Professional Documents
Culture Documents
1. The Practical Training Report must be in Black Rexine, Hard Bound only.
2. The Top of the report must have the Title Page embossed in Golden color
3. The Title Page (Front cover) and the first page within the report should be
8. The next page is the Contents page which must cover the numbering of List
9. All the above mentioned pages must be colored and numbered in Roman
numbering, viz. (i), (ii), etc. from page first to contents page.
10. All other report pages must be numbered from the introduction page
Company Logo
NAME OF COMPANY
“Submitted In Partial Fulfillment of the Requirement for the Award
of the Degree of the Bachelor of Technology in Mechanical Engineering to Rajasthan
Technical University, Kota”
SUBMITTED BY
Vijay Kumar (15ME000)
2018-19
Acknowledgment
It is a great pleasure and privilege for me to present this practical training report carried
submitted in partial fulfillment of the requirement for the award of the degree of the
Kota.
We are very much thankful to Mr. X. Y. Zingh, Manager Production / Plant Head /
every step to a great extent. This training would not have been possible without his
support and able guidance. He was very supportive throughout the given period in sharing
Finally, we express earnest and sincere thanks to the whole “Name of Company” for the
I hereby declare that the work, which is being presented in the practical training report
and submitted in partial fulfillment of the requirement for the award of the degree of the
Kota is a record of my training carried under the Guidance of Mr. X. Y. Zingh, Manager
Acknowledgement …………………………………………………………….……...i
Candidate Declaration..................................................................................................ii
Certificate…………………………………………………………………………….iii
Abstract.........................................................................................................………...iv
1.2 Layout………………………………………………………………………..2
Chapter 5: Conclusions……………………............................................................40
Appendix …..............................................................................................................45
List of Figures
The list of tables and figures (diagrams, graphics, and illustrations) should follow the list
List of Tables
The margins at the binding (left hand) edge should be not less than 1.25 inches and other
margins like right hand, top and bottom should not be less than 1 inch.
Type should be double line spacing, except for indented quotations or footnotes, where
single line spacing should be used. Typing should be one side of the paper only.
(Tables should be given the number based on their chapters; for example; for chapter 2
they should be Table 2.1, 2.2 and so on.
Table 1.1: Number of lines, relays, variables and constraints for some power systems
Fig. 2.2: Diagram showing near-end and far-end faults for relay