Professional Documents
Culture Documents
Electrical equipment
If the indicated message appears on the LCD display when the
Trailer right side
right turn indicator light switch or the hazard warning light
direction signal
switch is turned on, this indicates a short circuit in the
lamp short circuit
circuit. Check the wiring harness and lamp.
to the ground
If, when you turn on the right turn indicator switch or the hazard
warning light switch, the specified lamp turns on, but the
indicated error message appears on the LCD display,
trailer Right side
this means that an excessive power lamp is installed in
direction indicator
Trailer right turn IN_DIG_16(C09); the direction indicator lamp (recommended power range
lamp overload
signal lamp IN_DIG_37(D22); 15 - 180W). Make sure that the wattage of the installed
OUT_24(F01) lamps corresponds to the recommended value of the
instruction.
If, when you turn on the right turn indicator light switch or the
hazard warning light switch, the specified light turns on,
but the indicated error message appears on the LCD
trailer Right side
display, this means that a lamp of too low power is
direction indicator
installed in the turn signal light (recommended power
lamp open circuit
range 15 - 180W) ... Check the lamp, its wattage and the
condition of the wiring, and that the wiring harness is
connected correctly.
If after turning on the side light and pressing the front and rear
fog light switch, the fog lamps and lamps do not turn on, and
Primary vehicle
the specified message appears
Rear fog lamp
about a malfunction, this indicates the presence of a short
short circuit to the
circuit in the circuit.
ground
Check the harness connected to the indicated lamp.
If, after turning on the side lights and pressing the front and rear
fog light switch, the indicated malfunction message appears, this
means that there is an open circuit in the main rear fog light
Primary vehicle
circuit or a lamp of too low power is installed.
rear fog lamp open
Check the lamp, its wattage and the condition of the wiring, and
circuit
that the wiring harness is connected correctly.
31