Professional Documents
Culture Documents
NICKEL ANODES
GM1828M GM1829M GM601 9M GM6020M
1 SCOPE. These specificationscover the requirements 6.1 Completedcopiesof the GM Material Safety Data Sheet
for four types of nickel anodesfor use in nickel plating solu- and Critical Material Register(availablefrom the engineering
tions. Two are primary (high nickel) products (one with departmentor laboratory) must be submitted with any new
controlled sulfur); and two are processedproducts (one with submissionsor wherea compositionchangehas occurred.
controlledoxygenand one with controlledcarbonand silicon).
7 INSPECTION AND REJECTION. All shipmentsof
2 CHEMICAL COMPOSITION. Shall conform to the material or parts under contract or purchaseorder manufac-
limits shown in Table 1 for the GM number of the product tured to this specificationshall be equivalentin every respect
specified. to the initial samplesapprovedby engineering.There shall be
no changesin either formulation or manufacturingprocesses
3 DESKINNING. Deskinning of processed anodes permittedwithout prior notification and approvalby engineer-
(GM1828M and GM1829M) is optional. When specified by ing. Lack of notification by the supplier constitutesgrounds
purchaser(by appropriatenote on purchaseorder or drawing), for rejection of any shipment.While samplesmay be taken
deskinningshall be accomplishedelectrolyticallyusing hydro- from incoming shipmentsand checkedfor conformanceto this
chloric acid as the skin removal agent, and shall uniformly specification, the supplier shall accept the responsibility for
remove a minimum of 4% by weight of the nickel over the incoming shipmentsmeetingthis specificationwithout depen-
entire length of the anode. denceupon purchaser’sinspection.