Professional Documents
Culture Documents
mail:e-mail@miyuki-beads.co.jp
web:www.miyuki-beads.co.jp/englith
Note: Re-sell this instruction is prohibited
TILA Beads instruction Vol.4 WREATH TOP PENDANT
Finished size… About 47cm (1.52ft)∼52cm (1.69ft) (including clasp) Tools… Scissors・Ruler・Pliers・Toothpick
1) Use six 15cm (5.91 in) lengths of nylon thread to make 3 pieces of both【A】and【B】.
String TILA bead, Crystal cut beads (Pink for【A】, Green for【B】), and Delica beads
from ☆ to end as in the picture. Tighten the thread and knot twice. Pass the excess thread
ends through the nearest bead (Crystal cut), then cut off.
☆=Start (Center of nylon thread)
《Larger view》 Thread ends.
《Lager view ※1 》
《Front view》 《Front view》
Crystal cut bead
TILA Beads (Pink) Crystal cut bead
(Green)
Delica bead (Brown) ☆ ☆
1pc Make 3 pieces of 【A】 Make 3 pieces of 【B】
☆
☆ ※1 Enlarged picture of TILA bead
for easier view.
2) Use two 30cm (11.81 in) lengths of nylon thread to make 1 piece of 【C】.
String TILA beads, pearls and Delica beads on two lengths of nylon thread.
Tighten the thread and knot twice. Pass the excess ends through the nearest TILA beads, then cut off.
Use new 30cm (11.81 in) of nylon thread to make 1 piece of 【D】.
String TILA beads, Delica beads and 【A】&【B】at 1), then finish the thread ends the thread the
same as 【C】.
Pearl
1
1 1
Delica bead 1
(Yellow) 1pc
1 TILA bead 1
Thread ends
1 1
1 1
1
Make 1 piece of 【C】
1 1 【A】 ※2
1 【B】 1
※2 Pass through
TILA beads.
1 1 《Front view》
Thread ends
1 1
【C】
2 1 2
※3
2 1 2
2 1 2
2 2
【D】 ※2
2/3
MIYUKI Co., Ltd.
mail:e-mail@miyuki-beads.co.jp
web:www.miyuki-beads.co.jp/englith
Note: Re-sell this instruction is prohibited
TILA Beads instruction Vol.4 WREATH TOP PENDANT
Suede cord
Cord end
Spring
Extender
ring
Oval jump
ring
Cord end
How to attach
a cord end
5 )Cut a 45cm (1.46 inch) of suede cord (The lengths of cord can be adjusted to your desire.)
, then pass through the loop of the pendant at 4). Attach the cord end, then
connect clasp to the cord end.
2/3