Professional Documents
Culture Documents
PROCEDURE:
Step 1: Combine the 2 Zipper facing. Sew the curve part only.
Step 2: Turn your zipper facing into right side of the fabric and sew again the curve part.
Step 3: Marked your zipper facing into 1cm as allowance and square down. Put the
zipper facing on the right side of your front part and sew.
Step 6: Get the other part of your zipper facing. The one that you sew in step 1 and 2.
Put it above your zipper. You can use pin to hold your fabric and zipper. Turn it and sew
the left side of the zipper together with the other side of your zipper facing
Sew the left side of the zipper together
with the other side of your zipper facing
Step 7: Get the left side of your front part. Put it above the left side of your zipper. Make
sure that the right and left side of your front part are both even. Then sew the left side of
your zipper
Step 8: Turn the right side of your front part and sew it.
This should be
Sew the right side of your You can follow the stitch in
outcome.
zipper. the top of your zipper
Step 9: In this step, you will now close or attached the both side of your front part. From
the tape ends of your zipper sew until the crotch part.
Iron the zipper fly. Proceed in finishing touches by removing or trimming excess thread
Prepared by:
Angelika Fetalvero
Reference:
Thuy Phan. (2021). Zipper Fly Sewing Instructions. Retrieved on October 29, 2023 from
https://www.youtube.com/watch?v=8NAT1SKsyxA&list=PPSV