shanxi Medical
University School and Hospital of Stomatology, Taiyuan 030001, China )
【Abstract】 In the past few decades, computational methods,mainly finite element analysis, have become
indispensable methodologies in the field of science and engineering, and have been widely used to simulate real-life
experiments, including industrial product development, machine design and biomedical research, especially in
biomechanics and biomaterials. With the continuous improvement of technology, the applicability of finite element
analysis and modeling has also been improved. From crack growth analysis based on material / structure to fatigue life
analysis based on S-N curve, the finite element method has made great progress in fatigue life analysis, which
promotes the development of the fatigue analysis field. At present, the use of conventional mechanical experiments to
analyze the fatigue life of dental prostheses is still the basis, but because of the high cost and low efficiency of fatigue
experiment, also the function of fatigue testing machine is relatively simple, it is difficult to simulate the test of
material / structure under various complexed working conditions, and it is easy to ignore the interference of material
shape and other factors in the process of experiment. It makes the experimental data quite different from the real
situation. Therefore, people begin to use the finite element analysis software to obtain the fatigue life of the material /
structure. This method is mainly based on the fatigue performance parameters of the material to simulate the load in
the real environment, and to analyze and calculate the fatigue life of the material based on the research model, which
has the advantages of cost saving, practicality, repeatability and so on. In the field of stomatology, this technique has
become an important tool for analyzing and predicting the stress and strain of natural teeth, implants, restoration
·224 ·
Chin J Prosthodont, May 2023, Vol. 24, No.3 口腔颌面修复学杂志 2023 年 5 月第 24 卷第 3 期
materials and surrounding bone tissues. This paper mainly reviews the application of finite element fatigue analysis
method in oral restoration, in order to provide some guidance for clinical work.
Key words: finite element analysis; fatigue; prosthodontics
有限元分析是一种预测不同材料在施加一定 用有限元分析软件对研究对象进行疲劳寿命计算
[1]
范围的力时将如何反应的计算技术 。随着技术的 时,一般会采用以下两种方法。第一种方法:首先
不断改进,有限元分析和建模的适用性在不断提 将试验模型导入有限元分析软件,然后逐步进行材
高。从基于材料/结构的裂纹扩展分析到基于 S- 料参数(疲劳极限、屈服极限、疲劳强度系数、疲劳
N 曲线的疲劳寿命分析,有限元在疲劳寿命分析方 强度指数等)
的设置、网格尺寸的划分、加载和约束
[2]
面取得了重大进展 。目前,在口腔领域,有限元软 等步骤,并在此基础上进行疲劳分析和计算,在此
件已被广泛应用于分析计算口腔材料的疲劳寿命。 过程中不会输出其它的结果,从而获得了研究对象
利用有限元方法对口腔修复体的疲劳寿命进行了 的疲劳寿命;第二种是:首先将试验模型中的应力
分析,可以为临床修复方案的制定以及材料的耐久 数据保留下来,将其直接输入到疲劳分析模块中,
性和可靠性提供一定理论的理论基础。因此,本文 然后根据试验数据进行疲劳寿命的分析,获得最终
[3]
主要针对有限元疲劳分析法 在口腔修复体中的应 的试验结果[9,10]。
用作一综述,以期为临床工作提供一定指导。
2. 有限元疲劳分析法在口腔修复体研究分析中
1. 有限元疲劳分析法的相关理论基础 的应用
1.1 疲劳分析原理 材料或结构受到反复变化 2.1 全瓷冠桥疲劳行为的有限元分析 在日常
的载荷后,当应力未超出其极限强度,或低于其弹 咀嚼过程中,全瓷冠修复体的材料性能一般都能够
性极限时,便会产生失效。这种在持续载荷作用下 满足设计和使用要求。然而,修复体在口腔中使用
材料发生破坏的现象,就叫做疲劳破坏。一般可根 一段时间后出现折裂的情况时常发生,这说明持续
据循环次数将疲劳破坏分为两种:高周疲劳和低周 加载的咬合力能够直接导致修复体出现疲劳失效。
[4]
疲 劳 。 高 周 疲 劳 是 在 载 荷 的 重 复 次 数 较 高( 如 因此,在修复体设计前,进行疲劳分析和寿命计算
4 9
10 -10 )的情况下发生的。因此,其应力一般低于 是很有必要的。
材料的强度极限;低周疲劳是在循环次数相对较低 Bataineh K 等人[11]采用有限元方法对用于第一
时发生的。塑性变形往往与低周疲劳有关。修复 磨牙修复的九种新型 CAD/CAM 陶瓷材料的疲劳寿
5
体在口腔中的循环疲劳次数远远高于 10 ,因此属 命进行了估算,
实验结果表明除聚合物渗透陶瓷(PIC)
[5]
于高周循环 。修复材料的疲劳失效性能是多种应 冠在 100 N 的作用力下在一周
(1 周相当于 2 万个循
[6]
力综合作用的结果,故其应用名义应力法(S-N) 环周期)
内失效外,
其余材料制成的牙冠的预测寿命
来进行疲劳寿命分析。 均大于 10 年。这与 Nasrin S[12]在全瓷冠的静疲劳有
通常,S-N 曲线被用来描述材料的疲劳性能,S 限元研究基本一致。Homaei E[13]用数值方法估算二
表示所加载的应力,或者是施加的动态应变,N 表 硅酸锂(LD)和聚合物渗透陶瓷(PIC)两种牙科陶瓷修
示疲劳寿命,即应力或应变的循环数。一般情况 复的前磨牙的疲劳寿命。结果在 1400 N 的疲劳载荷
下,结构的疲劳寿命取决于材料的力学性能和所施 下,
二硅酸锂的预测寿命为 121318 次,
而在 870 N 的
加的应力程度,材料的强度极限愈高,外加的应力 载荷下,
PIC 的预测寿命为 475,063 次,
两种陶瓷的最
水平愈低,试样的疲劳寿命就愈长;反之,疲劳寿命 大主应力峰值都出现在接触区和中央窝。当将有限
[7]
就愈短 。有限元分析软件就是基于 S-N 曲线的 元分析结果与体外研究[14]相比较时,
最大应力区和失
线性累积损伤方法(Palmgram-Miner 法则)进行 效区域之间有很好的验证。这项研究,
像其他FEA 研
[8]
疲劳寿命的计算 。 究一样,
假设所有材料都是均匀的、
各向同性的和线
1.2 疲劳分析的一般流程 通常来说,疲劳寿 弹性的。然而,
牙齿成分
(因为牙本质中小管的存在)
命的分析主要是以软件模拟的形式完成的。而利 是异质性和各向异性的[15],
这样会导致计算的疲劳寿
·225 ·
口腔颌面修复学杂志 2023 年 5 月第 24 卷第 3 期 Chin J Prosthodont, May 2023, Vol. 24, No.3
·226 ·
Chin J Prosthodont, May 2023, Vol. 24, No.3 口腔颌面修复学杂志 2023 年 5 月第 24 卷第 3 期
·227 ·
口腔颌面修复学杂志 2023 年 5 月第 24 卷第 3 期 Chin J Prosthodont, May 2023, Vol. 24, No.3
clasps during direct retainer action in removable par- and anisotropic bone[J]. Materials (Basel), 2021, 14(22):
tial dentures[J]. Dent Mater, 2020, 36(2): 179-186 6974
[21]Peng TY, Ogawa Y, Akebono H, et al. Finite- [27]Bayata F, Yildiz C. The mechanical behaviors of
element analysis and optimization of the mechanical various dental implant materials under fatigue[J]. Adv
properties of polyetheretherketone (PEEK) clasps for Mater Sci Eng, 2018, 2018: 5047319
removable partial dentures[J]. J Prosthodont Res, [28]Lee H, Jo M, Noh G. Biomechanical effects of dental
2020, 64(3): 250-256 implant diameter, connection type, and bone density
[22]王淑英, 白保晶, 张振庭 . 摘取方式对铸造三臂卡环固位臂 on microgap formation and fatigue failure: a finite el-
应力影响的三维有限元研究[J]. 北京口腔医学, 2017, 25 ement analysis[J]. Comput Methods Programs Biomed,
(4): 193-196 2021, 200: 105863
Wang SY, Bai BJ, Zhang ZT. Influence of two denture [29]Prados-Privado M, Bea JA, Rojo R, et al. A new
removing methods on the retention of three-arm casting model to study fatigue in dental implants based on
clasps using the three-dimensional finite element method probabilistic finite elements and cumulative damage
[J]. Beijing J Stomatol, 2017, 25(4): 193-196 model[J]. Applied Bionics and Biomechanics, 2017,
[23]陈良建, 郭小平, 李益民, 等 . 动静态下仿生型钛种植体界 2017: 3726361
面 应 力 与 疲 劳 行 为 的 有 限 元 分 析 [J]. 中 南 大 学 学 报 (医 学 [30]Guilherme NM, Chung KH, Flinn BD, et al. Assess-
版), 2010, 35(7): 662-672 ment of reliability of CAD-CAM tooth-colored im-
Chen LJ, Guo XP, Li YM, et al. Finite element plant custom abutments[J]. J Prosthet Dent, 2016, 116
analysis for interfacial stress and fatigue behaviors of (2): 206-213
biomimetic titanium implant under static and dynamic [31]Rojo R, Prados-Privado M, Reinoso AJ, et al.
loading conditions[J]. J Cent South Univ Med Sci, Evaluation of fatigue behavior in dental implants from
2010, 35(7): 662-672 in vitro clinical tests: a systematic review[J]. Metals,
[24]Geramizadeh M, Katoozian H, Amid R, et al. Static, 2018, 8(5): 313
dynamic, and fatigue finite element analysis of dental [32]孙力, 李鸿波, 储冰峰 . 牙颌三维有限元建模方法的研究进
implants with different thread designs[J]. J Long 展[J]. 口腔颌面修复学杂志, 2010, 11(1): 52-54
Term Eff Med Implants, 2016, 26(4): 347-355 Sun L, Li HB, Chu BF. The research progress of
[25]Nokar S, Jalali H, Nozari F, et al. Finite element model establishing for three dimensional finite element
analysis of stress in bone and abutment-implant inter- method of teeth and mandible[J]. Chin J Prosthodont,
face under static and cyclic loadings[J]. Front Dent, 2010, 11(1): 52-54
2020, 17(21): 1-8 [33]Alshoaibi AM, Bashiri AH. Adaptive finite element
[26]Alemayehu DB, Jeng YR. Three-dimensional finite modeling of linear elastic fatigue crack growth[J]. Ma-
element investigation into effects of implant thread design terials (Basel), 2022, 15(21): 7632
and loading rate on stress distribution in dental implants (收稿日期:2022-08-05)
《中华老年口腔医学杂志》关于投稿的声明
近期有作者反映有网站冒用本刊刊号在线收稿和收取费用,使作者权益受到侵犯。为维护广大作者和读者的权益,维
护《中华老年口腔医学杂志》的声誉,防止非法网站假冒本刊诱导作者投稿、骗取相关费用,非法获利,《中华老年口腔医
学杂志》编辑部郑重声明,请从本刊官方投稿系统或邮箱投稿。
现将《中华老年口腔医学杂志》的在线投稿网址、投稿邮箱、电话及地址等公布如下,请广大作者加以甄别。
网址:http://zhkq.cbpt.cnki.net
投稿邮箱:cjgd301@163.com
电话:010-66936254
地址:北京市复兴路 28 号,解放军总医院《中华老年口腔医学杂志》编辑部。邮编:100853
(《中华老年口腔医学杂志》编辑部)
·228 ·