Professional Documents
Culture Documents
www.knaufinsulation.de
Thickness d 80 100 mm -
RD
Nominal value of the thermal resistance 2,10 2,60 (m²K)/W DIN EN 13162
Design value of the thermal resistance R 2,05 2,56 (m²K)/W DIN 4108-4
CERTIFICATES
Knauf Insulation mineral wool fibers are harmless to health. This is guaranteed by the RAL quality mark.
www.knaufinsulation.de
ADDITIONAL
INFORMATION
Application
Areas of applicationFor thermal and sound insulation as well as fire protection in wood construction. Insulation between rafters and wooden beams; F30
c o n s t r u c t i o n s according to test certificate P-MPA-E-99-092 with rafter or beam spacings of up to 87 cm - regardless of the cladding on the
room side. Insulation between wooden studs of exterior walls and partition walls in timber frame construction as well as for classified fire protection
constructions according to DIN 4102-4. Application abbreviation according to DIN 4108-10: DZ, WH, WTR
Processing
Please observe the respective processing guidelines. In addition, the relevant standards and the recognized rules of technology apply.
Customer service: +49 8571 40-0 Technical Hotline: +49 8571 40-380 Membership no.: 31763 www.ausschreiben.de/katalog/knauf_insulation
All technical data given in this document have been reproduced to the best of our knowledge and belief. They must be adapted to the respective construction situation. Make sure that you use the latest edition of
this information. The responsibility for professional and proper installation and compliance with building regulations rests with the planner and building contractor. Despite the greatest possible care, we accept no
liability for the topicality, correctness, completeness or quality of the information provided. Furthermore, the valid standards and recognized rules of technology apply. Knauf Insulation is grateful for any
suggestions for improvement or information on possible errors.
25.06.2020