Professional Documents
Culture Documents
Recognition
Certified
(Some models only)
PNP output
type available
Three protection circuits standard on all models Industry’s first*! IP64 rating
PM-25/45/65 SERIES *As of April 2017, in-company survey. PM-25/45 SERIES
All models are standardly equipped with the following Our original integrated molding method has eliminated
protection circuits in their compact bodies. These grooves and gaps on the sensing surface and main
protection circuits minimize the possibility of sensor body, thus reducing the possibility of malfunctions
malfunctions caused by erroneous wiring. caused by splashing water or dust.
1 Reverse supply polarity protection circuit
2 Reverse output polarity protection circuit
3 Output short-circuit protection circuit
APPLICATIONS
Positioning of a pallet Sensing the starting point and overrun Sensing the starting point on a
of a moving body rotating body
Overrun sensing
Dog
Starting
point
The starting
point can be
sensed by
making a slit in
Starting point sensing the rotating
body.
Overrun
sensing
*“Dog” refers to the sensing object for activating the sensor’s detecting operation.
The sensor unit can be installed with one or two M3 screws. NPN output 1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
* M3 screws and washers are not included. Connector attached cable Connector attached bending-resistant cable
PNP output 1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
■M
odels requiring one M3 screw for installation
PM-F25, PM-R25, PM-F65, PM-R65
■M
odels requiring two M3 screws for installation
Models other than above
Resistant to vibrations
and impacts PM-25/45/65 SERIES
The sections where stress concentrates, such as the
connecting section of the cable and internal circuit, are
covered with a resin. This helps prevent malfunctions
caused by vibrations and impacts.
Resin-filled structure
(cross-sectional view)
4 U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
ORDER GUIDE
Type Appearance (mm in) Sensing range Model No. Cable length Output Output operation
PM-K25 1 m 3.281 ft
6 0.236
23.9 12.3
0.941 0.484 PM-K25-C3 3 m 9.843 ft
PNP open-collector
PM-K25-P 1 m 3.281 ft
transistor
PM-L25 1 m 3.281 ft
12 0.472
PM-U25 1 m 3.281 ft
PM-F25 1 m 3.281 ft
PNP open-collector
PM-F25-P 1 m 3.281 ft
transistor
PM-R25 1 m 3.281 ft
OPTIONS
Mounting screw
Designation Model No. Description
• MS-M2
SPECIFICATIONS
Pollution degree 3
(Note 3, 4)
Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 7)
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the figure below, is rotated.
Disc
t = 0.2 mm 0.008 in
1.6 mm 0.063 in 1.6 mm 0.063 in
3) In case the PM-25 series is used at an ambient temperature of +50 °C +122 °F, or more, make sure to mount it on a metal body.
4) Note that the cable of PM-□25-R loses its flexibility when the ambient temperature decreases to about -10 °C +14 F°.
5) The cable of PM-□25-R is a bending-resistant cable usable on a moving base. When the sensor is mounted on a moving base, secure the sensor cable
joint at the unit in place so that stress is not applied to it.
6) When storing PM-□25-R, make sure that the cable does not come into contact with the sensing section or operation indicator.
7) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
6 U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
ORDER GUIDE
Type Appearance (mm in) Sensing range Model No. Cable length Output Output operation
PM-K45 1 m 3.281 ft
NPN open-collector
7 0.276 transistor
PM-K45-C3 3 m 9.843 ft
K type
PM-T45 1 m 3.281 ft
NPN open-collector
transistor
PM-T45-C3 3 m 9.843 ft
T type
13.7 0.539
PM-L45 1 m 3.281 ft
NPN open-collector
transistor
PM-L45-C3 3 m 9.843 ft
L type
14.6 0.575
Compact / Cable type
PM-L45-P 1 m 3.281 ft
26 PNP open-collector
1.024 7 0.276
transistor
PM-L45-P-C3 3 m 9.843 ft
6 mm 0.236 in Incorporated with 2 outputs:
(fixed) Light-ON/Dark-ON
PM-Y45 1 m 3.281 ft
NPN open-collector
14.6 0.575 transistor
PM-Y45-C3 3 m 9.843 ft
Y type
PM-F45 1 m 3.281 ft
NPN open-collector
transistor
PM-F45-C3 3 m 9.843 ft
F type
13 0.512
13.7 21.3 PM-F45-P 1 m 3.281 ft
0.539 0.839 PNP open-collector
transistor
PM-F45-P-C3 3 m 9.843 ft
PM-R45 1 m 3.281 ft
NPN open-collector
13 0.512 transistor
PM-R45-C3 3 m 9.843 ft
R type
Note: The suffix “-C3” in the model No. indicates a 3 m 9.843 ft cable length type.
U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
7
SPECIFICATIONS
NPN output
Item PNP output PM-□45-P PM-□45-P-C3
CE marking directive compliance EMC Directive, RoHS Directive
Pollution degree 3
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Environmental resistance
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 3)
Weight Net weight: 10 g approx., Gross weight: 15 g approx. Net weight: 30 g approx., Gross weight: 35 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the figure below, is rotated.
t = 0.2 mm 0.008 in
1.6 mm 0.063 in 1.6 mm 0.063 in
3) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
8 U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
ORDER GUIDE
Type Appearance (mm in) Sensing range Model No. Output Output operation
NPN open-collector
PM-K65 transistor
K type
7 0.276
26 22.4 PNP open-collector
1.024 0.882 PM-K65-P transistor
NPN open-collector
PM-T65 transistor
13.7 0.539
22.4
0.882 NPN open-collector
16.7 0.657 PM-T65W transistor
PNP open-collector
26 PM-T65W-P transistor
1.024
NPN open-collector
PM-L65 transistor
L type
14.9 0.587
Compact / Connector built-in type
NPN open-collector
PM-F65 transistor
13.5 0.531
22.4
13.4 0.882 PNP open-collector
0.528 PM-F65-P transistor
F type
NPN open-collector
PM-F65W transistor
13 0.512
22.4
13.4 0.882 PNP open-collector
0.528 PM-F65W-P transistor
NPN open-collector
13.5 0.531 PM-R65 transistor
22.4
13.4 0.882 PNP open-collector
0.528 PM-R65-P transistor
R type
NPN open-collector
13 0.512 PM-R65W transistor
22.4
13.4 0.882 PNP open-collector
0.528 PM-R65W-P transistor
Note: P
M-T65W is mounting-compatible with our conventional model “PM-T64W”.
PM-F65W(-P) is mounting-compatible with our conventional model “PM-F54(P)”.
PM-R65W(-P) is mounting-compatible with our conventional model “PM-R54(P)”.
U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
9
OPTIONS
Connector attached cable
Designation Model No. Description
• CN-14A(-R)-C□
CN-14A-C1 Length: 1m 3.281 ft
0.2 mm2 4-core cabtyre cable with
Connector CN-14A-C2 Length: 2m 6.562 ft connector on one end
attached cable CN-14A-C3 Length: 3m 9.843 ft Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-C5 Length: 5m 16.404 ft
SPECIFICATIONS
Compact / Connector built-in type
Type
Mounting-compatible with conventional model (Note 2)
Model No.
Ambient temperature –25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance Fluorescent light: 1,000 ℓx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material Enclosure: PBT, Display section: Polycarbonate
Cable length Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 4)
Weight Net weight: 3 g approx., Gross weight: 3 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, Recommended connector
the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) PM-T65W is mounting-compatible with our conventional model “PM-T64W”. Contact: SPHD-001T-P0.5, Housing: PAP-04V-S
PM-F65W(-P) is mounting-compatible with our conventional model “PM-F54(P)”. (Manufactured by J.S.T. Mfg. Co., Ltd.)
PM-R65W(-P) is mounting-compatible with our conventional model “PM-R54(P)”. Note: Contact the manufacturer for details of the recommended products.
3) The response frequency is the value when the disc, given in the figure below, is rotated.
Recommended crimping tool
Disc 1.8 mm 0.071 in
Model No. : YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.)
Disc
Note: Contact the manufacturer for details of the recommended products.
t = 0.2 mm 0.008 in
1.6 mm 0.063 in 1.6 mm 0.063 in
4) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply
voltage at the end of the cable attached to the sensor is 4.5 V or higher.
10 U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
(Brown) +V Load
Black (Note)
ZD1 (Black) Output 1 Load
Load + 5 to 24 V DC
Sensor circuit
(Note)
Load + – ±10 %
50 mA max. 5 to 24 V DC White (Note)
T r1 ±10 %
(White) Output 2 (Note) –
ZD2
Tr2 50 mA max. Blue
D (Blue) 0 V
Note: Ensure to insulate the unused output wire.
Internal circuit Users’ circuit
Symbols…D: Reverse supply polarity protection diode Color code Output operation
ZD1, ZD2: Surge absorption zener diode Output 1 Black Light-ON
Tr1, Tr2: NPN output transistor
Output 2 White Dark-ON
1 2 3 4
– ±10 %
(Black) Output 1 (Note) + 5 to 24 V DC White (Note)
Tr2 Load
ZD1 50 mA max. – ±10 %
Load Load
(White) Output 2 (Note) Blue
Load
ZD2 (Blue) 0 V
Note: Ensure to insulate the unused output wire.
Internal circuit Users’ circuit
1 2 3 4
2 mm 2 mm
0.079 in 0.079 in
Beam Beam
Light- axis Light- Light- axis Light-
ON ON ON ON
0 1 2 3 4 0 1 2 3 4 0 1 2 3 4 0 1 2 3 4
0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
PM-65 series
Sensing position
Dark- Dark-
ON ON
8.4 mm
0.331 in 7 mm
0.276 in
ℓ
ℓ
2 mm
0.079 in
Beam
Light- axis Light-
ON ON
0 1 2 3 4 0 1 2 3 4
0.039 0.079 0.118 0.157 0.039 0.079 0.118 0.157
Operating point ℓ (mm in) Operating point ℓ (mm in)
PM-45 series
• Never use this product as a sensing device
for personnel protection. • The following conditions must be observed when using
• In case of using sensing devices for personnel screws to mount the sensor unit.
protection, use products which meet laws and
Screw Spring washer Flat washer Tightening torque
standards, such as OSHA, ANSI or IEC etc.,
for personnel protection applicable in each M3 screw 1 pc.
ø6 mm ø0.236 in
0.5 N·m
(small round washer)
region or country.
M3 screws
Plain washer
When using the optional mounting screw set MS-M2, a Outer diameter
ø6 mm ø0.236 in
spring washer is included.
• In case the PM-25 series is used at an ambient
temperature of +50 °C +122 °F, or more, make sure to
mount it on a metal body.
12 U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
18.7 1.6
0.736 Operation indicator 0.063
(Orange) 3.2
13.4 0.126
0.528 8
6 0.315
6 (2 0.079) 0.236
0.236 Operation indicator (Orange)
13.4
5.5 Beam Beam size: 0.528
12.3 0.217 axis 1.2 × 0.8 0.047 × 0.031 2
8 0.315 6 0.079 6
0.484 0.236 0.236
5.5 Beam Beam size:
5 0.197 0.217 axis 10 12 1.2 × 0.8 0.047 × 0.031
1.7
0.067
2-ø3.2 ø0.126 0.394 0.472
mounting holes 4 0.157
ø6
ø0.236 ø2.5 ø0.098 cable ø2.5 ø0.098 cable
2
0.079
PM-K25(-P)
PM-L25(-P)
PM-U25(-P) PM-F25(-P)
PM-R25□ Sensor
Beam 6
axis 0.236
Operation indicator
(Orange)
4
0.157
6.7
0.264
11.7
13.4 1.5 Beam size: 0.461
Operation indicator 0.059 1.2 × 0.8 0.047 × 0.031
(Orange) 0.528 6.2 3
6 (2 0.079) R1.6 0.244 0.118
0.236 R0.063
5.5 Beam
0.217 axis 12
8 0.315 0.472 12.5
2 0.079 0.492
5 0.197 3.2 0.126 ø2
ø0.079
Elongated
ø2.5 ø0.098 cable mounting hole
ø4.8 1.6 0.063 1.95 0.077
ø0.189
PM-R25(-P)
14 U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
PM-T45
PM-K45
26 1.024 3.5
Operation indicator (Orange) 0.138 7
19 0.748 0.276 2-ø3.5 ø0.138 mounting holes
3.5 0.138 7.5 0.295
10 7 0.276 3.2 0.126 7 0.276
0.394
20.6 6
2-elongated mounting holes 0.811 0.236
4 Operation indicator (Orange)
0.157
ø2.5 ø0.098 cable
1.5 5 0.197
0.059
Operation indicator (Orange) ø2.5 ø0.098 cable
19 0.748
13.4 2 Beam size: 6
2-ø3.2 ø0.126 0.528 13.4 Beam size:
mounting holes 6 0.079 1.2 × 0.8 0.047 × 0.031 0.236 0.528 2 1.2 × 0.8 0.047 × 0.031
0.236 6 0.079
Beam 4.5 0.236
8.4 0.331 9 axis 0.177 Beam
14.6 axis 4.5
0.354 12.6 8.4 0.331 0.177 2.5
0.575 0.496 14.6 12.6
7.2 0.283 0.575 0.098
0.496
2 0.079
2 Operation indicator (Orange)
0.079
PM-L45
13.7 13 13.7
0.539 Beam size: 0.512 13
1.2 × 0.8 0.047 × 0.031 Beam size: 0.512 0.539
13.4 7 13.4
0.528 2 0.276 1.2 × 0.8 0.047 × 0.031 7 2 Operation indicator
Operation indicator 0.528
6 0.079 6 0.236 0.276 0.079 6 (Orange)
(Orange) 0.236 6 0.236 0.236
Beam Beam
8.4 0.331 axis axis 8.4 0.331
9 0.354 17.2 17.2 9 0.354
0.677 21.3 21.3 0.677
13.6 7 0.839 0.839 7 13.6
0.535 0.276 0.276 0.535
PM-R45
PM-F45
U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
15
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
7 6 7.4 0.291
0.276 0.236 Beam 6.2 3.2 0.126
axis 0.244
3.5 0.138 13
2-ø3.2 ø0.126 mounting holes 1.6 0.063 0.512
4.1
13.4 0.161
0.528 2 6 Beam size: 1.2 × 0.8 0.047 × 0.031
6 0.079 Operation indicator (Orange) 0.236
0.236
Operation indicator (Orange)
Beam 22.4
8.4 0.331 axis 0.882 Operation indicator (Orange)
22.4 13.8 8.4
3.2 0.126 8.3 0.331 2 Beam
0.882 0.543 axis
0.327 0.079
7.4 0.291
3.7 0.146
13.7 6 13.4
0.539 0.236 0.528 7
2-mounting holes
2 0.079 0.276
0.11 3.7 0.146 Beam 3
20 0.787 axis 0.118
PM-K65(-P) PM-T65(-P)
PM-T65W(-P)
PM-Y65 PM-Y65-P Sensor PM-F65 PM-F65-P PM-L65(-P) Sensor
6.7
Operation indicator (Orange) 0.264 Operation indicator (Orange)
2-ø3.5 ø0.138
mounting holes 3 0.118
6.5 0.256 6 0.236 Beam
7 2.5 0.098 axis
0.276
3.5 0.138
7
22.7 Beam 0.276 6 Beam size: 3
0.894 axis 0.236 1.2 × 0.8 0.047 × 0.031 0.118
Beam size:
Operation indicator (Orange) 1.2 × 0.8 0.047 × 0.031
13.4
13.4 6.5 0.528
0.528 0.256 2.5 6 (2 0.079)
2 ø2.4 ø0.094 0.098 0.236
6 0.079
0.236 Beam
Operation indicator (Orange) 3.2 8.4
Beam 0.331 axis
0.126
14.9 8.4 0.331 axis 12.9 16.3
0.587 3.7 2.1 22.4
0.508 0.642 0.146 0.083 0.882
7.7 8.3
4.1 0.161 0.303 0.327
7
0.276 Elongated mounting hole
13.5
PM-Y65(-P) 0.531
PM-F65(-P)
16 U-shaped Micro Photoelectric Sensor PM-25 SERIES PM-45 SERIES PM-65 SERIES
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
PM-R65(-P)
13.7 L
Operation indicator (Orange) 0.539
35 50
7 1.378 1.969
0.276
8 8
Beam 0.315 0.315
13 axis
0.512
Beam size:
7 1.2 × 0.8 0.047 × 0.031
0.276 2.5 0.098
6.5 0.256 13.4
0.528 ø3.7 ø0.146 cable
6 0.236 Operation indicator (Orange)
(2 0.079) 6
2-ø3.5 ø0.138 0.236
mounting holes Beam • Length L
axis
9 0.354 Model No. Length L
22.4
0.882
11.4 7 0.276 13.6 CN-14A(-R)-C1 1,000 39.370
0.535
0.449 8.3 0.327
CN-14A(-R)-C2 2,000 78.740
PM-R65W(-P)
Disclaimer
The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be
regarded as granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some
intellectual properties, such as patent rights, with respect to such applications, or that the described applications may not infringe any
intellectual property rights, such as patent rights, of a third party.