Professional Documents
Culture Documents
PROCEDURE:
1. Put the zipper facing on the right side of your right front part.
Marked 1 cm to the top, 0.5 cm down as allowance and square down.
2. Stitch the Zipper facing up to crotch curve. Follow your marked and Flip your
zipper facing and sew
5. Get the left side of your front- facing part. Marked 1cm to the top, 0.5 cm down
and square down and fold the left side of your front part. Follow the markings.
6. Put the left side of your front part (folded) above the zipper. Stitch from up to the
tape ends of your zipper
7. Stitch the crotch part of your pants. Start to the bottom stop of your zipper up to
the end of your crotch.
8. Turn the pants to the front-facing side. The zipper should lie flat on the work
surface. Mark where the zipper ends with a pin. Then use chalk or a marking pen
to mark the final stitching line 1¼” from the center front seam. Also mark the
bottom curve, making sure to avoid the zipper base.
Reference:
Thuy Phan. (2021). Zipper Fly Sewing Instructions. Retrieved on October 29, 2023 from
https://www.youtube.com/watch?v=8NAT1SKsyxA&list=PPSV