Professional Documents
Culture Documents
Reference conditions
2. Power data
Compressor
1. Number of compression stages 1 1 1
2. Male rotor speed r/min 3791 4583 5406
Motors
1. Drive motor efficiency at full load 90.2% 91.0% 91.0%
at no load 84.0% 85.0% 85.0%
Unit
1. Oil capacity (approx.) l 6.75 7.25 7.75
2. Blow off volume l 8.0 8.0 8.0
3. Time to reach 80% blow-off s 30.0 30.0 30.0
4. Cooling air flow referred to air inlet grating m³/s 1.1 1.15 1.2
5. Dimension of compressed air outlet valve (threaded) G 3/4 3/4 3/4
6. Condensate drainpipes
- Manual drain OD / ID mm/mm 6/4 6/4 6/4
- Automatic drain OD / ID mm/mm 8 / 5.5 8 / 5.5 8 / 5.5
- Manual drain air receiver G 1/4 1/4 1/4
7. Electrical cable passage M 50 50 50
8. Canopy dimensions
8.1 Floor mounted Pack
- Length mm 1285 1285 1285
- Width mm 680 680 680
- Height mm 922 922 922
8.2 Floor mounted FF
- Length mm 1770 1770 1770
- Width mm 680 680 680
- Height mm 932 932 932
8.3 Tank mounted Pack / FF
- Length mm 1853 1853 1853
- Width mm 680 680 680
- Height mm 1538 1538 1538
9. Net mass (approx.) - Workplace/ Workplace FF
9.1 Net mass (approx.) - Floor mounted
- Pack kg 375 395 410
- Full Feature kg 440 470 485
9.2 Net mass (approx.) - Tank mounted
- Pack kg 500 520 535
- Full Feature kg 565 595 610
The international ISO 1217 ed. 1996 standard refers to following standards :
- ISO 5167 - British BS 1571 Part 2
- ISO 9300 - American ASME PTC9
- German DIN 1950
Ed.: 00